San Jacinto, CA 92582 • 92583 • Riverside County • Incorporated City • San Jacinto Valley • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in San Jacinto, CA
Light-gauge steel and metal stud framing in San Jacinto — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: State Street shops, San Jacinto Avenue interiors, Main Street and Ramona Expressway build-outs, and house remodels in 92582 and 92583.
San Jacinto Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a State Street storefront. San Jacinto is an incorporated Riverside County city in the San Jacinto Valley. This page is steel / metal stud framing inside San Jacinto city limits — State Street, San Jacinto Avenue, Main Street, and Ramona Expressway. It is not Hemet, Nuevo, or an unincorporated valley address that only uses a nearby mailing ZIP.
Text “San Jacinto” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in San Jacinto
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 92582 and 92583. This is the skeleton the board hangs on.
Tenant improvement framing
Shop, medical-office, and commercial build-outs on State Street and San Jacinto Avenue when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
State Street, Main Street, and Ramona interiors
Shop partitions, office interiors, and retail walls on State Street, San Jacinto Avenue, Main Street, Ramona Expressway, Ramona Boulevard, and Esplanade Avenue.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing San Jacinto house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a San Jacinto Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | State Street TI, medical-office interiors, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most San Jacinto house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
San Jacinto Streets, ZIPs, and Permits
San Jacinto is an incorporated city in Riverside County. Standard city ZIPs on this page are 92582 and 92583. 92581 is a San Jacinto P.O. Box. Some 92583 mail still says Gilman Hot Springs — that is a postal name, not a separate city. Area code is 951. Permits inside city limits run through the City of San Jacinto Building & Safety Division at 595 S. San Jacinto Avenue, San Jacinto, CA 92583 — (951) 487-7330. Hemet, Beaumont, and unincorporated valley land each use a different desk. Text the street so the bid matches San Jacinto city limits.
State Street is the main commercial spine. San Jacinto Avenue is the civic corridor. Main Street is the older downtown strip. Ramona Expressway, Ramona Boulevard, Esplanade Avenue, Sanderson Avenue, and Soboba Road show up on a lot of plans. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a State Street tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses and open Main Street shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a San Jacinto Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 San Jacinto, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
San Jacinto, CA
This page is steel and metal stud framing in San Jacinto — ZIPs 92582 and 92583 — from our Fairfield shop. City-limit permits run through Building & Safety on San Jacinto Avenue. Need the board hung and finished on the same job? Services → · Perris framing: Perris → · Riverside framing: Riverside →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake San Jacinto address. No claim that we keep a shop on State Street or Main Street. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Hemet, Beaumont, Nuevo, and unincorporated San Jacinto Valley land are different desks. This page is San Jacinto, CA — 92582 and 92583.
San Jacinto Metal Stud FAQs
Do you do steel / metal stud framing in San Jacinto?
Yes. Interior light-gauge metal stud framing in San Jacinto, CA from our Fairfield shop — partitions, State Street and San Jacinto Avenue TIs, Main Street and Ramona interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do San Jacinto houses use metal studs or wood?
Most house walls here are still wood. Metal wins on State Street TIs, medical-office interiors, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on State Street or Main Street?
Yes. Occupied retail and small commercial tenant improvements on State Street, San Jacinto Avenue, and Main Street are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied San Jacinto buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open State Street shop. A full TI is still a construction job — plan rooms.
Is San Jacinto the same as Hemet?
No. San Jacinto is its own incorporated city. Hemet has its own city limits and permit desk. Text the street so the bid matches San Jacinto.
Is Gilman Hot Springs a different city?
No. Gilman Hot Springs is a postal name used with some 92583 mail. It is not a separate city. Text the street so the bid matches San Jacinto city limits.
Do you work State Street, Main Street, Ramona, and Esplanade?
Yes. State Street, San Jacinto Avenue, Main Street, Ramona Expressway, Ramona Boulevard, Esplanade Avenue, and other San Jacinto addresses are on this framing page. Text the street with the photos.
What ZIP does this San Jacinto page cover?
92582 and 92583. 92581 is a P.O. Box. Text the street with the photos so the bid matches the San Jacinto address — not Hemet, Nuevo, or Beaumont.
Who issues the permit in San Jacinto?
City of San Jacinto Building & Safety Division at 595 S. San Jacinto Avenue, San Jacinto, CA 92583. Phone (951) 487-7330. Hemet and unincorporated valley addresses use those desks.
How much does metal stud framing cost in San Jacinto?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need San Jacinto Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099