Perris, CA 92570 • 92571 • Riverside County • Incorporated City • I-215 Corridor • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Perris, CA
Light-gauge steel and metal stud framing in Perris — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: D Street shops, Perris Boulevard interiors, Nuevo Road and Ramona Expressway build-outs, and house remodels in 92570 and 92571.
Perris Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a D Street storefront. Perris is an incorporated Riverside County city. This page is steel / metal stud framing inside Perris city limits — D Street, Perris Boulevard, Nuevo Road, and Ramona Expressway. It is not Moreno Valley, Menifee, March ARB, or an unincorporated address that only uses a Perris mailing ZIP.
Text “Perris” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Perris
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 92570 and 92571. This is the skeleton the board hangs on.
Tenant improvement framing
Shop, warehouse-office, and commercial build-outs on Perris Boulevard and near I-215 when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
D Street, Perris Blvd, and Nuevo interiors
Shop partitions, office interiors, and retail walls on D Street, Perris Boulevard, Nuevo Road, Ramona Expressway, Case Road, and Redlands Avenue.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Perris house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Perris Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Perris Boulevard TI, warehouse-office interiors, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, industrial office TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Perris house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Perris Streets, ZIPs, and Permits
Perris is an incorporated city in Riverside County. Standard city ZIPs on this page are 92570 and 92571. 92572 is a Perris P.O. Box. Some 92570 mail still says Lake Mathews — that is not automatically city-limit work. Area code is 951. Permits inside city limits run through the City of Perris Building & Safety Division at 135 N. D Street, Perris, CA 92570 — (951) 943-5003. Unincorporated addresses that only use a Perris mailing ZIP go to Riverside County, not City Hall. Moreno Valley, Menifee, and March ARB each use a different desk. Text the street so the bid matches Perris city limits.
D Street is the downtown civic spine. Perris Boulevard is the main north-south commercial street. Nuevo Road, Ramona Expressway, Case Road, Redlands Avenue, and Highway 74 show up on a lot of plans. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Perris Boulevard tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses and open I-215 shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Perris Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Perris, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Perris, CA
This page is steel and metal stud framing in Perris — ZIPs 92570 and 92571 — from our Fairfield shop. City-limit permits run through Building & Safety on D Street. Need the board hung and finished on the same job? Services → · Moreno Valley framing: Moreno Valley → · Murrieta framing: Murrieta →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Perris address. No claim that we keep a shop on D Street or Perris Boulevard. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Moreno Valley, Menifee, Lake Elsinore, and March ARB are different places with different desks. This page is Perris, CA — 92570 and 92571.
Perris Metal Stud FAQs
Do you do steel / metal stud framing in Perris?
Yes. Interior light-gauge metal stud framing in Perris, CA from our Fairfield shop — partitions, D Street and Perris Boulevard TIs, Nuevo and Ramona interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Perris houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Perris Boulevard TIs, warehouse-office interiors, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Perris Boulevard or D Street?
Yes. Occupied retail, warehouse-office, and small commercial tenant improvements on Perris Boulevard and D Street are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Perris buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open Perris Boulevard shop. A full TI is still a construction job — plan rooms.
Is a Perris mailing address the same as city limits?
No. Some 92570 mail is unincorporated Lake Mathews or county land. City permits only cover incorporated Perris. Text the street so the bid matches the right desk.
Do you work D Street, Perris Boulevard, Nuevo, and Ramona?
Yes. D Street, Perris Boulevard, Nuevo Road, Ramona Expressway, Case Road, Redlands Avenue, and other Perris addresses are on this framing page. Text the street with the photos.
What ZIP does this Perris page cover?
92570 and 92571. 92572 is a P.O. Box. Text the street with the photos so the bid matches the Perris address — not Moreno Valley, Menifee, or March ARB.
Who issues the permit in Perris?
City of Perris Building & Safety Division at 135 N. D Street, Perris, CA 92570. Phone (951) 943-5003. Unincorporated addresses with a Perris mailing ZIP use Riverside County. Moreno Valley, Menifee, and March ARB use those desks.
How much does metal stud framing cost in Perris?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Perris Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099