Murrieta, CA 92562 • 92563 • Riverside County • Incorporated City • Southwest County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Murrieta, CA
Light-gauge steel and metal stud framing in Murrieta — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Jefferson Avenue shops, Winchester Road interiors, Murrieta Hot Springs Road build-outs, and house remodels in 92562 and 92563.
Murrieta Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Town Square storefront. Murrieta is an incorporated Riverside County city. This page is steel / metal stud framing inside Murrieta city limits — Jefferson Avenue, Winchester Road, Murrieta Hot Springs Road, historic downtown, Greer Ranch, and Los Alamos. It is not Temecula, Wildomar, Menifee, or unincorporated French Valley.
Text “Murrieta” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Murrieta
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 92562 and 92563. This is the skeleton the board hangs on.
Tenant improvement framing
Small commercial and office build-outs on Jefferson Avenue and Winchester Road when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Jefferson, Winchester, and Hot Springs interiors
Shop partitions, office interiors, and retail walls on Jefferson Avenue, Winchester Road, Murrieta Hot Springs Road, California Oaks Road, Los Alamos Road, and Washington Avenue.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Greer Ranch, Los Alamos, Murrieta Oaks, or downtown house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Murrieta Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Jefferson Avenue TI, Winchester Road shops, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, office TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Greer Ranch and Los Alamos house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Murrieta Streets, ZIPs, and Permits
Murrieta is an incorporated city in Riverside County. Standard city ZIPs on this page are 92562 and 92563. 92564 is a Murrieta P.O. Box. Some mail still says Murrieta Hot Springs — that is a postal name, not a separate city. Area code is 951. Permits inside city limits run through the City of Murrieta Building & Safety Division at 1 Town Square, Murrieta, CA 92562 — (951) 461-6062. Applications go through the city’s Citizen Self-Service portal. Temecula, Wildomar, Menifee, and unincorporated French Valley each use a different desk. Text the street so the bid matches Murrieta city limits.
Jefferson Avenue is the main business corridor. Winchester Road (Highway 79) and Murrieta Hot Springs Road are the other commercial spines. California Oaks Road, Los Alamos Road, Washington Avenue, Clinton Keith Road, Whitewood Road, and Margarita Road show up on a lot of plans. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Jefferson Avenue tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses and open Winchester shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Murrieta Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Murrieta, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Murrieta, CA
This page is steel and metal stud framing in Murrieta — ZIPs 92562 and 92563 — from our Fairfield shop. City-limit permits run through Building & Safety at 1 Town Square. Need the board hung and finished on the same job? Services → · Moreno Valley framing: Moreno Valley → · Mira Loma framing: Mira Loma →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Murrieta address. No claim that we keep a shop on Jefferson Avenue or at Town Square. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Temecula, Wildomar, Menifee, Lake Elsinore, and French Valley are different places with different desks. This page is Murrieta, CA — 92562 and 92563.
Murrieta Metal Stud FAQs
Do you do steel / metal stud framing in Murrieta?
Yes. Interior light-gauge metal stud framing in Murrieta, CA from our Fairfield shop — partitions, Jefferson Avenue and Winchester Road TIs, Murrieta Hot Springs interiors, downtown and Greer Ranch house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Murrieta houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Jefferson Avenue TIs, rated partitions, medical and office interiors, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Jefferson or Winchester?
Yes. Occupied retail and small commercial tenant improvements on Jefferson Avenue, Winchester Road, and Murrieta Hot Springs Road are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Murrieta buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open Jefferson / Winchester shop. A full TI is still a construction job — plan rooms.
Is Murrieta Hot Springs a different city?
No. Murrieta Hot Springs is a road and a postal name used with some 92562 / 92563 / 92564 mail. It is not a separate city. Text the street so the bid matches Murrieta city limits — not Temecula or Wildomar.
Do you work Jefferson, Winchester, downtown, and Greer Ranch?
Yes. Jefferson Avenue, Winchester Road, Murrieta Hot Springs Road, Washington Avenue, California Oaks Road, Los Alamos Road, Greer Ranch, and other Murrieta addresses are on this framing page. Text the street with the photos.
What ZIP does this Murrieta page cover?
92562 and 92563. 92564 is a P.O. Box. Text the street with the photos so the bid matches the Murrieta address — not Temecula, Wildomar, Menifee, or French Valley.
Who issues the permit in Murrieta?
City of Murrieta Building & Safety Division at 1 Town Square, Murrieta, CA 92562. Phone (951) 461-6062. Confirm the address is inside city limits before you pull the permit. Temecula, Wildomar, and unincorporated Riverside County use different desks.
How much does metal stud framing cost in Murrieta?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Murrieta Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099