Mira Loma, CA 91752 • Riverside County • Neighborhood of Jurupa Valley • Inland Empire • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Mira Loma, CA
Light-gauge steel and metal stud framing in Mira Loma — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Mission Boulevard shops, Limonite Avenue interiors, Wineville and Hamner jobs, and house remodels in 91752.
Mira Loma Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Mission Boulevard storefront. Mira Loma is a neighborhood name and a postal city — ZIP 91752 — inside Riverside County. Most of the old Mira Loma community became part of Jurupa Valley on July 1, 2011. Part of 91752 also sits in Eastvale. This page is steel / metal stud framing for Mira Loma addresses. It is not Norco, Ontario, Fontana, or the City of Riverside.
Text “Mira Loma” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid and which city desk issues the permit.
Metal Stud Work We Do in Mira Loma
Interior partition walls
Track, studs, and bracing for new rooms, shop layouts, and non-load-bearing walls in 91752. This is the skeleton the board hangs on.
Tenant improvement framing
Small commercial and shop build-outs on Mission Boulevard and Limonite Avenue when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Mission, Limonite, Wineville, and Hamner interiors
Shop partitions, office interiors, and warehouse-office walls on Mission Boulevard, Limonite Avenue, Wineville Avenue, Hamner Avenue, Etiwanda Avenue, and Jurupa Road.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Mira Loma house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Mira Loma Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Mission Boulevard TI, Limonite shop walls, rated assemblies, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, warehouse office TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Mira Loma house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Mira Loma Streets, ZIP, and Permits
Mira Loma is no longer its own unincorporated town. The postal city is still Mira Loma on many 91752 addresses, but the land is inside Jurupa Valley or, on the west edge of the same ZIP, Eastvale. Jurupa Valley also uses 92509. Area code is 951. Permits for Mira Loma addresses inside Jurupa Valley run through the City of Jurupa Valley Building & Safety Department at 8930 Limonite Avenue, Jurupa Valley, CA 92509 — (951) 332-6464. Eastvale addresses that still say Mira Loma / 91752 use the Eastvale city desk, not Jurupa Valley. Ontario and Fontana are San Bernardino County cities with their own desks. Text the street so the bid matches the city, not the mailbox name.
Mission Boulevard and Limonite Avenue are the commercial spines. Wineville Avenue, Hamner Avenue, Etiwanda Avenue, Jurupa Road, Bellegrave Avenue, and Van Buren Boulevard show up on a lot of plans. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Mission Boulevard tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Mira Loma Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Mira Loma, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Mira Loma, CA
This page is steel and metal stud framing for Mira Loma — ZIP 91752 — from our Fairfield shop. Most jobs here pull a Jurupa Valley permit. Need the board hung and finished on the same job? Services → · Rancho Cucamonga framing: Rancho Cucamonga → · Ontario framing: Ontario →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Mira Loma address. No claim that we keep a shop on Mission Boulevard or Limonite. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Mira Loma is not a separate city anymore. Eastvale, Norco, Ontario, Fontana, and the City of Riverside are different places with different desks. This page is Mira Loma, CA 91752.
Mira Loma Metal Stud FAQs
Do you do steel / metal stud framing in Mira Loma?
Yes. Interior light-gauge metal stud framing for Mira Loma, CA 91752 from our Fairfield shop — partitions, Mission Boulevard and Limonite TIs, Wineville and Hamner interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Mira Loma still its own city?
No. Mira Loma is a neighborhood name and a postal city. Most of the old community became part of Jurupa Valley on July 1, 2011. ZIP 91752 is also used in Eastvale. Text the street so the bid matches Jurupa Valley or Eastvale — not a city that no longer exists.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Mira Loma houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Mission and Limonite TIs, rated partitions, warehouse office interiors, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Mission Boulevard or Limonite?
Yes. Occupied retail and small commercial tenant improvements on Mission Boulevard and Limonite Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Mira Loma buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open Mission / Limonite shop. A full TI is still a construction job — plan rooms.
Do you work Mission, Limonite, Wineville, and Hamner?
Yes. Mission Boulevard, Limonite Avenue, Wineville Avenue, Hamner Avenue, Etiwanda Avenue, Jurupa Road, and other 91752 addresses are on this framing page. Text the street with the photos.
What ZIP does this Mira Loma page cover?
91752. Jurupa Valley also uses 92509. Text the street with the photos so the bid matches the Mira Loma address — not Norco, Ontario, Fontana, or downtown Riverside.
Who issues the permit in Mira Loma?
Most Mira Loma / 91752 addresses inside Jurupa Valley use City of Jurupa Valley Building & Safety at 8930 Limonite Avenue, Jurupa Valley, CA 92509 — (951) 332-6464. Eastvale addresses that still say Mira Loma use the Eastvale desk. Ontario and Fontana use those cities’ desks. Text the street.
How much does metal stud framing cost in Mira Loma?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Mira Loma Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099