Rancho Cucamonga, CA 91701 • 91730 • 91737 • 91739 • San Bernardino County • Incorporated City • Inland Empire • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Rancho Cucamonga, CA
Light-gauge steel and metal stud framing in Rancho Cucamonga — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Foothill Boulevard shops, Haven Avenue offices, Victoria Gardens interiors, and house remodels in Alta Loma and Etiwanda.
Rancho Cucamonga Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Foothill Boulevard storefront. Rancho Cucamonga is an incorporated San Bernardino County city — Alta Loma, Cucamonga, and Etiwanda joined in 1977. This page is steel / metal stud framing in Rancho Cucamonga, CA — Foothill Boulevard, Haven Avenue, Base Line Road, and Victoria Gardens. It is not Upland, Fontana, or the City of Ontario.
Text “Rancho” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Rancho Cucamonga
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 91701, 91730, 91737, and 91739. This is the skeleton the board hangs on.
Tenant improvement framing
Small commercial and office build-outs on Foothill Boulevard and Haven Avenue when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Foothill, Haven, and Victoria Gardens interiors
Shop partitions, office interiors, and retail walls on Foothill Boulevard (Historic Route 66), Haven Avenue office parks, Day Creek Boulevard, and Victoria Gardens addresses inside city limits.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Alta Loma, Terra Vista, or Etiwanda house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Rancho Cucamonga Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Foothill Boulevard TI, Haven Avenue offices, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, warehouse office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Alta Loma and Etiwanda house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Rancho Cucamonga Streets, ZIPs, and Permits
Rancho Cucamonga is an incorporated city in San Bernardino County. Standard ZIPs on this page are 91701 (Alta Loma), 91730 (central / Civic Center), 91737 (Alta Loma), and 91739 (Etiwanda). 91729 is a Rancho Cucamonga P.O. Box. Area codes are 909 and 840. Permits inside city limits run through the City of Rancho Cucamonga Building & Safety Services Department at 10500 Civic Center Drive, Rancho Cucamonga, CA 91730 — (909) 477-2710. The city takes permit applications online. Upland, Fontana, and Ontario each have their own desks. Text the street so the bid matches the city, not the neighbor.
Foothill Boulevard is the east-west commercial spine (Historic Route 66). Haven Avenue is the office-park corridor. Base Line Road, Archibald Avenue, Milliken Avenue, Day Creek Boulevard, Etiwanda Avenue, and Arrow Route are the other streets that show up on plans. Victoria Gardens sits at Foothill and Day Creek. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Haven Avenue tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses and open Foothill shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Rancho Cucamonga Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Rancho, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Rancho Cucamonga, CA
This page is steel and metal stud framing in Rancho Cucamonga — ZIPs 91701, 91730, 91737, and 91739 — from our Fairfield shop. Permits inside city limits run through City of Rancho Cucamonga Building & Safety. Need the board hung and finished on the same job? Services → · Ontario framing: Ontario → · Mentone framing: Mentone →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Rancho Cucamonga address. No claim that we keep a shop on Foothill Boulevard or Haven Avenue. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Ontario Mills is in Ontario, across Fourth Street. Upland and Fontana are different cities with different permit desks. This page is Rancho Cucamonga, CA — 91701, 91730, 91737, and 91739.
Rancho Cucamonga Metal Stud FAQs
Do you do steel / metal stud framing in Rancho Cucamonga?
Yes. Interior light-gauge metal stud framing in Rancho Cucamonga, CA from our Fairfield shop — partitions, Foothill Boulevard and Haven Avenue TIs, Victoria Gardens interiors, Alta Loma and Etiwanda house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Rancho Cucamonga houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Foothill and Haven TIs, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame an office or shop on Foothill or Haven?
Yes. Occupied retail, restaurant, and office tenant improvements on Foothill Boulevard, Haven Avenue, and near Victoria Gardens are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Rancho Cucamonga buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open Foothill / Haven shop. A full TI is still a construction job — plan rooms.
Is Alta Loma or Etiwanda a different city?
No. Alta Loma and Etiwanda are neighborhoods inside Rancho Cucamonga. 91701 and 91737 are common Alta Loma ZIPs. 91739 is the common Etiwanda ZIP. Text the street so the bid matches the address.
Do you work Foothill Boulevard, Haven Avenue, and Victoria Gardens?
Yes. Foothill Boulevard, Haven Avenue, Base Line Road, Archibald Avenue, Milliken Avenue, Day Creek Boulevard, Victoria Gardens, and other Rancho Cucamonga addresses are on this framing page. Text the street with the photos.
What ZIP does this Rancho Cucamonga page cover?
91701, 91730, 91737, and 91739. 91729 is a P.O. Box. Text the street with the photos so the bid matches the Rancho Cucamonga address — not Upland, Fontana, or Ontario.
Who issues the permit in Rancho Cucamonga?
City of Rancho Cucamonga Building & Safety Services Department, 10500 Civic Center Drive, Rancho Cucamonga, CA 91730. Phone (909) 477-2710. Permits are applied for online. Upland, Fontana, and Ontario addresses use those cities’ desks — not this one.
How much does metal stud framing cost in Rancho Cucamonga?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Rancho Cucamonga Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099