Soquel, CA 95073 • Santa Cruz County • Unincorporated • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Soquel, CA
Light-gauge steel and metal stud framing in Soquel — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Soquel Village shops, Soquel Drive suites, Porter Street interiors, and house remodels in 95073.
Soquel Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Soquel storefront. Soquel is unincorporated Santa Cruz County — not its own city. This page is steel / metal stud framing in Soquel, CA — Soquel Drive, Porter Street, Soquel–San Jose Road, and South Main Street.
Text “Soquel” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Soquel
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 95073. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, and office build-outs in Soquel Village and along Soquel Drive when the drawing says steel studs. Soquel is mostly houses and a compact village — if the plan names metal, that is the bid. Commercial framing →
Soquel Village, Soquel Drive, and Porter Street interiors
Shop partitions, restaurant walls, and rated assemblies on Soquel Drive, Porter Street, Soquel–San Jose Road, and South Main Street in Soquel.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Soquel house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Soquel Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Soquel Village TI, Soquel Drive shops, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls off Rodeo Gulch, Soquel–San Jose Road, and the neighborhood streets with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Soquel Streets, ZIPs, and Permits
Soquel is an unincorporated community in Santa Cruz County — not an incorporated city. The delivery ZIP on this page is 95073. It uses the 831 area code. Permits in Soquel run through Santa Cruz County Planning / Unified Permit Center at 701 Ocean Street, 4th floor, Santa Cruz. Capitola and Santa Cruz city have their own building desks. Text the street so the bid matches the Soquel address.
Soquel Drive and Porter Street carry the Village. Soquel–San Jose Road and South Main Street tie the village to the hills. Occupied shops, Village TIs, and house remodels change the layout — not the stud spec.
The usual mismatch is treating a Soquel Village tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Soquel Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Soquel, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Soquel Village shop, Porter Street suite, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Soquel, CA
This page is steel and metal stud framing in Soquel — ZIP 95073 — from our Fairfield shop. Permits in Soquel run through Santa Cruz County at 701 Ocean Street. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide → · Capitola framing: Capitola →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Soquel address. No claim that Soquel is an incorporated city. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Capitola, Santa Cruz city, and Aptos are different pages. This page is Soquel.
Soquel Metal Stud FAQs
Do you do steel / metal stud framing in Soquel?
Yes. Interior light-gauge metal stud framing in Soquel, CA from our Fairfield shop — partitions, Soquel Village and Soquel Drive TIs, Porter Street interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Soquel houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Soquel Village TIs, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop in Soquel Village?
Yes. Occupied retail and restaurant TIs in Soquel Village and along Soquel Drive are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Soquel buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Village shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Soquel Village, Soquel Drive, and Porter Street?
Yes. Soquel Drive, Porter Street, Soquel–San Jose Road, South Main Street, and other Soquel addresses in 95073 are on this framing page. Text the street with the photos.
What ZIPs does this Soquel page cover?
95073. Text the street with the photos so the bid matches the Soquel address — not Capitola or Santa Cruz city.
Who issues the permit in Soquel?
Santa Cruz County Planning / Unified Permit Center at 701 Ocean Street, 4th floor, Santa Cruz. Soquel does not have its own city building desk.
How much does metal stud framing cost in Soquel?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Soquel Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099