Capitola, CA 95010 • Santa Cruz County • Incorporated 1949 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Capitola, CA
Light-gauge steel and metal stud framing in Capitola — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Village and Esplanade shops, Capitola Avenue suites, Bay Avenue interiors, and house remodels in 95010.
Capitola Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Capitola storefront. This page is steel / metal stud framing in the City of Capitola, CA — Capitola Avenue, the Esplanade, Bay Avenue, and Monterey Avenue.
Text “Capitola” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Capitola
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 95010. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, and office build-outs in the Village, on the Esplanade, and along Capitola Avenue when the drawing says steel studs. Capitola is a small beach city — if the plan names metal, that is the bid. Commercial framing →
Village, Esplanade, and Capitola Avenue interiors
Shop partitions, restaurant walls, and rated assemblies on Capitola Avenue, the Esplanade, Bay Avenue, and Monterey Avenue inside city limits.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Capitola house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Tight Village access is part of the layout. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Capitola Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Village TI, Esplanade shops, Capitola Avenue suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls off Bay Avenue, Stockton Avenue, and the neighborhood streets with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Capitola Streets, ZIPs, and Permits
Capitola is an incorporated Santa Cruz County city — January 11, 1949. The city delivery ZIP on this page is 95010. Some mail lists 95062, which is Santa Cruz / Live Oak. It uses the 831 area code. Permits inside city limits run through the City of Capitola Building Division at 420 Capitola Avenue. Aptos and Santa Cruz city are different places. Text the street so the bid matches the address.
Capitola Avenue and the Esplanade carry the Village. Bay Avenue and Monterey Avenue tie the upper village and neighborhoods together. Occupied shops, Village TIs, and house remodels change the layout — not the stud spec. Tight beach-town parking is part of the job here.
The usual mismatch is treating an Esplanade tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Capitola Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Capitola, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Village shop, Esplanade suite, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Capitola, CA
This page is steel and metal stud framing in the City of Capitola — ZIP 95010 — from our Fairfield shop. Permits inside city limits run through the City of Capitola at 420 Capitola Avenue. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide → · Aptos framing: Aptos →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Capitola address. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Aptos is unincorporated. Santa Cruz city and Live Oak (95062) are different places. This page is the City of Capitola.
Capitola Metal Stud FAQs
Do you do steel / metal stud framing in Capitola?
Yes. Interior light-gauge metal stud framing in Capitola, CA from our Fairfield shop — partitions, Village and Esplanade TIs, Capitola Avenue interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Capitola houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Village and Esplanade TIs, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop in the Village or on the Esplanade?
Yes. Occupied retail and restaurant TIs in the Village, on the Esplanade, and along Capitola Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Capitola buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Village shop, or an after-hours office. A full TI is still a construction job — plan rooms. Tight beach-town access is part of the schedule.
Do you work the Village, Esplanade, and Capitola Avenue?
Yes. Capitola Avenue, the Esplanade, Bay Avenue, Monterey Avenue, and other addresses inside city limits are on this framing page. Text the street with the photos.
What ZIPs does this Capitola page cover?
95010. Some mail lists 95062, which is Santa Cruz / Live Oak. Text the street with the photos so the bid matches the address inside the city.
Who issues the permit in Capitola?
The City of Capitola Building Division at 420 Capitola Avenue.
How much does metal stud framing cost in Capitola?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Village staging can change the number. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Capitola Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099
