Salida, CA 95368 • Stanislaus County • Unincorporated CDP • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Salida, CA
Light-gauge steel and metal stud framing in Salida — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Broadway shops, Sisk and Pirrone interiors, and house remodels in 95368.
Salida Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Salida storefront. Salida is an unincorporated census-designated place in Stanislaus County, north of Modesto on Highway 99. This page is steel / metal stud framing in Salida, CA — Broadway Avenue, Salida Boulevard, Sisk Road, Pirrone Road, and Kiernan Avenue.
Text “Salida” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Salida
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 95368. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, and shop build-outs on Broadway Avenue and along Sisk Road or Pirrone Road when the drawing says steel studs. Salida sits on the Highway 99 edge of north Modesto — if the plan names metal, that is the bid. Commercial framing →
Broadway, Sisk, and Pirrone interiors
Shop partitions, restaurant walls, and rated assemblies on Broadway Avenue, Salida Boulevard, Sisk Road, Pirrone Road, and Kiernan Avenue in Salida.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Salida house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Salida Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Broadway TI, Sisk Road and Pirrone Road shops, Highway 99 suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls off Toomes Road, Bacon Road, Hammett Road, and the neighborhood streets with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Salida Streets, ZIPs, and Permits
Salida is an unincorporated census-designated place in Stanislaus County. It does not have its own city building desk. The delivery ZIP on this page is 95368. It uses the 209 area code. Permits for Salida addresses run through the Stanislaus County Building Permit Division at 1010 10th Street, Suite 3400, Modesto. Modesto city limits start a few blocks away and use a different desk. Ripon is San Joaquin County. Text the street so the bid matches the desk — and so this is Stanislaus County Salida, not Salida, Colorado.
Broadway Avenue is the older town center. Salida Boulevard and Kiernan Avenue / Highway 219 feed Highway 99. Sisk Road and Pirrone Road hold shops and light industrial next to the freeway. Occupied shops, Broadway TIs, and house remodels change the layout — not the stud spec.
The usual mismatch is treating a Broadway tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Salida Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Salida, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Broadway shop, Sisk Road suite, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Salida, CA
This page is steel and metal stud framing in Salida — ZIP 95368 — from our Fairfield shop. Permits run through Stanislaus County in Modesto. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide → · Modesto framing: Modesto →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Salida address. No claim that we keep a shop on Broadway. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Modesto city limits, Ripon, and Salida, Colorado are different places. This page is Salida, CA 95368.
Salida Metal Stud FAQs
Do you do steel / metal stud framing in Salida?
Yes. Interior light-gauge metal stud framing in Salida, CA from our Fairfield shop — partitions, Broadway, Sisk Road, and Pirrone Road TIs, house interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Salida houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Broadway, Sisk Road, and Pirrone Road TIs, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Broadway?
Yes. Occupied retail and restaurant TIs on Broadway Avenue and along Sisk Road or Pirrone Road are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Salida buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Broadway shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Broadway, Sisk, Pirrone, and Kiernan?
Yes. Broadway Avenue, Salida Boulevard, Sisk Road, Pirrone Road, Kiernan Avenue, and other Salida addresses in 95368 are on this framing page. Text the street with the photos.
What ZIPs does this Salida page cover?
95368. Text the street with the photos so the bid matches the Salida address — not Modesto city limits or Ripon.
Who issues the permit in Salida?
Stanislaus County Building Permit Division at 1010 10th Street, Suite 3400, Modesto. Salida does not have its own city building desk.
How much does metal stud framing cost in Salida?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Salida Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099