Riverbank, CA 95367 • Stanislaus County • Incorporated 1922 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Riverbank, CA
Light-gauge steel and metal stud framing in Riverbank — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Third Street shops, Patterson Road interiors, and house remodels in 95367.
Riverbank Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Riverbank storefront. Riverbank is an incorporated Stanislaus County city on the Stanislaus River — August 23, 1922. This page is steel / metal stud framing in Riverbank, CA — Third Street, Santa Fe Street, Atchison Street / Highway 108, and Patterson Road.
Text “Riverbank” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Riverbank
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 95367. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, and shop build-outs on Third Street and along Patterson Road when the drawing says steel studs. Riverbank is a compact city between Modesto and Oakdale — if the plan names metal, that is the bid. Commercial framing →
Third Street, Santa Fe, and Patterson interiors
Shop partitions, restaurant walls, and rated assemblies on Third Street, Santa Fe Street, Atchison Street / Highway 108, and Patterson Road in Riverbank.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Riverbank house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Riverbank Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Third Street TI, Patterson Road shops, Atchison / Highway 108 suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls off Claus Road, Oakdale Road, Roselle Avenue, Claribel Road, and the neighborhood streets with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Riverbank Streets, ZIPs, and Permits
Riverbank is an incorporated city in Stanislaus County — August 23, 1922. The delivery ZIP on this page is 95367. It uses the 209 area code. Permits inside city limits run through the City of Riverbank Building Division at 6617 Third Street, Riverbank, CA 95367. Modesto and Oakdale have their own desks. Work outside city limits may run through Stanislaus County. Text the street so the bid matches the desk.
Third Street and Santa Fe Street hold downtown. Atchison Street is Highway 108 on the north edge. Patterson Road is the east-west commercial corridor. Claus Road, Oakdale Road, Roselle Avenue, Claribel Road, and Callander Avenue tie neighborhoods to that core. Occupied shops, Third Street TIs, and house remodels change the layout — not the stud spec.
The usual mismatch is treating a Third Street tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Riverbank Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Riverbank, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Third Street shop, Patterson Road suite, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Riverbank, CA
This page is steel and metal stud framing in Riverbank — ZIP 95367 — from our Fairfield shop. Permits inside city limits run through the City of Riverbank Building Division at 6617 Third Street. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide → · Oakdale framing: Oakdale → · Modesto framing: Modesto →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Riverbank address. No claim that we keep a shop on Third Street. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Modesto, Oakdale, and Escalon are different places. This page is Riverbank.
Riverbank Metal Stud FAQs
Do you do steel / metal stud framing in Riverbank?
Yes. Interior light-gauge metal stud framing in Riverbank, CA from our Fairfield shop — partitions, Third Street, Santa Fe Street, and Patterson Road TIs, house interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Riverbank houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Third Street and Patterson Road TIs, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Third Street?
Yes. Occupied retail and restaurant TIs on Third Street, Santa Fe Street, and along Patterson Road are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Riverbank buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Third Street shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Third Street, Santa Fe, Atchison, and Patterson?
Yes. Third Street, Santa Fe Street, Atchison Street / Highway 108, Patterson Road, Claus Road, Oakdale Road, Roselle Avenue, and other Riverbank addresses in 95367 are on this framing page. Text the street with the photos.
What ZIPs does this Riverbank page cover?
95367. Text the street with the photos so the bid matches the Riverbank address — not Modesto or Oakdale.
Who issues the permit in Riverbank?
City of Riverbank Building Division at 6617 Third Street, Riverbank, CA 95367. Riverbank is incorporated and has its own building desk. Work outside city limits may run through Stanislaus County instead — send the street so we bid the right desk.
How much does metal stud framing cost in Riverbank?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Riverbank Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099