Woodland Hills, CA 91364 • 91367 • City of Los Angeles • San Fernando Valley • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Woodland Hills, CA
Light-gauge steel and metal stud framing in Woodland Hills — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Warner Center and Ventura Boulevard shops, Topanga Canyon Boulevard and Canoga Avenue interiors, and house remodels in 91364 and 91367.
Woodland Hills Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Ventura Boulevard storefront. Woodland Hills is a City of Los Angeles neighborhood in the southwestern San Fernando Valley. It is not its own city. This page is steel / metal stud framing at Woodland Hills 91364 and 91367 addresses — Ventura Boulevard, Warner Center, Topanga Canyon Boulevard, Canoga Avenue, Victory Boulevard, and Owensmouth Avenue. It is not Canoga Park, West Hills, Winnetka, Tarzana, or Calabasas.
Text “Woodland Hills” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Woodland Hills
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 91364 and 91367. This is the skeleton the board hangs on.
Warner Center and Ventura TIs
Office, medical, restaurant, and plaza build-outs in Warner Center and on Ventura Boulevard when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Topanga, Canoga, Victory, and Owensmouth interiors
Shop partitions, office interiors, and house walls on Topanga Canyon Boulevard, Canoga Avenue, Victory Boulevard, Owensmouth Avenue, De Soto Avenue, Fallbrook Avenue, and Valley Circle Boulevard.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Woodland Hills house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Woodland Hills Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Warner Center TI, Ventura Boulevard shop, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, office TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Woodland Hills house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Woodland Hills Streets, ZIP, and Permits
Woodland Hills is a City of Los Angeles neighborhood in the southwestern San Fernando Valley. It is not its own city. Street ZIPs on this page are 91364 and 91367. 91365 and 91372 are P.O. Boxes. Area codes are 818 and 747. Permits run through the City of Los Angeles Department of Building and Safety (LADBS). The Valley Development Services Center is at 6262 Van Nuys Boulevard, 2nd Floor, Room 251, Van Nuys, CA 91401. Request inspections at (888) 524-2845 or dial 311. From outside the city, call (213) 473-3231. Use ladbs.org. This is not Calabasas Building and Safety and not a separate Woodland Hills city hall. Text the street so the bid matches Woodland Hills — not Canoga Park, West Hills, Winnetka, Tarzana, or Calabasas.
Warner Center and Ventura Boulevard carry a lot of the commercial work. Topanga Canyon Boulevard, Canoga Avenue, Victory Boulevard, Owensmouth Avenue, De Soto Avenue, Fallbrook Avenue, and Valley Circle Boulevard show up on a lot of plans. Occupied houses and open offices change the layout — not the stud spec.
The usual mismatch is treating a Warner Center tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Woodland Hills Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Woodland Hills, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Woodland Hills, CA
This page is steel and metal stud framing in Woodland Hills — 91364 and 91367, City of Los Angeles, San Fernando Valley — from our Fairfield shop. LADBS Valley plan check is at 6262 Van Nuys Boulevard. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Woodland Hills is its own city. No storefront on Ventura Boulevard. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Canoga Park, West Hills, Winnetka, Tarzana, and Calabasas are different places. This page is Woodland Hills, CA 91364 and 91367.
Woodland Hills Metal Stud FAQs
Do you do steel / metal stud framing in Woodland Hills?
Yes. Interior light-gauge metal stud framing in Woodland Hills, CA from our Fairfield shop — partitions, Warner Center and Ventura TIs, Topanga and Canoga interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Woodland Hills its own city?
No. Woodland Hills is a City of Los Angeles neighborhood. Building permits run through LADBS. The Valley office is at 6262 Van Nuys Boulevard — not a separate Woodland Hills city hall and not Calabasas.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Woodland Hills houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Warner Center TIs, Ventura Boulevard shops, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame an office in Warner Center?
Yes. Occupied office, medical, restaurant, and plaza tenant improvements in Warner Center and on Ventura Boulevard are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Woodland Hills buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open office. A full TI is still a construction job — plan rooms.
Is Woodland Hills the same as Canoga Park or Calabasas?
No. Canoga Park, West Hills, and Winnetka sit north. Tarzana is east. Calabasas and Hidden Hills are west and are their own cities. Text the street so the bid matches Woodland Hills 91364 or 91367.
Do you work Ventura, Warner Center, Topanga, and Canoga?
Yes. Ventura Boulevard, Warner Center, Topanga Canyon Boulevard, Canoga Avenue, Victory Boulevard, Owensmouth Avenue, De Soto Avenue, Fallbrook Avenue, Valley Circle Boulevard, and other 91364 / 91367 addresses are on this framing page. Text the street with the photos.
What ZIP does this Woodland Hills page cover?
91364 and 91367. 91365 and 91372 are P.O. Boxes. Text the street with the photos so the bid matches the Woodland Hills address — not Canoga Park 91303 or Calabasas 91302.
Who issues the permit in Woodland Hills?
City of Los Angeles Department of Building and Safety. Valley Development Services Center: 6262 Van Nuys Boulevard, 2nd Floor, Room 251, Van Nuys, CA 91401. Inspections: (888) 524-2845 or 311. Outside the city: (213) 473-3231. Website: ladbs.org.
How much does metal stud framing cost in Woodland Hills?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Woodland Hills Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099