Valley Village, CA 91607 • City of Los Angeles • San Fernando Valley • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Valley Village, CA
Light-gauge steel and metal stud framing in Valley Village — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Laurel Canyon Boulevard shops, Magnolia and Chandler interiors, Riverside Drive build-outs, and house remodels in 91607.
Valley Village Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Laurel Canyon storefront. Valley Village is a City of Los Angeles neighborhood in the San Fernando Valley. It is not its own city. This page is steel / metal stud framing at Valley Village 91607 addresses — Laurel Canyon Boulevard, Magnolia Boulevard, Chandler Boulevard, Riverside Drive, Burbank Boulevard, Colfax Avenue, and Whitsett Avenue. It is not North Hollywood, Studio City, Sherman Oaks, Valley Glen, or Toluca Lake.
Text “Valley Village” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Valley Village
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 91607. This is the skeleton the board hangs on.
Laurel Canyon and Magnolia TIs
Shop, restaurant, medical, office, and corridor build-outs on Laurel Canyon Boulevard and Magnolia Boulevard when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Chandler, Riverside, Colfax, and Whitsett interiors
Shop partitions, office interiors, courtyard-apartment walls, and house walls on Chandler Boulevard, Riverside Drive, Burbank Boulevard, Colfax Avenue, Whitsett Avenue, Coldwater Canyon Avenue, and Radford Avenue.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Valley Village house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Valley Village Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Laurel Canyon TI, Magnolia shop, Chandler corridor suite, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Valley Village house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Valley Village Streets, ZIP, and Permits
Valley Village is a City of Los Angeles neighborhood in the San Fernando Valley. It is not its own city. The street ZIP on this page is 91607. 91617 is a P.O. Box. Area codes are 818 and 747. Permits run through the City of Los Angeles Department of Building and Safety (LADBS). The Valley Development Services Center is at 6262 Van Nuys Boulevard, 2nd Floor, Room 251, Van Nuys, CA 91401. Request inspections at (888) 524-2845 or dial 311. From outside the city, call (213) 473-3231. Use ladbs.org. This is City of Los Angeles Building and Safety — not a separate Valley Village city hall and not unincorporated Los Angeles County. Text the street so the bid matches Valley Village — not North Hollywood, Studio City, Sherman Oaks, Valley Glen, or Toluca Lake.
Neighborhood Council bounds are Burbank Boulevard on the north, the Hollywood Freeway (SR 170) on the east, the Ventura Freeway (US 101) on the south, and the Tujunga Wash on the west. Laurel Canyon Boulevard and Magnolia Boulevard carry a lot of the commercial work. Chandler Boulevard, Riverside Drive, Burbank Boulevard, Colfax Avenue, Whitsett Avenue, Coldwater Canyon Avenue, and Radford Avenue show up on a lot of plans. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Laurel Canyon tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Valley Village Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Valley Village, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Valley Village, CA
This page is steel and metal stud framing in Valley Village — 91607, City of Los Angeles, San Fernando Valley — from our Fairfield shop. LADBS Valley plan check is at 6262 Van Nuys Boulevard in Van Nuys. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Valley Village is its own city. No 94533 shop ZIP as a Valley Village address. No storefront on Laurel Canyon. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. North Hollywood, Studio City, Sherman Oaks, Valley Glen, and Toluca Lake are different places. Ventura Boulevard south of the 101 is Studio City, not this page. This page is Valley Village, CA 91607.
Valley Village Metal Stud FAQs
Do you do steel / metal stud framing in Valley Village?
Yes. Interior light-gauge metal stud framing in Valley Village, CA from our Fairfield shop — partitions, Laurel Canyon and Magnolia TIs, Chandler and Riverside interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Valley Village its own city?
No. Valley Village is a City of Los Angeles neighborhood in the San Fernando Valley. Building permits run through LADBS — the Valley office is at 6262 Van Nuys Boulevard in Van Nuys — not a separate Valley Village city hall.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Valley Village houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Laurel Canyon TIs, Magnolia and Chandler shops, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Laurel Canyon Boulevard?
Yes. Occupied retail, restaurant, medical, and office tenant improvements on Laurel Canyon Boulevard and Magnolia Boulevard are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Valley Village buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. A full TI is still a construction job — plan rooms.
Is Valley Village the same as North Hollywood or Studio City?
No. Valley Village used to be mapped with North Hollywood; it is now its own Los Angeles neighborhood. Studio City sits south of the 101. Sherman Oaks is west. Valley Glen and Toluca Lake are different places. Text the street so the bid matches Valley Village 91607.
Do you work Laurel Canyon, Magnolia, Chandler, and Riverside?
Yes. Laurel Canyon Boulevard, Magnolia Boulevard, Chandler Boulevard, Riverside Drive, Burbank Boulevard, Colfax Avenue, Whitsett Avenue, Coldwater Canyon Avenue, Radford Avenue, and other 91607 addresses are on this framing page. Text the street with the photos.
What ZIP does this Valley Village page cover?
91607. 91617 is a P.O. Box. Text the street with the photos so the bid matches the Valley Village address — not North Hollywood, Studio City, or Sherman Oaks.
Who issues the permit in Valley Village?
City of Los Angeles Department of Building and Safety. Valley Development Services Center: 6262 Van Nuys Boulevard, 2nd Floor, Room 251, Van Nuys, CA 91401. Inspections: (888) 524-2845 or 311. Outside the city: (213) 473-3231. Website: ladbs.org.
How much does metal stud framing cost in Valley Village?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Valley Village Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099