Torrance, CA 90501–90505 • Incorporated City • South Bay • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Torrance, CA
Light-gauge steel and metal stud framing in Torrance — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Hawthorne Boulevard shops, Torrance Boulevard interiors, Del Amo and PCH build-outs, and house remodels in the City of Torrance.
Torrance Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Torrance Boulevard storefront. Torrance is an incorporated South Bay city in Los Angeles County. This page is steel / metal stud framing at City of Torrance addresses — Hawthorne Boulevard, Torrance Boulevard, Pacific Coast Highway, and Del Amo Boulevard. It is not Redondo Beach, Carson, Gardena, or Lomita.
Text “Torrance” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Torrance
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in the City of Torrance. This is the skeleton the board hangs on.
Hawthorne and Torrance Boulevard TIs
Shop, restaurant, medical, office, and retail build-outs on Hawthorne Boulevard and Torrance Boulevard when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
PCH, Del Amo, and Crenshaw interiors
Shop partitions, office interiors, and house walls on Pacific Coast Highway, Del Amo Boulevard, Crenshaw Boulevard, Carson Street, Sepulveda Boulevard, and Western Avenue.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Torrance house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Torrance Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Hawthorne Boulevard TI, Del Amo retail, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Torrance house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Torrance Streets, ZIP, and Permits
Torrance is an incorporated city in Los Angeles County. Primary street ZIPs on this page are 90501, 90502, 90503, 90504, and 90505. 90506 is El Camino College. 90507–90510 are P.O. Boxes. Area codes are 310 and 424. Permits run through the City of Torrance Building and Safety Division at the Permit Center, 3031 Torrance Boulevard, Torrance, CA 90503. Call (310) 618-5910. Email CDDBuilding@TorranceCA.gov. Inspection line: (310) 618-5901. This is not Redondo Beach Building, Carson Building, or LADBS. Text the street so the bid matches Torrance — not Redondo Beach, Carson, Gardena, or Lomita.
Hawthorne Boulevard and Torrance Boulevard carry a lot of the commercial work. Pacific Coast Highway, Del Amo Boulevard, Crenshaw Boulevard, Carson Street, Sepulveda Boulevard, and Western Avenue show up on a lot of plans. Occupied houses and open Hawthorne shops change the layout — not the stud spec.
The usual mismatch is treating a Hawthorne Boulevard tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Torrance Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Torrance, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Torrance, CA
This page is steel and metal stud framing in the City of Torrance — 90501 through 90505 — from our Fairfield shop. The Permit Center is at 3031 Torrance Boulevard. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No 94534 ZIP — that is not Torrance. No shop on Torrance Boulevard. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Redondo Beach, Carson, Gardena, and Lomita are different places. This page is the City of Torrance, CA.
Torrance Metal Stud FAQs
Do you do steel / metal stud framing in Torrance?
Yes. Interior light-gauge metal stud framing in Torrance, CA from our Fairfield shop — partitions, Hawthorne and Torrance Boulevard TIs, PCH and Del Amo interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Torrance its own city?
Yes. Torrance is an incorporated South Bay city. Building permits inside city limits run through the City of Torrance Building and Safety Division at 3031 Torrance Boulevard, not LADBS or a neighboring city hall.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Torrance houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Hawthorne Boulevard TIs, Del Amo retail, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Hawthorne Boulevard?
Yes. Occupied retail, restaurant, medical, and office tenant improvements on Hawthorne Boulevard and Torrance Boulevard are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Torrance buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open Hawthorne shop. A full TI is still a construction job — plan rooms.
Is Torrance the same as Redondo Beach or Carson?
No. Redondo Beach sits west. Carson sits east. Gardena sits north. Lomita sits south. Text the street so the bid matches the City of Torrance.
Do you work Hawthorne Boulevard, Torrance Boulevard, and Del Amo?
Yes. Hawthorne Boulevard, Torrance Boulevard, Pacific Coast Highway, Del Amo Boulevard, Crenshaw Boulevard, Carson Street, Sepulveda Boulevard, and other City of Torrance addresses are on this framing page. Text the street with the photos.
What ZIP does this Torrance page cover?
90501, 90502, 90503, 90504, and 90505 inside City of Torrance limits. 90506 is El Camino College. 90507–90510 are P.O. Boxes. Text the street with the photos so the bid matches the Torrance address.
Who issues the permit in Torrance?
City of Torrance Building and Safety Division, Permit Center, 3031 Torrance Boulevard, Torrance, CA 90503. Call (310) 618-5910. Email CDDBuilding@TorranceCA.gov. Inspection line: (310) 618-5901. This is not LADBS or Redondo Beach Building.
How much does metal stud framing cost in Torrance?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Torrance Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099