Sun Valley, CA 91352 • City of Los Angeles • San Fernando Valley • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Sun Valley, CA
Light-gauge steel and metal stud framing in Sun Valley — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: San Fernando Road shops and warehouses, Sunland Boulevard interiors, Tuxford Street build-outs, and house remodels in 91352.
Sun Valley Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a San Fernando Road storefront. Sun Valley is a City of Los Angeles neighborhood in the San Fernando Valley — not its own city. This page is steel / metal stud framing at Sun Valley 91352 addresses — San Fernando Road, Sunland Boulevard, Glenoaks Boulevard, and Tuxford Street. It is not North Hollywood, Burbank, Pacoima, or Shadow Hills.
Text “Sun Valley” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Sun Valley
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 91352. This is the skeleton the board hangs on.
San Fernando Road TIs
Shop, warehouse, restaurant, and industrial-corridor build-outs on San Fernando Road when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Sunland, Glenoaks, and Tuxford interiors
Shop partitions, office interiors, and house walls on Sunland Boulevard, Glenoaks Boulevard, Tuxford Street, Lankershim Boulevard, Laurel Canyon Boulevard, and Strathern Street.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Sun Valley house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Sun Valley Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | San Fernando Road TI, warehouse interior, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Sun Valley house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Sun Valley Streets, ZIP, and Permits
Sun Valley is a City of Los Angeles neighborhood in the San Fernando Valley. The postal ZIP on this page is 91352. Area codes are 818 and 747. Permits run through the Los Angeles Department of Building and Safety. The Valley office is 6262 Van Nuys Boulevard, 2nd Floor, Room 251, Van Nuys, CA 91401. Call 311 in the city, or (213) 473-3231 from outside. This is not Burbank Building or a separate Sun Valley city hall. Text the street so the bid matches Sun Valley — not North Hollywood, Burbank, Pacoima, or Shadow Hills.
San Fernando Road is the industrial and commercial spine. Sunland Boulevard, Glenoaks Boulevard, Tuxford Street, Lankershim Boulevard, Laurel Canyon Boulevard, and Strathern Street show up on a lot of plans. I-5 cuts the neighborhood. Occupied houses and open San Fernando Road shops change the layout — not the stud spec.
The usual mismatch is treating a San Fernando Road warehouse wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Sun Valley Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Sun Valley, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Sun Valley, CA
This page is steel and metal stud framing in Sun Valley — ZIP 91352, City of Los Angeles — from our Fairfield shop. Permits run through LADBS in Van Nuys. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Sun Valley is its own city. No shop on San Fernando Road. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. North Hollywood, Burbank, Pacoima, and Shadow Hills are different places. This page is Sun Valley, CA 91352.
Sun Valley Metal Stud FAQs
Do you do steel / metal stud framing in Sun Valley?
Yes. Interior light-gauge metal stud framing in Sun Valley, CA from our Fairfield shop — partitions, San Fernando Road TIs, Sunland and Tuxford interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Sun Valley its own city?
No. Sun Valley is a City of Los Angeles neighborhood in the San Fernando Valley. Building permits run through LADBS. The Valley office is in Van Nuys.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Sun Valley houses use metal studs or wood?
Most house walls here are still wood. Metal wins on San Fernando Road TIs, warehouse interiors, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop or warehouse on San Fernando Road?
Yes. Occupied retail, warehouse, restaurant, and office tenant improvements on San Fernando Road are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Sun Valley buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open San Fernando Road shop. A full TI is still a construction job — plan rooms.
Is Sun Valley the same as North Hollywood or Burbank?
No. North Hollywood sits south. Burbank sits east. Pacoima sits west. Shadow Hills and La Tuna Canyon sit north. Text the street so the bid matches Sun Valley 91352.
Do you work San Fernando Road, Sunland Boulevard, and Tuxford Street?
Yes. San Fernando Road, Sunland Boulevard, Glenoaks Boulevard, Tuxford Street, Lankershim Boulevard, Laurel Canyon Boulevard, Strathern Street, and other 91352 addresses are on this framing page. Text the street with the photos.
What ZIP does this Sun Valley page cover?
91352. Text the street with the photos so the bid matches the Sun Valley address — not North Hollywood, Burbank, or Pacoima.
Who issues the permit in Sun Valley?
Los Angeles Department of Building and Safety. The Valley office is 6262 Van Nuys Boulevard, 2nd Floor, Room 251, Van Nuys, CA 91401. Call 311 in the city, or (213) 473-3231 from outside.
How much does metal stud framing cost in Sun Valley?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Sun Valley Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099