Stevenson Ranch, CA 91381 • Unincorporated Los Angeles County • Santa Clarita Valley • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Stevenson Ranch, CA
Light-gauge steel and metal stud framing in Stevenson Ranch — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Pico Canyon interiors, Stevenson Ranch Parkway shops, Westridge house walls, and Marketplace build-outs in 91381.
Stevenson Ranch Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Pico Canyon storefront. Stevenson Ranch is not a city. It is an unincorporated Santa Clarita Valley community in Los Angeles County, west of I-5. Mail can still say Stevenson Ranch, Valencia, Newhall, or Santa Clarita. This page is steel / metal stud framing at 91381 addresses — Stevenson Ranch Parkway, Pico Canyon Road, The Old Road, and Valencia Boulevard in Westridge. It is not the City of Santa Clarita, not Newhall, and not Castaic.
Text “Stevenson Ranch” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Stevenson Ranch
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 91381. This is the skeleton the board hangs on.
Marketplace and Parkway TIs
Shop, restaurant, medical-office, and small commercial build-outs at Valencia Marketplace and on Stevenson Ranch Parkway when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Pico Canyon, The Old Road, and Westridge interiors
Shop partitions, office interiors, and house walls on Pico Canyon Road, The Old Road, Poe Parkway, Hemingway Avenue, and Valencia Boulevard in Westridge.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Stevenson Ranch or Westridge house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Stevenson Ranch Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Marketplace TI, Parkway shop, Westridge remodel, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or hillside structure that hold the house up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Stevenson Ranch house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Stevenson Ranch Streets, ZIP, and Permits
Stevenson Ranch is an unincorporated community in Los Angeles County. It is not inside the City of Santa Clarita. The postal ZIP on this page is 91381. Mail can still say Stevenson Ranch, Valencia, Newhall, or Santa Clarita. Area code is 661. Permits run through Los Angeles County Public Works Building & Safety, Santa Clarita Valley office, 23757 Valencia Boulevard, Valencia, CA 91355. Call (661) 222-2940. This is not Santa Clarita City Hall at 23920 Valencia Boulevard. Text the street so the bid matches Stevenson Ranch — not Valencia inside the city, Newhall, Saugus, or Castaic.
Stevenson Ranch Parkway and Pico Canyon Road are the main spines. Pico Canyon continues east into Santa Clarita as Lyons Avenue. Stevenson Ranch Parkway continues as McBean Parkway. The Old Road ties Stevenson Ranch proper to Westridge. Valencia Boulevard serves the Westridge side. Valencia Marketplace sits on the commercial edge. Occupied houses and open Marketplace shops change the layout — not the stud spec.
The usual mismatch is treating a Marketplace tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a hillside house up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Stevenson Ranch Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Stevenson Ranch, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, Marketplace TI, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Stevenson Ranch, CA
This page is steel and metal stud framing in unincorporated Stevenson Ranch — ZIP 91381 — from our Fairfield shop. Permits run through LA County Building & Safety on Valencia Boulevard, not Santa Clarita City Hall. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Stevenson Ranch is inside the City of Santa Clarita. No fake city hall. No shop on Pico Canyon Road. No structural steel building. No promise that metal studs hold a hillside house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Valencia inside the city, Newhall, Saugus, Canyon Country, and Castaic are different places. This page is Stevenson Ranch, CA 91381.
Stevenson Ranch Metal Stud FAQs
Do you do steel / metal stud framing in Stevenson Ranch?
Yes. Interior light-gauge metal stud framing in Stevenson Ranch, CA from our Fairfield shop — partitions, Marketplace and Parkway TIs, Westridge house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Stevenson Ranch part of Santa Clarita?
No. Stevenson Ranch is unincorporated Los Angeles County. It sits in the Santa Clarita Valley and west of I-5, but it is not inside the City of Santa Clarita. Permits run through LA County Building & Safety, not Santa Clarita City Hall.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the house up are a different contractor.
Do Stevenson Ranch houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Marketplace TIs, Parkway shops, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop at Valencia Marketplace?
Yes. Occupied retail, restaurant, and medical-office tenant improvements at Valencia Marketplace and on Stevenson Ranch Parkway are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Stevenson Ranch buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open Marketplace shop. A full TI is still a construction job — plan rooms.
Is Stevenson Ranch the same as Valencia or Castaic?
No. Valencia inside the City of Santa Clarita sits east of I-5. Newhall sits southeast. Castaic is another unincorporated community farther north. Westridge is part of the Stevenson Ranch CDP and 91381. Text the street so the bid matches Stevenson Ranch.
Do you work Pico Canyon, Stevenson Ranch Parkway, and The Old Road?
Yes. Pico Canyon Road, Stevenson Ranch Parkway, The Old Road, Valencia Boulevard in Westridge, Poe Parkway, Hemingway Avenue, and other 91381 addresses are on this framing page. Text the street with the photos.
What ZIP does this Stevenson Ranch page cover?
91381. Mail can still say Valencia, Newhall, or Santa Clarita. Text the street with the photos so the bid matches the Stevenson Ranch address — not a city-of-Santa-Clarita street east of I-5.
Who issues the permit in Stevenson Ranch?
Los Angeles County Public Works Building & Safety, Santa Clarita Valley office, 23757 Valencia Boulevard, Valencia, CA 91355. Call (661) 222-2940. This is not Santa Clarita City Hall at 23920 Valencia Boulevard.
How much does metal stud framing cost in Stevenson Ranch?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Stevenson Ranch Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099