South Gate, CA 90280 • Gateway Cities • Los Angeles County • Incorporated 1923 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in South Gate, CA
Light-gauge steel and metal stud framing in South Gate — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Firestone Boulevard shops, Tweedy Boulevard interiors, industrial-park offices, and house remodels in 90280.
South Gate Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Firestone Boulevard storefront. South Gate is an incorporated Gateway City in Los Angeles County. It is not a City of Los Angeles neighborhood. This page is steel / metal stud framing at South Gate 90280 addresses — Firestone Boulevard, Tweedy Boulevard, Long Beach Boulevard, Atlantic Avenue, and Garfield Avenue. It is not Huntington Park, Lynwood, Cudahy, Bell, or Watts.
Text “South Gate” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in South Gate
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 90280. This is the skeleton the board hangs on.
Firestone and Tweedy TIs
Shop, restaurant, medical-office, and small commercial build-outs when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Industrial-park and warehouse offices
Office build-outs inside plants and warehouses, break rooms, and shop partitions on the industrial edges of the city — then hang if the scope includes board.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing South Gate house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a South Gate Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Firestone TI, Tweedy shop, warehouse office, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, warehouse offices, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most South Gate house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
South Gate Streets, ZIP, and Permits
South Gate is an incorporated city in the Gateway Cities of Los Angeles County. The postal ZIP on this page is 90280. Area code is 323. City permits run through South Gate Building & Safety at 8650 California Avenue, South Gate, CA 90280. Call (323) 563-9549. The public counter is Monday–Thursday, 7:30 a.m. to 2:00 p.m. City Hall is closed Fridays. This is not LADBS and not Huntington Park 90255. Text the street so the bid matches South Gate — not Lynwood, Cudahy, Bell, or Watts.
Firestone Boulevard is the main east-west commercial spine. Tweedy Boulevard, Long Beach Boulevard, Atlantic Avenue, Garfield Avenue, Imperial Highway, California Avenue, State Street, and Otis Street show up on a lot of plans. I-710 cuts the city. Occupied houses and open Firestone shops change the layout — not the stud spec.
The usual mismatch is treating a Firestone tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a South Gate Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 South Gate, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, warehouse office, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
South Gate, CA
This page is steel and metal stud framing in the City of South Gate — ZIP 90280 — from our Fairfield shop. City permits run through Building & Safety on California Avenue. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that South Gate is a City of Los Angeles neighborhood. No shop on Firestone Boulevard. No structural steel building. No promise that metal studs hold a warehouse up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Huntington Park, Lynwood, Cudahy, Bell, Watts, Paramount, and Downey are different places. This page is South Gate, CA 90280.
South Gate Metal Stud FAQs
Do you do steel / metal stud framing in South Gate?
Yes. Interior light-gauge metal stud framing in South Gate, CA from our Fairfield shop — partitions, Firestone and Tweedy TIs, industrial-park offices, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is South Gate part of the City of Los Angeles?
No. South Gate is its own incorporated city in Los Angeles County. Permits run through South Gate Building & Safety, not LADBS.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do South Gate houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Firestone TIs, Tweedy shops, warehouse offices, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Firestone or Tweedy?
Yes. Occupied retail, restaurant, medical-office, and small commercial tenant improvements on Firestone Boulevard, Tweedy Boulevard, and Long Beach Boulevard are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied South Gate buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Firestone shop, or a running warehouse office. A full TI is still a construction job — plan rooms.
Is South Gate the same as Huntington Park or Lynwood?
No. Huntington Park sits north and west. Lynwood sits south. Cudahy and Bell sit north and northeast. Watts is a City of Los Angeles neighborhood to the west. Text the street so the bid matches South Gate 90280.
Do you work Firestone, Tweedy, Long Beach Boulevard, and Atlantic?
Yes. Firestone Boulevard, Tweedy Boulevard, Long Beach Boulevard, Atlantic Avenue, Garfield Avenue, Imperial Highway, California Avenue, and other 90280 addresses are on this framing page. Text the street with the photos.
What ZIP does this South Gate page cover?
90280. 90255 is usually Huntington Park. Text the street with the photos so the bid matches the South Gate address — not Lynwood, Cudahy, or Watts.
Who issues the permit in South Gate?
City of South Gate Building & Safety, 8650 California Avenue, South Gate, CA 90280. Call (323) 563-9549. Counter hours are Monday–Thursday, 7:30 a.m. to 2:00 p.m. City Hall is closed Fridays.
How much does metal stud framing cost in South Gate?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need South Gate Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099