Sherman Oaks, CA 91403 • 91423 • City of Los Angeles • San Fernando Valley • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Sherman Oaks, CA
Light-gauge steel and metal stud framing in Sherman Oaks — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Ventura Boulevard shops, Galleria-area interiors, Sepulveda Boulevard build-outs, and house remodels in 91403 and 91423.
Sherman Oaks Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Ventura Boulevard storefront. Sherman Oaks is not its own city. It is a San Fernando Valley neighborhood in the City of Los Angeles, named for Moses Sherman and laid out in 1927. This page is steel / metal stud framing at Sherman Oaks 91403 and 91423 addresses — Ventura Boulevard, Van Nuys Boulevard, Sepulveda Boulevard, Riverside Drive, and Woodman Avenue. It is not Encino, Van Nuys, Studio City, or Valley Village.
Text “Sherman Oaks” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Sherman Oaks
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 91403 and 91423. This is the skeleton the board hangs on.
Tenant improvement framing
Ventura Boulevard shop, medical-office, restaurant, and small commercial build-outs when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Ventura, Sepulveda, and Van Nuys interiors
Shop partitions, office interiors, and retail walls on Ventura Boulevard, Sepulveda Boulevard, Van Nuys Boulevard, Riverside Drive, Woodman Avenue, and around Sherman Oaks Galleria.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Sherman Oaks house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Sherman Oaks Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Ventura Boulevard TI, Galleria-area interiors, medical-office walls, rated partitions, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or hillside structure that hold the house up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Sherman Oaks house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Sherman Oaks Streets, ZIP, and Permits
Sherman Oaks is a City of Los Angeles neighborhood in the San Fernando Valley. The postal ZIPs on this page are 91403 and 91423. 91413 is a Sherman Oaks P.O. Box. 91495 is a unique ZIP. Area codes are 818 and 747. Permits run through the Los Angeles Department of Building and Safety. The Valley desk is the Van Nuys District Office at 6262 Van Nuys Boulevard, 2nd Floor, Room 251, Van Nuys, CA 91401. Call 311 inside the city, or (213) 473-3231 from outside. Inspections: (888) 524-2845. Text the street so the bid matches Sherman Oaks — not Encino, Van Nuys, Studio City, or Valley Village.
Ventura Boulevard is the main east-west commercial spine. Sepulveda Boulevard and Van Nuys Boulevard are the north-south spines. Riverside Drive, Woodman Avenue, Valley Vista Boulevard, and Ventura Canyon Avenue show up on a lot of plans. Sherman Oaks Galleria sits at Ventura and Sepulveda. US-101 and I-405 cut the neighborhood. Occupied houses and open Ventura shops change the layout — not the stud spec.
The usual mismatch is treating a Ventura tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Sherman Oaks Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Sherman Oaks, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Sherman Oaks, CA
This page is steel and metal stud framing in Sherman Oaks — ZIPs 91403 and 91423, City of Los Angeles — from our Fairfield shop. Permits run through LADBS in Van Nuys. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Sherman Oaks city hall. No claim that Sherman Oaks is its own incorporated city. No shop on Ventura Boulevard. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Encino, Van Nuys, Studio City, Valley Village, and Tarzana are different neighborhoods. This page is Sherman Oaks, CA 91403 and 91423.
Sherman Oaks Metal Stud FAQs
Do you do steel / metal stud framing in Sherman Oaks?
Yes. Interior light-gauge metal stud framing in Sherman Oaks, CA from our Fairfield shop — partitions, Ventura Boulevard TIs, Galleria-area interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Sherman Oaks its own city?
No. Sherman Oaks is a neighborhood in the City of Los Angeles. Mail can still say Sherman Oaks. Permits run through LADBS, not a separate city desk.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Sherman Oaks houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Ventura TIs, Galleria-area offices, medical-office interiors, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Ventura or near the Galleria?
Yes. Occupied retail, restaurant, and small commercial tenant improvements on Ventura Boulevard and around Sherman Oaks Galleria are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Sherman Oaks buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open Ventura shop. A full TI is still a construction job — plan rooms.
Is Sherman Oaks the same as Encino, Van Nuys, or Studio City?
No. Encino is west. Van Nuys is north. Studio City is east. Valley Village sits northeast. Text the street so the bid matches Sherman Oaks 91403 or 91423.
Do you work Ventura, Sepulveda, Van Nuys Boulevard, and Riverside?
Yes. Ventura Boulevard, Sepulveda Boulevard, Van Nuys Boulevard, Riverside Drive, Woodman Avenue, Valley Vista Boulevard, and other 91403 / 91423 addresses are on this framing page. Text the street with the photos.
What ZIP does this Sherman Oaks page cover?
91403 and 91423. 91413 is a P.O. Box. 91401 and 91411 are usually Van Nuys. Text the street with the photos so the bid matches the Sherman Oaks address — not Encino, Van Nuys, or Studio City.
Who issues the permit in Sherman Oaks?
Los Angeles Department of Building and Safety. The Valley office is 6262 Van Nuys Boulevard, 2nd Floor, Room 251, Van Nuys, CA 91401. Call 311 in the city, or (213) 473-3231 from outside. Inspections: (888) 524-2845.
How much does metal stud framing cost in Sherman Oaks?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Sherman Oaks Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099