Santa Fe Springs, CA 90670 • Gateway Cities • Los Angeles County • Incorporated 1957 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Santa Fe Springs, CA
Light-gauge steel and metal stud framing in Santa Fe Springs — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Telegraph Road shops, industrial-park offices, Carmenita Road build-outs, and house remodels in 90670.
Santa Fe Springs Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Telegraph Road storefront. Santa Fe Springs is an incorporated city in southeast Los Angeles County. It is a Gateway City. It is not Whittier, Norwalk, Pico Rivera, La Mirada, or Downey. This page is steel / metal stud framing at Santa Fe Springs 90670 addresses — Telegraph Road, Carmenita Road, Norwalk Boulevard, Pioneer Boulevard, and Slauson Avenue.
Text “Santa Fe Springs” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Santa Fe Springs
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 90670. This is the skeleton the board hangs on.
Industrial-park and warehouse TIs
Office build-outs inside warehouses, plant offices, break rooms, and shop partitions when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Telegraph, Carmenita, and Norwalk interiors
Shop partitions, office interiors, and retail walls on Telegraph Road, Carmenita Road, Norwalk Boulevard, Pioneer Boulevard, Slauson Avenue, Florence Avenue, and Imperial Highway.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Santa Fe Springs house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Santa Fe Springs Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Telegraph Road TI, warehouse office, industrial-park interior, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, warehouse offices, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Santa Fe Springs house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Santa Fe Springs Streets, ZIP, and Permits
Santa Fe Springs is an incorporated city in Los Angeles County — a Gateway City in the southeast county industrial belt. The postal ZIP on this page is 90670. 90671 is a Santa Fe Springs P.O. Box. 90605 and 90606 are Whittier. Area code is 562. City permits run through Santa Fe Springs Building & Safety at 11710 E. Telegraph Road, Santa Fe Springs, CA 90670. Call (562) 868-0511, ext. 7560. This is not LADBS in Van Nuys and not Norwalk City Hall. Text the street so the bid matches Santa Fe Springs — not Whittier, Norwalk, Pico Rivera, La Mirada, or Downey.
Telegraph Road is the main commercial spine. Carmenita Road, Norwalk Boulevard, Pioneer Boulevard, Slauson Avenue, Florence Avenue, Imperial Highway, Rosecrans Avenue, Alondra Boulevard, Santa Fe Springs Road, Washington Boulevard, Bloomfield Avenue, and Orr and Day Road show up on a lot of plans. I-5 and I-605 cut the city. Occupied houses and open industrial parks change the layout — not the stud spec.
The usual mismatch is treating a warehouse office wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a building up. Occupied shops and running plants need a clean layout, backing for cabinets and racks, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Santa Fe Springs Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Santa Fe Springs, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, warehouse office, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Santa Fe Springs, CA
This page is steel and metal stud framing in the City of Santa Fe Springs — ZIP 90670 — from our Fairfield shop. City permits run through Building & Safety on Telegraph Road. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Santa Fe Springs is a City of Los Angeles neighborhood. No shop on Telegraph Road. No structural steel building. No promise that metal studs hold a warehouse up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Whittier, Norwalk, Pico Rivera, La Mirada, Downey, Cerritos, and West Whittier–Los Nietos are different places. This page is Santa Fe Springs, CA 90670 — not Santa Fe, New Mexico.
Santa Fe Springs Metal Stud FAQs
Do you do steel / metal stud framing in Santa Fe Springs?
Yes. Interior light-gauge metal stud framing in Santa Fe Springs, CA from our Fairfield shop — partitions, Telegraph Road TIs, industrial-park offices, warehouse interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Santa Fe Springs part of the City of Los Angeles?
No. Santa Fe Springs is its own incorporated city in Los Angeles County. It joined as a city in 1957. Permits run through Santa Fe Springs Building & Safety, not LADBS.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Santa Fe Springs houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Telegraph Road TIs, warehouse offices, industrial-park interiors, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a warehouse office or shop on Telegraph or Carmenita?
Yes. Occupied industrial parks, warehouse offices, retail, and small commercial tenant improvements on Telegraph Road and Carmenita Road are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Santa Fe Springs buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open shop, or a running warehouse office. A full TI is still a construction job — plan rooms.
Is Santa Fe Springs the same as Whittier or Norwalk?
No. Whittier sits north and east. Norwalk sits west. Pico Rivera is northwest. La Mirada and Cerritos sit south. Downey is west. Text the street so the bid matches Santa Fe Springs 90670.
Is this Santa Fe, New Mexico?
No. This page is Santa Fe Springs, California — ZIP 90670, Los Angeles County. Different city. Different state.
Do you work Telegraph, Carmenita, Norwalk Boulevard, and Pioneer?
Yes. Telegraph Road, Carmenita Road, Norwalk Boulevard, Pioneer Boulevard, Slauson Avenue, Florence Avenue, Imperial Highway, Santa Fe Springs Road, and other 90670 addresses are on this framing page. Text the street with the photos.
What ZIP does this Santa Fe Springs page cover?
90670. 90671 is a P.O. Box. 90605 and 90606 are Whittier. Text the street with the photos so the bid matches the Santa Fe Springs address — not Whittier, Norwalk, or Pico Rivera.
Who issues the permit in Santa Fe Springs?
City of Santa Fe Springs Building & Safety, 11710 E. Telegraph Road, Santa Fe Springs, CA 90670. Call (562) 868-0511, ext. 7560. Inspections are requested about 24 hours ahead. This is not LADBS and not Norwalk or Whittier City Hall.
How much does metal stud framing cost in Santa Fe Springs?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Santa Fe Springs Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099