San Fernando, CA 91340 • Los Angeles County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in San Fernando, CA
Light-gauge steel and metal stud framing in the City of San Fernando — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Downtown at San Fernando Road and Maclay, the San Fernando Mall, Truman and Brand corridors, and house rooms on the old numbered-street grid. A Mall TI and a Brand Boulevard Craftsman remodel are not the same stud job.
San Fernando Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a San Fernando storefront. This page is steel / metal stud framing in the City of San Fernando, CA 91340 — Downtown on San Fernando Road, Maclay Avenue, and Truman Street; Brand Boulevard and San Fernando Mission Boulevard; Glenoaks; First Street and Celis; and homes on 3rd, 5th, 7th, 8th, Workman , Huntington, and the older grid inside city limits.
Text “San Fernando” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in San Fernando
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 91340. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, office, and Mall build-outs on San Fernando Road, Maclay, Truman, and Brand. If the drawing says steel studs, that is the bid. Commercial framing →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing San Fernando house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a San Fernando Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Downtown TI, San Fernando Mall partitions, Truman industrial interiors, rated commercial walls, or a house remodel that needs a flat plane for Level 4 / Level 5 | You need beams and columns that hold the building up — that is structural steel, a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller mixed-use walls, door-heavy TI, First Street industrial rooms, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most San Fernando house walls with no commercial spec — numbered-street bedrooms, Brand Boulevard Craftsman rooms, later in-town interiors | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete, block, or older Downtown walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Downtown vs Truman Corridor vs the House Grid
San Fernando is its own city — ZIP 91340, about 2.4 square miles in the northeast San Fernando Valley, surrounded by Los Angeles neighborhoods. It is not Pacoima, not Sylmar, and not “the Valley” as a whole. Downtown still holds the civic core at San Fernando Road and Maclay Avenue, plus the San Fernando Mall, Library Plaza, and Brand. Truman Street and First Street take industrial and railroad-side interiors. Numbered streets and Brand Boulevard take older houses, including Craftsman stock.
The usual mismatch is treating a Mall or Maclay tenant wall like a bedroom 2×4 — or promising a factory-flat skim on a house wall that was never framed straight. Valley heat and hard sidelight off San Fernando Road will show cheap framing the first afternoon the paint dries. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge.
Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a San Fernando Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 San Fernando, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
San Fernando, CA
This page is steel and metal stud framing in the City of San Fernando — ZIP 91340, Los Angeles County, from our Fairfield shop. Permits run through the City of San Fernando. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake San Fernando address. No structural steel building. No promise that metal studs hold the house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is the City of San Fernando — not every Valley ZIP that shares the name.
San Fernando Metal Stud FAQs
Do you do steel / metal stud framing in San Fernando?
Yes. Interior light-gauge metal stud framing in the City of San Fernando, CA 91340 from our Fairfield shop — partitions, TI walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this the San Fernando Valley or the City of San Fernando?
This page is the City of San Fernando — ZIP 91340. Pacoima, Sylmar, Mission Hills, and the rest of the Valley are different places. Text the street so we bid the right city.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams and columns that hold the building up are a different contractor.
Do San Fernando houses use metal studs or wood?
Most house walls here are still wood. Metal wins on commercial TI, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on San Fernando Road or the Mall?
Yes. Occupied retail and restaurant TIs on San Fernando Road, Maclay, Truman, and Brand are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied San Fernando buildings?
Yes. Floors are protected and the layout is planned around an open shop or an occupied house. A full TI is still a construction job — plan rooms.
Do you work Downtown, on Maclay, and on Brand?
Yes. San Fernando Road, Maclay Avenue, Truman Street, Brand Boulevard, San Fernando Mission Boulevard, Glenoaks, First Street, Celis, and the numbered-street grid are on the same framing page. Text the street with the photos.
How much does metal stud framing cost in San Fernando?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need San Fernando Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099