Ridgecrest, CA 93555 • Kern County • Indian Wells Valley • Incorporated 1963 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Ridgecrest, CA
Light-gauge steel and metal stud framing in Ridgecrest — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: China Lake Boulevard shops, downtown Ridgecrest Boulevard interiors, California Avenue build-outs, and house remodels in 93555.
Ridgecrest Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a China Lake Boulevard storefront. Ridgecrest is an incorporated city in eastern Kern County, in the Indian Wells Valley next to Naval Air Weapons Station China Lake. It is not the base and it is not Bakersfield. This page is steel / metal stud framing at Ridgecrest 93555 addresses — China Lake Boulevard, Ridgecrest Boulevard, California Avenue, Inyokern Road, and Coso Avenue. It is not Inyokern, Trona, Johannesburg, California City, or Bakersfield.
Text “Ridgecrest” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Ridgecrest
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 93555. This is the skeleton the board hangs on.
China Lake Boulevard TIs
Shop, restaurant, office, and medical build-outs on China Lake Boulevard when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Ridgecrest Blvd, California, and Inyokern interiors
Shop partitions, office interiors, and house walls on Ridgecrest Boulevard, California Avenue, Inyokern Road, Coso Avenue, Drummond Avenue, Norma Street, and Gateway Boulevard.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Ridgecrest house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Ridgecrest Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | China Lake Boulevard TI, downtown shop, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, office TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Ridgecrest house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Ridgecrest Streets, ZIP, and Permits
Ridgecrest is an incorporated city in eastern Kern County. It incorporated on November 29, 1963. The street ZIP on this page is 93555. 93556 is a P.O. Box. Area codes are 760 and 442. Permits run through the City of Ridgecrest Building Department at 100 W California Avenue, Ridgecrest, CA 93555. Call (760) 499-5072. Email permits@ridgecrest-ca.gov. Hours are Monday–Thursday 7:30 AM–5:30 PM; Friday is closed. Website: ridgecrest-ca.gov. This is not Kern County Building and not a China Lake base permit office. Text the street so the bid matches Ridgecrest — not Inyokern, Trona, Johannesburg, California City, or Bakersfield.
China Lake Boulevard carries a lot of the commercial work. Ridgecrest Boulevard, California Avenue, Inyokern Road, Coso Avenue, Drummond Avenue, Norma Street, Gateway Boulevard, and College Heights Boulevard show up on a lot of plans. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a China Lake Boulevard tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Ridgecrest Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Ridgecrest, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Ridgecrest, CA
This page is steel and metal stud framing in Ridgecrest — 93555, City of Ridgecrest, Kern County — from our Fairfield shop. Building Department is at 100 W California Avenue. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Ridgecrest is China Lake Naval Air Weapons Station. No claim this is Bakersfield. No storefront on China Lake Boulevard. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Inyokern, Trona, Johannesburg, California City, and Bakersfield are different places. This page is Ridgecrest, CA 93555.
Ridgecrest Metal Stud FAQs
Do you do steel / metal stud framing in Ridgecrest?
Yes. Interior light-gauge metal stud framing in Ridgecrest, CA from our Fairfield shop — partitions, China Lake Boulevard TIs, downtown interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Ridgecrest the same as China Lake?
No. Ridgecrest is its own incorporated city. China Lake is the naval weapons station next door. City permits run through Ridgecrest Building Department at 100 W California Avenue — not the base and not Kern County.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Ridgecrest houses use metal studs or wood?
Most house walls here are still wood. Metal wins on China Lake Boulevard TIs, downtown shops, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on China Lake Boulevard?
Yes. Occupied retail, restaurant, office, and medical tenant improvements on China Lake Boulevard are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Ridgecrest buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. A full TI is still a construction job — plan rooms.
Is Ridgecrest the same as Inyokern or Bakersfield?
No. Inyokern sits west. Trona and Johannesburg sit nearby. California City is south. Bakersfield is a different city across the valley. Text the street so the bid matches Ridgecrest 93555.
Do you work China Lake Blvd, Ridgecrest Blvd, and California Ave?
Yes. China Lake Boulevard, Ridgecrest Boulevard, California Avenue, Inyokern Road, Coso Avenue, Drummond Avenue, Norma Street, Gateway Boulevard, College Heights Boulevard, and other 93555 addresses are on this framing page. Text the street with the photos.
What ZIP does this Ridgecrest page cover?
93555. 93556 is a P.O. Box. Text the street with the photos so the bid matches the Ridgecrest address — not Inyokern.
Who issues the permit in Ridgecrest?
City of Ridgecrest Building Department, 100 W California Avenue, Ridgecrest, CA 93555. Call (760) 499-5072. Email permits@ridgecrest-ca.gov. Hours: Monday–Thursday 7:30 AM–5:30 PM; Friday closed.
How much does metal stud framing cost in Ridgecrest?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Ridgecrest Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099