Reseda, CA 91335 • Los Angeles • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Reseda, CA
Light-gauge steel and metal stud framing in Reseda — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Reseda Boulevard shops, Sherman Way and Vanowen corridors, Saticoy interiors, and postwar house rooms on Canby, Darby, and Lindley. A Sherman Way TI and a Victory-side remodel are not the same stud job.
Reseda Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Reseda storefront. This page is steel / metal stud framing in Reseda, CA 91335 — Reseda Boulevard, Sherman Way, Vanowen Street, Victory Boulevard, Saticoy Street, Strathern, Tampa, Wilbur, Lindley, Canby, and Darby, between Victory and Roscoe on the west Valley grid.
Text “Reseda” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Reseda
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 91335. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, and office build-outs on Reseda Boulevard, Sherman Way, and Vanowen. If the drawing says steel studs, that is the bid. Commercial framing →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Reseda house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Reseda Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Reseda Boulevard TI, Sherman Way retail, Vanowen offices, rated commercial walls, or a house remodel that needs a flat plane for Level 4 / Level 5 | You need beams and columns that hold the building up — that is structural steel, a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, door-heavy restaurant TI, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Reseda house walls with no commercial spec — postwar ranch rooms on Canby, Darby, Lindley, and the numbered Valley grid | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Reseda Boulevard vs Sherman Way vs the House Grid
Reseda is a Los Angeles neighborhood in the west San Fernando Valley — ZIP 91335 — between Tarzana, Northridge, and Winnetka. It is not Tarzana and it is not Northridge. Reseda Boulevard is the north–south spine. Sherman Way and Vanowen take shops, offices, and apartments. Victory marks the Tarzana line; Roscoe marks the Northridge line. Saticoy, Strathern, Canby, Darby, Lindley, Tampa, and Wilbur take the postwar house grid.
The usual mismatch is treating a Sherman Way tenant wall like a bedroom 2×4 — or promising a factory-flat skim on a ranch wall that was never framed straight. Valley heat and hard sidelight off Reseda Boulevard will show cheap framing the first afternoon the paint dries. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge.
Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Reseda Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Reseda, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Reseda, CA
This page is steel and metal stud framing in Reseda — ZIP 91335, a Los Angeles neighborhood, from our Fairfield shop. Permits run through the City of Los Angeles (LADBS). Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Reseda address. No structural steel building. No promise that metal studs hold the house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Reseda — not Tarzana south of Victory and not Northridge north of Roscoe.
Reseda Metal Stud FAQs
Do you do steel / metal stud framing in Reseda?
Yes. Interior light-gauge metal stud framing in Reseda, CA 91335 from our Fairfield shop — partitions, TI walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Reseda its own city?
No. Reseda is a Los Angeles neighborhood in the west San Fernando Valley. Permits run through LADBS. Tarzana, Northridge, and Winnetka are different places — text the street so we bid the right parcel.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams and columns that hold the building up are a different contractor.
Do Reseda houses use metal studs or wood?
Most house walls here are still wood. Metal wins on commercial TI, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Reseda Boulevard or Sherman Way?
Yes. Occupied retail and restaurant TIs on Reseda Boulevard, Sherman Way, and Vanowen are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Reseda buildings?
Yes. Floors are protected and the layout is planned around an open shop or an occupied house. A full TI is still a construction job — plan rooms.
Do you work Reseda Boulevard, Sherman Way, and Saticoy?
Yes. Reseda Boulevard, Sherman Way, Vanowen, Victory, Saticoy, Strathern, Tampa, Wilbur, Lindley, Canby, and Darby are on the same framing page. Text the street with the photos.
How much does metal stud framing cost in Reseda?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Reseda Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099