Rancho Palos Verdes, CA 90275 • Los Angeles County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Rancho Palos Verdes, CA
Light-gauge steel and metal stud framing in Rancho Palos Verdes — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Miraleste and Palos Verdes Drive East rooms, Eastview interiors on Western Avenue, Crest Road houses, and civic or shop work on Hawthorne Boulevard. A hillside remodel and a Western Avenue TI are not the same stud job.
Rancho Palos Verdes Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Rancho Palos Verdes storefront. This page is steel / metal stud framing in Rancho Palos Verdes, CA 90275 — Miraleste Drive, Palos Verdes Drive East, Palos Verdes Drive South, Palos Verdes Drive West, Hawthorne Boulevard, Crest Road, Western Avenue in Eastview, and rooms toward Portuguese Bend and the Civic Center.
Text “RPV” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Rancho Palos Verdes
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 90275. This is the skeleton the board hangs on.
Tenant improvement framing
Office, civic, and shop build-outs on Hawthorne Boulevard and Western Avenue. If the drawing says steel studs, that is the bid. Commercial framing →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing RPV house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Rancho Palos Verdes Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Hawthorne or Western Avenue TI, civic interiors, rated commercial walls, or a house remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or a hillside structure that holds the house up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, door-heavy TI, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most RPV house walls with no commercial spec — Miraleste rooms, Crest interiors, PV Drive East bedrooms | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Miraleste vs Eastview vs Crest and the Drive
Rancho Palos Verdes is its own city on the Palos Verdes Peninsula — ZIP 90275 — next to Palos Verdes Estates, Rolling Hills Estates, Rolling Hills, Torrance, and San Pedro. It is not Palos Verdes Estates and it is not San Pedro. Miraleste and Palos Verdes Drive East take the east-slope houses above the harbor. Eastview sits on Western Avenue. Crest Road and Palos Verdes Drive South and West take bluff and ridge rooms. Hawthorne Boulevard holds civic and commercial interiors. Portuguese Bend is coastal open space and hillside housing — not a downtown grid.
Marine air and salt do not make metal magic. Galvanized light-gauge steel is not food for termites and it does not twist like wet lumber. It will still rust if the coating is cut and the wall stays wet. Interior studs do not hold a hillside house on moving ground. The usual mismatch is treating a Hawthorne office wall like a bedroom 2×4 — or promising a factory-flat skim on a 1960s ranch that was never framed straight. Occupied houses need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with.
Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Rancho Palos Verdes Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 RPV, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Rancho Palos Verdes, CA
This page is steel and metal stud framing in Rancho Palos Verdes — ZIP 90275, Los Angeles County, from our Fairfield shop. Permits run through the City of Rancho Palos Verdes. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake RPV address. No structural steel building. No promise that metal studs hold a hillside house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Rancho Palos Verdes — not Palos Verdes Estates, Rolling Hills, or San Pedro.
Rancho Palos Verdes Metal Stud FAQs
Do you do steel / metal stud framing in Rancho Palos Verdes?
Yes. Interior light-gauge metal stud framing in Rancho Palos Verdes, CA 90275 from our Fairfield shop — partitions, TI walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this Palos Verdes Estates or San Pedro?
No. This page is the City of Rancho Palos Verdes. Palos Verdes Estates, Rolling Hills Estates, Rolling Hills, and San Pedro are different cities. Text the street so we bid the right place.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and hillside structure that hold the house up are a different contractor.
Do RPV houses use metal studs or wood?
Most house walls here are still wood. Metal wins on commercial TI, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Will ocean air rust metal studs?
Galvanizing helps. Standing water and cut coating do not. Metal studs are not a submarine and they are not a mold-proof building by themselves. Keep the cavity dry and close the wall the right way.
Do you work occupied RPV houses?
Yes. Floors are protected and the layout is planned around an occupied house. A whole-house partition job is still a construction job — plan rooms.
Do you work Miraleste, Eastview, and Crest?
Yes. Miraleste Drive, Palos Verdes Drive East, Palos Verdes Drive South, Palos Verdes Drive West, Hawthorne Boulevard, Crest Road, and Western Avenue in Eastview are on the same framing page. Text the street with the photos.
How much does metal stud framing cost in Rancho Palos Verdes?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Rancho Palos Verdes Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099