Pomona, CA 91766–91768 • Los Angeles County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Pomona, CA
Light-gauge steel and metal stud framing in Pomona — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Garey and Holt shops, Mission Boulevard interiors, Lincoln Park rooms, and Phillips Ranch houses. A downtown TI and a Ranch Hills remodel are not the same stud job.
Pomona Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Pomona storefront. This page is steel / metal stud framing in Pomona, CA — Downtown and Garey Avenue in 91766, Lincoln Park and Holt Avenue in 91767, Ganesha Hills and campus-side work in 91768, plus Phillips Ranch houses, Towne Avenue, Indian Hill, Mission Boulevard, and Foothill.
Text “Pomona” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Pomona
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 91766–91768. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, and office build-outs on Garey, Holt, Mission, and Towne. If the drawing says steel studs, that is the bid. Commercial framing →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Pomona house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Pomona Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Downtown Garey TI, Holt and Mission shops, campus-side offices, rated commercial walls, or a house remodel that needs a flat plane for Level 4 / Level 5 | You need beams and columns that hold the building up — that is structural steel, a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, door-heavy restaurant TI, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Pomona house walls with no commercial spec — Phillips Ranch rooms, Lincoln Park bungalows, Ganesha Hills interiors | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Brick, block, or older downtown walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Downtown Garey vs Phillips Ranch vs Lincoln Park
Pomona is its own city in eastern Los Angeles County — ZIPs 91766, 91767, and 91768 — between Claremont, La Verne, Diamond Bar, Chino, and Ontario. It is not Claremont and it is not Diamond Bar. Downtown and Garey Avenue take shops, offices, and older commercial interiors. Holt Avenue and Mission Boulevard carry more corridor TI. Lincoln Park holds Craftsman and early-1900s houses. Phillips Ranch is the planned south-side community. Ganesha Hills and campus-side streets sit in 91768.
The usual mismatch is treating a Garey tenant wall like a bedroom 2×4 — or promising a factory-flat skim on a bungalow wall that was never framed straight. Inland heat and hard sidelight off Holt will show cheap framing the first afternoon the paint dries. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge.
Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Pomona Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Pomona, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Pomona, CA
This page is steel and metal stud framing in Pomona — ZIP 91766, 91767, and 91768, Los Angeles County, from our Fairfield shop. Permits run through the City of Pomona. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Pomona address. No structural steel building. No promise that metal studs hold the house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Pomona — not Claremont, La Verne, or Diamond Bar.
Pomona Metal Stud FAQs
Do you do steel / metal stud framing in Pomona?
Yes. Interior light-gauge metal stud framing in Pomona, CA 91766–91768 from our Fairfield shop — partitions, TI walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams and columns that hold the building up are a different contractor.
Do Pomona houses use metal studs or wood?
Most house walls here are still wood. Metal wins on commercial TI, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Garey or Holt?
Yes. Occupied retail and restaurant TIs on Garey Avenue, Holt Avenue, Mission Boulevard, and Towne Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Pomona buildings?
Yes. Floors are protected and the layout is planned around an open shop or an occupied house. A full TI is still a construction job — plan rooms.
Do you work Downtown, Phillips Ranch, and Lincoln Park?
Yes. Garey Avenue, Holt Avenue, Mission Boulevard, Towne Avenue, Indian Hill, Foothill, Phillips Ranch, Lincoln Park, and Ganesha Hills are on the same framing page. Text the street with the photos.
How much does metal stud framing cost in Pomona?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Pomona Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099