Placentia, CA 92870 • North Orange County • Incorporated City • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Placentia, CA
Light-gauge steel and metal stud framing in Placentia — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Old Town shops, Chapman Corridor interiors, Kraemer Boulevard suites, and house remodels. A Placentia mailing label and a Fullerton or Anaheim job are not the same city hall.
Placentia Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Placentia storefront. This page is steel / metal stud framing in Placentia, CA 92870 — Chapman Avenue, Kraemer Boulevard, Yorba Linda Boulevard, Orangethorpe Avenue, Placentia Avenue, Bradford Avenue, Crowther Avenue, and Rose Drive.
Text “Placentia” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Placentia
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 92870. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, and office build-outs on Chapman Avenue, Kraemer Boulevard, and Yorba Linda Boulevard. If the drawing says steel studs, that is the bid. Commercial framing →
Old Town and Packing House interiors
Shop partitions, restaurant walls, and rated assemblies near Old Town, Crowther Avenue, Bradford Avenue, and the Chapman Corridor around City Hall.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Placentia house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Placentia Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Old Town TI, Chapman Corridor shops, Kraemer and Yorba Linda interiors, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or building structure that hold the roof up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, mixed-use interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls in Alta Vista, La Jolla, and the tracts off Rose Drive and Orangethorpe with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Old Town vs Chapman vs Yorba Linda Blvd
Placentia is an incorporated North Orange County city — ZIP 92870, with 92871 as a P.O. box — east of the 57 and north of the 91. Fullerton sits west. Anaheim sits south. Brea sits north. Yorba Linda sits east. It is not Fullerton and it is not Anaheim. Neighbor ZIPs such as 92807 can sit against the line, so a Placentia mailing address can still sit in the wrong city. Permits inside city limits run through the City of Placentia Building and Safety Division at 401 East Chapman Avenue. Sharing the Placentia-Yorba Linda school district does not share a building department. Text the street so we bid the right desk.
Chapman Avenue is the civic cut through City Hall, the water tower, and the corridor from Placentia Avenue to Kraemer Boulevard. Kraemer Boulevard and Yorba Linda Boulevard carry the north-south and east-west commercial traffic. Orangethorpe Avenue, Placentia Avenue, Bradford Avenue, Crowther Avenue, and Rose Drive pick up Old Town, the Packing House district, and more house streets. Old Town sits south of Chapman around Santa Fe and Bradford. The Packing House / Crowther strip sits toward the 57.
The usual mismatch is treating an Old Town tenant wall like a bedroom 2×4 — or hanging a Level 5 restaurant finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Placentia Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Placentia, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Old Town shop, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Placentia, CA
This page is steel and metal stud framing in Placentia — ZIP 92870, an incorporated North Orange County city, from our Fairfield shop. Permits inside city limits run through the City of Placentia, not Fullerton, Anaheim, Brea, or Yorba Linda. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Placentia address. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Placentia — not Fullerton, Anaheim, Brea, Yorba Linda, or Orange.
Placentia Metal Stud FAQs
Do you do steel / metal stud framing in Placentia?
Yes. Interior light-gauge metal stud framing in Placentia, CA 92870 from our Fairfield shop — partitions, Old Town TI walls, Chapman Corridor interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Placentia the same as Fullerton, Anaheim, or Yorba Linda?
No. Placentia is its own incorporated city. Fullerton is west. Anaheim is south. Brea is north. Yorba Linda is east. Sharing a school district with Yorba Linda does not share a city hall. Text the street so we bid the right desk.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and building structure that hold the roof up are a different contractor.
Do Placentia houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Old Town TIs, Chapman Corridor shops, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Chapman or Kraemer?
Yes. Occupied retail and restaurant TIs on Chapman Avenue, Kraemer Boulevard, Yorba Linda Boulevard, and in Old Town are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Placentia buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Old Town shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Chapman, Kraemer, Yorba Linda Blvd, and Crowther?
Yes. Chapman Avenue, Kraemer Boulevard, Yorba Linda Boulevard, Orangethorpe Avenue, Placentia Avenue, Bradford Avenue, Crowther Avenue, and Rose Drive are on the same framing page. Text the street with the photos.
Who issues the permit in Placentia?
The City of Placentia Building and Safety Division at 401 East Chapman Avenue. Fullerton, Anaheim, Brea, and Yorba Linda are different desks — that is why the street matters.
How much does metal stud framing cost in Placentia?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Placentia Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099