Paramount, CA 90723 • Los Angeles County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Paramount, CA
Light-gauge steel and metal stud framing in Paramount — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Paramount Boulevard shops, Somerset and Alondra interiors, Rosecrans offices, and house rooms off Garfield and Downey Avenue. A corridor TI and a postwar remodel are not the same stud job.
Paramount Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Paramount storefront. This page is steel / metal stud framing in Paramount, CA 90723 — Paramount Boulevard, Somerset Boulevard, Alondra Boulevard, Rosecrans Avenue, Garfield Avenue, Lakewood Boulevard, Artesia Boulevard, Century Boulevard, Downey Avenue, and Orizaba.
Text “Paramount” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Paramount
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 90723. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, office, and light-industrial interiors on Paramount Boulevard, Somerset, and Alondra. If the drawing says steel studs, that is the bid. Commercial framing →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Paramount house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Paramount Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Paramount Boulevard TI, Somerset and Alondra shops, rated commercial walls, or a house remodel that needs a flat plane for Level 4 / Level 5 | You need beams and columns that hold the building up — that is structural steel, a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, door-heavy restaurant TI, industrial interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Paramount house walls with no commercial spec — rooms off Garfield, Downey Avenue, Orizaba, and the numbered grid | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Paramount Boulevard vs Somerset vs the House Grid
Paramount is its own city in Los Angeles County — ZIP 90723 — between Downey, Bellflower, Compton, Lynwood, South Gate, and Long Beach. It is not Downey and it is not Bellflower. Paramount Boulevard is the north–south spine. Somerset Boulevard and Alondra Boulevard take shops, offices, and light-industrial interiors. Rosecrans, Garfield, Lakewood Boulevard, Artesia, and Century take more corridor work. Downey Avenue and Orizaba take house streets.
The usual mismatch is treating a Somerset tenant wall like a bedroom 2×4 — or promising a factory-flat skim on a postwar house wall that was never framed straight. Inland heat and hard sidelight off Paramount Boulevard will show cheap framing the first afternoon the paint dries. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge.
Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Paramount Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Paramount, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Paramount, CA
This page is steel and metal stud framing in Paramount — ZIP 90723, Los Angeles County, from our Fairfield shop. Permits run through the City of Paramount. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Paramount address. No structural steel building. No promise that metal studs hold the house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Paramount — not Downey, Bellflower, or Compton.
Paramount Metal Stud FAQs
Do you do steel / metal stud framing in Paramount?
Yes. Interior light-gauge metal stud framing in Paramount, CA 90723 from our Fairfield shop — partitions, TI walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams and columns that hold the building up are a different contractor.
Do Paramount houses use metal studs or wood?
Most house walls here are still wood. Metal wins on commercial TI, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Paramount Boulevard or Somerset?
Yes. Occupied retail, restaurant, and light-industrial interiors on Paramount Boulevard, Somerset Boulevard, Alondra Boulevard, and Rosecrans Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Paramount buildings?
Yes. Floors are protected and the layout is planned around an open shop or an occupied house. A full TI is still a construction job — plan rooms.
Do you work Paramount Boulevard, Somerset, and Alondra?
Yes. Paramount Boulevard, Somerset Boulevard, Alondra Boulevard, Rosecrans Avenue, Garfield Avenue, Lakewood Boulevard, Artesia Boulevard, Century Boulevard, Downey Avenue, and Orizaba are on the same framing page. Text the street with the photos.
How much does metal stud framing cost in Paramount?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Paramount Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099