Palmdale, CA 93550–93552 • Los Angeles County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Palmdale, CA
Light-gauge steel and metal stud framing in Palmdale — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Palmdale Boulevard shops, Sierra Highway offices, Rancho Vista interiors, and house rooms on Avenue S and 47th Street East. A boulevard TI and a tract remodel are not the same stud job.
Palmdale Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Palmdale storefront. This page is steel / metal stud framing in Palmdale, CA — downtown and civic 93550 on Palmdale Boulevard and Sierra Highway; west-side Rancho Vista and Anaverde in 93551; and east-side Pearland rooms in 93552 on 47th Street East and Avenue S.
Text “Palmdale” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Palmdale
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 93550–93552. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, and office build-outs on Palmdale Boulevard, Sierra Highway, and Rancho Vista Boulevard. If the drawing says steel studs, that is the bid. Commercial framing →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Palmdale house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Palmdale Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Palmdale Boulevard TI, Sierra Highway offices, Rancho Vista shops, rated commercial walls, or a house remodel that needs a flat plane for Level 4 / Level 5 | You need beams and columns that hold the building up — that is structural steel, a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, door-heavy restaurant TI, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Palmdale house walls with no commercial spec — Rancho Vista, Anaverde, and Pearland bedrooms | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Palmdale Boulevard vs Rancho Vista vs East Palmdale
Palmdale is its own city in the Antelope Valley — Los Angeles County — ZIPs 93550, 93551, and 93552. It is not Lancaster and it is not Quartz Hill. Downtown and civic work sit in 93550 on Palmdale Boulevard and Sierra Highway. Rancho Vista Boulevard and Anaverde sit west in 93551. Pearland and east-side tracts sit in 93552 on 47th Street East and Avenue S. Avenue P, Avenue Q, Avenue R, and 10th Street West fill the grid.
High desert heat and hard sidelight off Palmdale Boulevard will show cheap framing the first afternoon the paint dries. Metal studs do not twist like wet lumber and they are not food for termites. They still need a dry cavity and a straight plane. The usual mismatch is treating a boulevard tenant wall like a bedroom 2×4 — or promising a factory-flat skim on a tract wall that was never framed straight. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with.
Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Palmdale Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Palmdale, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Palmdale, CA
This page is steel and metal stud framing in Palmdale — ZIP 93550, 93551, and 93552, Los Angeles County, from our Fairfield shop. Permits run through the City of Palmdale. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Palmdale address. No structural steel building. No promise that metal studs hold the house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Palmdale — not Lancaster, Quartz Hill, or Lake Los Angeles.
Palmdale Metal Stud FAQs
Do you do steel / metal stud framing in Palmdale?
Yes. Interior light-gauge metal stud framing in Palmdale, CA 93550–93552 from our Fairfield shop — partitions, TI walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this Lancaster?
No. This page is the City of Palmdale. Lancaster is a different city to the north. Quartz Hill and Lake Los Angeles are different places. Text the street so we bid the right parcel.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams and columns that hold the building up are a different contractor.
Do Palmdale houses use metal studs or wood?
Most house walls here are still wood. Metal wins on commercial TI, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Palmdale Boulevard or Rancho Vista?
Yes. Occupied retail and restaurant TIs on Palmdale Boulevard, Sierra Highway, and Rancho Vista Boulevard are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Palmdale buildings?
Yes. Floors are protected and the layout is planned around an open shop or an occupied house. A full TI is still a construction job — plan rooms.
Do you work Palmdale Boulevard, Rancho Vista, and Avenue S?
Yes. Palmdale Boulevard, Sierra Highway, Rancho Vista Boulevard, 10th Street West, Avenue P, Avenue Q, Avenue R, Avenue S, and 47th Street East are on the same framing page. Text the street with the photos.
How much does metal stud framing cost in Palmdale?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Palmdale Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099