Moorpark, CA 93021 • Ventura County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Moorpark, CA
Light-gauge steel and metal stud framing in Moorpark — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: High Street shops, Los Angeles Avenue interiors, Moorpark Avenue build-outs, and house remodels in 93021.
Moorpark Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a High Street storefront. Moorpark is its own incorporated city in Ventura County. It is not Simi Valley and it is not unincorporated county land. This page is steel / metal stud framing at City of Moorpark addresses — with 93021 as the lead ZIP on this page — High Street, Los Angeles Avenue, Moorpark Avenue, Princeton Avenue, and Science Drive. It is not Simi Valley, Thousand Oaks, Camarillo, or Fillmore.
Text “Moorpark” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Moorpark
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 93021 City of Moorpark addresses. This is the skeleton the board hangs on.
High Street and Los Angeles Avenue TIs
Shop, restaurant, office, and medical build-outs on High Street and Los Angeles Avenue / Highway 118 when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Moorpark Avenue, Princeton, and Science Drive interiors
Shop partitions, office interiors, and house walls on Moorpark Avenue, Princeton Avenue, Science Drive, Spring Road, Walnut Street, and Bard Street.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Moorpark house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Moorpark Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | High Street TI, Los Angeles Avenue shop, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Moorpark house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Moorpark Streets, ZIP, and Permits
Moorpark is an incorporated city in Ventura County. This page leads with 93021. There is also a Moorpark PO Box ZIP, 93020. Area code is 805. Permits for City of Moorpark addresses run through the City of Moorpark Building & Safety Division at 323 Science Drive, Moorpark, CA 93021. Call (805) 517-6272. Inspection hotline: (805) 517-6274. Building Official: (805) 517-6276. City Hall: (805) 517-6200. Email: building@moorparkca.gov. Fax: (805) 532-2536. Website: moorparkca.gov. Apply and schedule inspections on the SHOP portal. Hours are Monday–Thursday 7:30 a.m.–1:00 p.m. walk-in and 1:00 p.m.–5:30 p.m. by appointment; Friday 8:00 a.m.–1:00 p.m. walk-in and 1:00 p.m.–5:00 p.m. by appointment, closed alternate Fridays. The city requires a City of Moorpark business registration permit for contractors working inside city limits. Ventura County RMA Building & Safety is a different office — that is for unincorporated Ventura County land.
Simi Valley sits east on 93065. Thousand Oaks sits south on 91360. Camarillo sits west. Fillmore sits north. Text the street so the bid matches City of Moorpark — not Ventura County RMA, not Simi Valley, not Thousand Oaks.
High Street and Los Angeles Avenue / Highway 118 carry a lot of the commercial work. Moorpark Avenue, Princeton Avenue, Science Drive, Spring Road, Walnut Street, Bard Street, Highway 23, and the Metrolink station area show up on a lot of plans. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a High Street tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Moorpark Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Moorpark, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Moorpark, CA
This page is steel and metal stud framing in Moorpark — 93021 lead ZIP, City of Moorpark, Ventura County — from our Fairfield shop. Building & Safety is at 323 Science Drive. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that City of Moorpark is Simi Valley or Thousand Oaks. No Ventura County RMA hall for city addresses. No storefront on High Street. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Simi Valley, Thousand Oaks, Camarillo, and Fillmore are different places. This page is City of Moorpark, CA, with 93021 as the lead ZIP — text the street so the permit office matches the address.
Moorpark Metal Stud FAQs
Do you do steel / metal stud framing in Moorpark?
Yes. Interior light-gauge metal stud framing in Moorpark, CA from our Fairfield shop — partitions, High Street and Los Angeles Avenue TIs, Moorpark Avenue interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Moorpark the same as Simi Valley or Thousand Oaks?
No. The City of Moorpark is its own incorporated city. Simi Valley sits east on 93065. Thousand Oaks sits south on 91360. Building permits for this page run through City of Moorpark Building & Safety at 323 Science Drive — not Ventura County RMA for unincorporated land.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Moorpark houses use metal studs or wood?
Most house walls here are still wood. Metal wins on High Street TIs, Los Angeles Avenue shops, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on High Street or Los Angeles Avenue?
Yes. Occupied retail, restaurant, office, and medical tenant improvements on High Street, Los Angeles Avenue / Highway 118, and Moorpark Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Moorpark buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. A full TI is still a construction job — plan rooms.
Is Moorpark the same as Camarillo or Fillmore?
No. Camarillo sits west. Fillmore sits north. Simi Valley sits east. Text the street so the bid matches City of Moorpark.
Do you work High Street, Los Angeles Avenue, Moorpark Avenue, and Princeton?
Yes. High Street, Los Angeles Avenue / Highway 118, Moorpark Avenue, Princeton Avenue, Science Drive, Spring Road, Highway 23, and other City of Moorpark addresses are on this framing page. Text the street with the photos.
What ZIP does this Moorpark page cover?
This page leads with 93021. There is also a Moorpark PO Box ZIP, 93020. Text the street with the photos so the bid matches the City of Moorpark address — not Simi Valley 93065.
Who issues the permit in Moorpark?
City of Moorpark Building & Safety, 323 Science Drive, Moorpark, CA 93021. Call (805) 517-6272. Inspection hotline: (805) 517-6274. Email building@moorparkca.gov. Ventura County RMA Building & Safety is a different office for unincorporated land.
How much does metal stud framing cost in Moorpark?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. The City of Moorpark also requires a city business registration permit before a permit is pulled for work inside city limits.
Need Moorpark Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099