Menifee, CA 92584–92587 • Riverside County • Incorporated 2008 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Menifee, CA
Light-gauge steel and metal stud framing in Menifee — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Newport Road shops, McCall Boulevard suites, I-215 interiors, and house remodels. Menifee is Riverside County. Sun City, Quail Valley, and Romoland are neighborhoods here — not separate city halls.
Menifee Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Menifee storefront. This page is steel / metal stud framing in Menifee, CA — Newport Road, McCall Boulevard, Scott Road, Bradley Road, Haun Road, and the I-215 corridor.
Text “Menifee” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street still decides which desk reviews the wall.
Metal Stud Work We Do in Menifee
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 92584, 92585, 92586, and 92587. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, medical, and office build-outs on Newport Road, McCall Boulevard, Haun Road, and the I-215 frontage. If the drawing says steel studs, that is the bid. Commercial framing →
Town-center and plaza interiors
Shop partitions, medical-office walls, and rated assemblies on Newport Road, McCall Boulevard near the 215, Sun City Boulevard, and Menifee Road.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Menifee house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Menifee Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Newport Road TI, McCall Boulevard shops, I-215 frontage interiors, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, medical offices, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls in Sun City, Quail Valley, Romoland, Menifee Lakes, and the tracts off Scott, Bradley, Antelope, and Menifee Road with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Sun City vs Quail Valley vs the City Line
Menifee is an incorporated southwest Riverside County city — October 1, 2008 — with ZIPs 92584, 92585, 92586, and 92587 and area code 951. It sits in the Inland Empire on I-215, not in Orange County. Perris sits north. Murrieta sits south. Lake Elsinore and Wildomar sit west. Canyon Lake is its own incorporated city on the west edge. Winchester and Homeland sit east as unincorporated county. Permits inside city limits run through the City of Menifee Building & Safety / Permit Center at 29844 Haun Road, 92586.
The city was assembled from older communities: Sun City, Quail Valley, Romoland, and Menifee Lakes. Those names still show on mail and maps. They do not get their own building department. Canyon Lake is the exception — that is a different city hall. A Sun City, Arizona search is a different state. Text the street so we bid the right desk.
Newport Road, McCall Boulevard, Scott Road, Bradley Road, Haun Road, Menifee Road, Antelope Road, Goetz Road, Sun City Boulevard, and Highway 74 carry the shops and through traffic. Domenigoni Parkway, Garbani Road, and Bundy Canyon Road pick up more house streets and new tracts. Occupied shops, 55+ interiors, and new-tract houses change the layout — not the stud spec.
The usual mismatch is treating a Newport Road tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house up. Occupied houses, open Newport shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Menifee Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Menifee, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Newport shop, McCall suite, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Menifee, CA
This page is steel and metal stud framing in Menifee — ZIPs 92584, 92585, 92586, and 92587, an incorporated Riverside County city, from our Fairfield shop. Permits inside city limits run through the City of Menifee, not Murrieta, Perris, Lake Elsinore, Canyon Lake, Wildomar, or unincorporated Winchester. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Menifee address. No structural steel building. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Menifee — not Murrieta, Perris, Lake Elsinore, Canyon Lake, Wildomar, or Sun City, Arizona.
Menifee Metal Stud FAQs
Do you do steel / metal stud framing in Menifee?
Yes. Interior light-gauge metal stud framing in Menifee, CA from our Fairfield shop — partitions, Newport Road and McCall Boulevard TIs, Sun City and Quail Valley interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Sun City its own city?
No. Sun City in this valley is a Menifee community. Quail Valley and Romoland are also inside Menifee city limits. Canyon Lake is a separate city. Sun City, Arizona is a different state.
Is Menifee in Orange County?
No. Menifee is in Riverside County. I-215 and Highway 74 run through town. The permit desk is City of Menifee at 29844 Haun Road, not a county island and not Murrieta.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Menifee houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Newport and McCall TIs, shop and medical interiors, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Newport, McCall, or the 215?
Yes. Occupied retail, restaurant, and medical TIs on Newport Road, McCall Boulevard, Haun Road, and the I-215 frontage are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Menifee buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Newport shop, a Sun City interior, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Sun City, Quail Valley, and Romoland?
Yes. Those names are Menifee addresses when they sit inside city limits. Menifee Lakes, Scott Road tracts, and Newport corridor suites are on the same framing page. Text the street with the photos.
Who issues the permit in Menifee?
The City of Menifee Building & Safety / Permit Center at 29844 Haun Road, CA 92586. Murrieta, Perris, Lake Elsinore, Canyon Lake, Wildomar, and unincorporated Winchester are different desks — that is why the street matters.
How much does metal stud framing cost in Menifee?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Menifee Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099