Maywood, CA 90270 • Incorporated 1924 • Los Angeles County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Maywood, CA
Light-gauge steel and metal stud framing in Maywood — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Slauson Avenue shops, Atlantic Boulevard build-outs, Maywood Avenue interiors, and house remodels in 90270.
Maywood Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — not a Slauson Avenue storefront. Maywood is an incorporated Gateway City in Los Angeles County — not Bell, not Vernon, and not Huntington Park. It has its own Building Division at City Hall, 4319 E. Slauson Avenue. 90270 is the street ZIP for the city. This page is steel / metal stud framing at City of Maywood 90270 addresses — Slauson Avenue, Atlantic Boulevard, Eastern Avenue, and Maywood Avenue. The street decides the bid.
Text “Maywood” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Maywood
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in Maywood 90270 addresses. This is the skeleton the board hangs on.
Slauson Avenue TIs
Shop, restaurant, office, and commercial build-outs on Slauson Avenue when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Atlantic Boulevard interiors
Retail, office, and shop partitions on Atlantic Boulevard near I-710 access, Fishburn Avenue, and Loma Vista. Occupied buildings change the layout — not the stud spec.
Eastern Avenue and industrial-edge walls
Warehouse-office, shop, and tenant walls on Eastern Avenue, District Boulevard, Randolph Street, and Fruitland Avenue. Vernon sits next door — city limits still decide the permit office.
House remodel and ADU partitions
New interior steel walls inside an existing Maywood house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Maywood Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Slauson Avenue TI, Atlantic Boulevard shop, Eastern Avenue remodel, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, Slauson Avenue TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Maywood house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete, brick, or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Maywood Streets, ZIP, and Permits
Maywood is an incorporated Gateway City in Los Angeles County — about eight miles southeast of downtown Los Angeles and one of the smallest cities in the county by land area. This page uses street ZIP 90270. 90270 is the only Maywood street ZIP. Area codes are 323, 213, and 738. Nearby Bell uses 90201. Huntington Park uses 90255. Vernon uses 90058. Commerce uses 90040. Cudahy and Bell Gardens also use 90201. Text the street so the bid matches City of Maywood Building Division — not City of Bell Building, not City of Huntington Park Building, not City of Vernon Building, and not City of Commerce Building.
Permits for City of Maywood addresses run through City of Maywood Department of Building and Planning, Building Division, City Hall, 4319 E. Slauson Avenue, Maywood, CA 90270. Building: (323) 562-5700. Inspector / permit tech line: (323) 562-5744. Email: building@cityofmaywood.org. City site is cityofmaywood.com. A lot that only sits next to Maywood but is inside Bell, Vernon, Huntington Park, or Commerce runs through that city’s office — a different counter.
Vernon sits north and west. Bell sits south. Huntington Park sits southwest. Commerce sits east. I-710 is reached on Atlantic Boulevard. Slauson Avenue is the east-west spine through City Hall. The street — not the mailing city on a bill — decides the permit office.
Commercial work sits on Slauson Avenue, Atlantic Boulevard, Eastern Avenue, Maywood Avenue, District Boulevard, Randolph Street, Fruitland Avenue, Fishburn Avenue, and Loma Vista Avenue. House grid work sits on Heliotrope, Mayflower, Pala, Palm, Pine, 52nd through 61st Streets, and the numbered blocks between Slauson and the Bell line. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Slauson Avenue tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Maywood Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Maywood, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Maywood, CA
This page is steel and metal stud framing in Maywood — ZIP 90270, City of Maywood, Los Angeles County — from our Fairfield shop. City Building Division is at 4319 E. Slauson Avenue. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that 90270 covers Bell, Vernon, Huntington Park, or Commerce. No City of Bell permit for a Maywood lot. No City of Vernon permit on this page. No City of Huntington Park permit. No City of Commerce permit. No storefront on Slauson Avenue. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Bell, Vernon, Huntington Park, Commerce, Cudahy, and other addresses that only sit next to Maywood are different places. This page is Maywood, CA, ZIP 90270, City of Maywood — text the street so the permit office matches the address.
Maywood Metal Stud FAQs
Do you do steel / metal stud framing in Maywood?
Yes. Interior light-gauge metal stud framing in Maywood, CA from our Fairfield shop — partitions, Slauson Avenue TIs, Atlantic Boulevard interiors, Eastern Avenue walls, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Maywood a city?
Yes. Maywood incorporated on September 2, 1924. Building permits inside city limits run through City of Maywood Building Division at 4319 E. Slauson Avenue — not Bell, not Vernon, not Huntington Park, and not Commerce.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Maywood houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Slauson Avenue TIs, Atlantic Boulevard shops, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Slauson Avenue or Atlantic Boulevard?
Yes. Occupied retail, restaurant, office, and commercial tenant improvements on Slauson Avenue, Atlantic Boulevard, Eastern Avenue, and Maywood Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Maywood buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. Tight lots and older Slauson Avenue buildings need a clean layout — not a guessed gauge.
Does 90270 cover all of Maywood?
Yes. 90270 is the street ZIP for the City of Maywood. Nearby Bell uses 90201. Huntington Park uses 90255. Vernon uses 90058. Commerce uses 90040. Text the street so the bid matches City of Maywood Building Division.
Do you work Slauson Avenue, Atlantic Boulevard, and Eastern Avenue?
Yes. Slauson Avenue, Atlantic Boulevard, Eastern Avenue, Maywood Avenue, District Boulevard, Randolph Street, Fishburn Avenue, Loma Vista Avenue, and other Maywood 90270 addresses are on this framing page. Text the street with the photos.
What ZIP does this Maywood page cover?
This page covers Maywood 90270 street addresses inside the City of Maywood. Text the street with the photos so the bid matches City Building Division — not Bell 90201, not Huntington Park 90255, and not Vernon 90058.
Who issues the permit in Maywood?
City of Maywood Department of Building and Planning, Building Division, 4319 E. Slauson Avenue, Maywood, CA 90270. Call (323) 562-5700. Inspector line: (323) 562-5744. City of Bell Building is a different office. City of Huntington Park Building is a different office. City of Vernon Building is a different office. City of Commerce Building is a different office.
How much does metal stud framing cost in Maywood?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Maywood 90270 address uses City of Maywood Building Division — not a Bell, Vernon, Huntington Park, or Commerce permit.
Need Maywood Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099