Lynwood, CA 90262 • Incorporated 1921 • Los Angeles County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Lynwood, CA
Light-gauge steel and metal stud framing in Lynwood — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Long Beach Boulevard shops, Imperial Highway build-outs, Atlantic Avenue interiors, and house remodels in 90262.
Lynwood Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — not a Long Beach Boulevard storefront. Lynwood is an incorporated Gateway City in Los Angeles County — not South Gate, not Compton, and not Watts. It has its own Building and Safety Division at City Hall, 11330 Bullis Road. 90262 is the street ZIP for the city. This page is steel / metal stud framing at City of Lynwood 90262 addresses — Long Beach Boulevard, Imperial Highway, Atlantic Avenue, and Bullis Road. The street decides the bid.
Text “Lynwood” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Lynwood
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in Lynwood 90262 addresses. This is the skeleton the board hangs on.
Long Beach Boulevard TIs
Shop, restaurant, office, and commercial build-outs on Long Beach Boulevard when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Imperial Highway and I-105 corridor
Retail, medical, and office partitions on Imperial Highway near I-105, State Street, and Santa Fe Avenue. Occupied buildings change the layout — not the stud spec.
Atlantic Avenue and Bullis Road interiors
Shop, warehouse-office, and tenant walls on Atlantic Avenue, Bullis Road, Alameda Street, and Martin Luther King Jr. Boulevard. Compton sits south — city limits still decide the permit office.
House remodel and ADU partitions
New interior steel walls inside an existing Lynwood house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Lynwood Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Long Beach Boulevard TI, Imperial Highway shop, Atlantic Avenue remodel, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, Long Beach Boulevard TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Lynwood house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete, brick, or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Lynwood Streets, ZIP, and Permits
Lynwood is an incorporated Gateway City in Los Angeles County — less than ten miles south of downtown Los Angeles. This page uses street ZIP 90262. 90262 is the only Lynwood street ZIP. Area codes are 310, 424, and 323. Nearby South Gate uses 90280. Compton uses 90220 / 90221 / 90222. Paramount uses 90723. Downey uses 90241 / 90242. Watts and Willowbrook use 90002 / 90059. Text the street so the bid matches City of Lynwood Building and Safety — not City of South Gate Building, not City of Compton Building and Safety, not City of Paramount Building, and not City of Los Angeles Building and Safety for Watts.
Permits for City of Lynwood addresses run through City of Lynwood Community Development, Building and Safety Division, City Hall, 11330 Bullis Road, Lynwood, CA 90262. Building and Safety: (310) 603-0220. City site is lynwoodca.gov. A lot that only sits next to Lynwood but is inside South Gate, Compton, Paramount, or the City of Los Angeles runs through that city’s office — a different counter.
South Gate sits north. Compton sits south. Downey sits east. Paramount sits southeast. Watts and unincorporated Willowbrook sit west. I-105 (Glenn Anderson Freeway) cuts the city east-west. I-710 sits on the east side. The street — not the mailing city on a bill — decides the permit office.
Commercial work sits on Long Beach Boulevard, Imperial Highway, Atlantic Avenue, Bullis Road, Alameda Street, Martin Luther King Jr. Boulevard, State Street, Santa Fe Avenue, and Century Boulevard. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Long Beach Boulevard tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Lynwood Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Lynwood, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Lynwood, CA
This page is steel and metal stud framing in Lynwood — ZIP 90262, City of Lynwood, Los Angeles County — from our Fairfield shop. City Building and Safety is at 11330 Bullis Road. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that 90262 covers South Gate, Compton, or Watts. No City of South Gate permit for a Lynwood lot. No City of Compton permit on this page. No City of Paramount permit. No City of Los Angeles Building and Safety permit for Watts. No storefront on Long Beach Boulevard. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. South Gate, Compton, Paramount, Downey, Watts, Willowbrook, and other addresses that only sit next to Lynwood are different places. This page is Lynwood, CA, ZIP 90262, City of Lynwood — text the street so the permit office matches the address.
Lynwood Metal Stud FAQs
Do you do steel / metal stud framing in Lynwood?
Yes. Interior light-gauge metal stud framing in Lynwood, CA from our Fairfield shop — partitions, Long Beach Boulevard TIs, Imperial Highway interiors, Atlantic Avenue walls, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Lynwood a city?
Yes. Lynwood incorporated on July 16, 1921. Building permits inside city limits run through City of Lynwood Building and Safety at 11330 Bullis Road — not South Gate, not Compton, and not City of Los Angeles Building and Safety for Watts.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Lynwood houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Long Beach Boulevard TIs, Imperial Highway shops, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Long Beach Boulevard or Imperial Highway?
Yes. Occupied retail, restaurant, office, and commercial tenant improvements on Long Beach Boulevard, Imperial Highway, Atlantic Avenue, and Bullis Road are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Lynwood buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. Tight lots and older Long Beach Boulevard buildings need a clean layout — not a guessed gauge.
Does 90262 cover all of Lynwood?
Yes. 90262 is the street ZIP for the City of Lynwood. Nearby South Gate uses 90280. Compton uses 90220. Paramount uses 90723. Watts uses 90002 / 90059. Text the street so the bid matches City of Lynwood Building and Safety.
Do you work Long Beach Boulevard, Imperial Highway, and Atlantic?
Yes. Long Beach Boulevard, Imperial Highway, Atlantic Avenue, Bullis Road, Alameda Street, Martin Luther King Jr. Boulevard, State Street, Santa Fe Avenue, and other Lynwood 90262 addresses are on this framing page. Text the street with the photos.
What ZIP does this Lynwood page cover?
This page covers Lynwood 90262 street addresses inside the City of Lynwood. Text the street with the photos so the bid matches City Building and Safety — not South Gate 90280, not Compton 90220, and not Watts 90059.
Who issues the permit in Lynwood?
City of Lynwood Community Development, Building and Safety Division, 11330 Bullis Road, Lynwood, CA 90262. Call (310) 603-0220. City of South Gate Building is a different office. City of Compton Building and Safety is a different office. City of Los Angeles Building and Safety is a different office for Watts.
How much does metal stud framing cost in Lynwood?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Lynwood 90262 address uses City of Lynwood Building and Safety — not a South Gate, Compton, Paramount, or Los Angeles City permit.
Need Lynwood Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099