Los Alamitos, CA 90720 • Northwest Orange County • Incorporated City • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Los Alamitos, CA
Light-gauge steel and metal stud framing in Los Alamitos — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Town Center shops on Los Alamitos Boulevard and Katella, Cerritos Avenue suites, and house remodels. A Los Alamitos mailing label and a Rossmoor or Cypress job are not the same city hall.
Los Alamitos Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Los Alamitos storefront. This page is steel / metal stud framing in Los Alamitos, CA 90720 — Los Alamitos Boulevard, Katella Avenue, Cerritos Avenue, Lampson Avenue, Ball Road, Orangewood Avenue, and Lexington Drive.
Text “Los Alamitos” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Los Alamitos
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 90720. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, and office build-outs on Los Alamitos Boulevard, Katella Avenue, and Cerritos Avenue. If the drawing says steel studs, that is the bid. Commercial framing →
Town Center interiors
Shop partitions, restaurant walls, and rated assemblies around Katella and Los Alamitos Boulevard, Old Town, and the commercial blocks near City Hall.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Los Alamitos house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Los Alamitos Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Town Center TI, Los Alamitos Boulevard shops, Katella offices, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or building structure that hold the roof up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls in Old Town, College Park, Greenbrook, and the tracts off Lampson and Orangewood with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Town Center vs Rossmoor vs the Race Course
Los Alamitos is a small incorporated northwest Orange County city — ZIP 90720, with 90721 as a P.O. box. Seal Beach sits south. Cypress sits east. Garden Grove sits farther east. Long Beach sits west in Los Angeles County. Rossmoor sits against the south edge and is unincorporated — the City of Los Alamitos does not issue Rossmoor permits. Those go through Orange County Building. The Race Course uses a 90720 mailing address and sits in Cypress. Joint Forces Training Base occupies a large slice of the city. Sharing Los Alamitos Unified does not share a building department. Text the street so we bid the right desk.
Los Alamitos Boulevard and Katella Avenue cross at Town Center and City Hall at 3191 Katella. Cerritos Avenue, Lampson Avenue, Ball Road, Orangewood Avenue, and Lexington Drive pick up more commercial and house streets. Old Town East and West sit on the boulevard grid. Carrier Row and the later tracts fill the rest of the small city. Tight Town Center lots change parking — not the stud spec.
The usual mismatch is treating a Town Center tenant wall like a bedroom 2×4 — or hanging a Level 5 restaurant finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Los Alamitos Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Los Alamitos, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Town Center shop, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Los Alamitos, CA
This page is steel and metal stud framing in Los Alamitos — ZIP 90720, an incorporated northwest Orange County city, from our Fairfield shop. Permits inside city limits run through the City of Los Alamitos, not Rossmoor, Cypress, Seal Beach, or Long Beach. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Los Alamitos address. No structural steel building. No Joint Forces Training Base contract. No promise that metal studs hold a house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Los Alamitos — not Rossmoor, Cypress, Seal Beach, Garden Grove, or Long Beach.
Los Alamitos Metal Stud FAQs
Do you do steel / metal stud framing in Los Alamitos?
Yes. Interior light-gauge metal stud framing in Los Alamitos, CA 90720 from our Fairfield shop — partitions, Town Center TI walls, Los Alamitos Boulevard interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Rossmoor part of Los Alamitos?
No. Rossmoor is unincorporated Orange County. The City of Los Alamitos does not issue Rossmoor permits — those go through the County. Cypress, Seal Beach, Garden Grove, and Long Beach are also separate desks. Sharing a school district does not share a city hall.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and building structure that hold the roof up are a different contractor.
Do Los Alamitos houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Town Center TIs, shop interiors, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Los Alamitos Boulevard or Katella?
Yes. Occupied retail and restaurant TIs on Los Alamitos Boulevard, Katella Avenue, and Cerritos Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Los Alamitos buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Town Center shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Los Alamitos Blvd, Katella, Cerritos, and Lampson?
Yes. Los Alamitos Boulevard, Katella Avenue, Cerritos Avenue, Lampson Avenue, Ball Road, Orangewood Avenue, and Lexington Drive are on the same framing page. Text the street with the photos.
Who issues the permit in Los Alamitos?
The City of Los Alamitos Building and Safety Division at 3191 Katella Avenue. Rossmoor uses Orange County Building. Cypress, Seal Beach, and Long Beach are different desks — that is why the street matters. A 90720 mailing address can still sit in Cypress.
How much does metal stud framing cost in Los Alamitos?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, parking, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Los Alamitos Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099