La Verne, CA 91750 • Incorporated 1906 • Los Angeles County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in La Verne, CA
Light-gauge steel and metal stud framing in La Verne — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: D Street shops, Foothill Boulevard build-outs, Bonita Avenue interiors, and house remodels in 91750.
La Verne Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — not a D Street storefront. La Verne is an incorporated San Gabriel Valley city in Los Angeles County — not Pomona, not San Dimas, and not Claremont. It has its own Building and Safety Division at City Hall, 3660 D Street. 91750 is the street ZIP. This page is steel / metal stud framing at City of La Verne 91750 addresses — D Street, Foothill Boulevard, and Bonita Avenue. The street decides the bid.
Text “La Verne” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in La Verne
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in La Verne 91750 addresses. This is the skeleton the board hangs on.
D Street and Old Town TIs
Shop, restaurant, office, and commercial build-outs on D Street and Old Town La Verne when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Foothill Boulevard and Bonita Avenue interiors
Retail, medical, and office partitions on Foothill Boulevard (historic Route 66), Bonita Avenue, and Arrow Highway. Occupied buildings change the layout — not the stud spec.
University and Baseline edges
Campus-area, shop, and tenant walls near the University of La Verne, Baseline Road, Wheeler Avenue, and White Avenue when the lot is City of La Verne. Pomona and Claremont sit next door — city limits still decide the permit office.
House remodel and ADU partitions
New interior steel walls inside an existing La Verne house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a La Verne Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | D Street TI, Foothill Boulevard shop, Bonita Avenue remodel, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, Old Town TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most La Verne house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete, brick, or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
La Verne Streets, ZIP, and Permits
La Verne is an incorporated San Gabriel Valley city in Los Angeles County — at the foot of the San Gabriel Mountains, about 30 miles east of downtown Los Angeles. This page uses street ZIP 91750. 91750 is the only La Verne street ZIP. Area codes are 909, 626, and 840. Nearby San Dimas uses 91773. Claremont uses 91711. Pomona uses 91766 / 91767 / 91768. Text the street so the bid matches City of La Verne Building and Safety — not City of Pomona Building, not City of San Dimas Building and Safety, and not City of Claremont Building.
Permits for City of La Verne addresses run through City of La Verne Community Development, Building and Safety Division, City Hall, 3660 D Street, La Verne, CA 91750. Building and Safety: (909) 596-8706. Email: building@cityoflaverne.org. City sites are cityoflaverne.org and laverneca.gov. Unincorporated foothill parcels still use Los Angeles County Building and Safety — not this counter.
San Dimas sits west. Claremont sits east. Pomona sits south. Glendora sits northwest. I-210 cuts the city east-west. Foothill Boulevard is the historic Route 66 spine. D Street holds City Hall and Old Town. Bonita Avenue, Arrow Highway, Baseline Road, Wheeler Avenue, and White Avenue fill the grid. The street — not the mailing city on a bill — decides the permit office.
Commercial work sits on D Street, Foothill Boulevard, Bonita Avenue, Arrow Highway, Baseline Road, and near the University of La Verne. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a D Street tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a La Verne Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 La Verne, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
La Verne, CA
This page is steel and metal stud framing in La Verne — ZIP 91750, City of La Verne, Los Angeles County — from our Fairfield shop. City Building and Safety is at 3660 D Street. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that 91750 covers San Dimas or Claremont. No City of Pomona permit for a La Verne lot. No City of San Dimas permit. No City of Claremont permit. No Los Angeles County Building and Safety permit for a City of La Verne address. No storefront on D Street. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Pomona, San Dimas, Claremont, Glendora, and other addresses that only sit next to La Verne are different places. This page is La Verne, CA, ZIP 91750, City of La Verne — text the street so the permit office matches the address.
La Verne Metal Stud FAQs
Do you do steel / metal stud framing in La Verne?
Yes. Interior light-gauge metal stud framing in La Verne, CA from our Fairfield shop — partitions, D Street and Old Town TIs, Foothill Boulevard and Bonita Avenue interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is La Verne a city?
Yes. La Verne incorporated in 1906 (as Lordsburg; the name changed to La Verne in 1917). Building permits inside city limits run through City of La Verne Building and Safety at 3660 D Street — not Pomona, not San Dimas, and not Claremont.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do La Verne houses use metal studs or wood?
Most house walls here are still wood. Metal wins on D Street TIs, Foothill Boulevard shops, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on D Street, Foothill, or Bonita?
Yes. Occupied retail, restaurant, office, and commercial tenant improvements on D Street, Foothill Boulevard, Bonita Avenue, and Arrow Highway are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied La Verne buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. Tight Old Town lots and older D Street buildings need a clean layout — not a guessed gauge.
Does 91750 cover only the City of La Verne?
91750 is the street ZIP for La Verne. Nearby San Dimas uses 91773. Claremont uses 91711. Pomona uses 91766 / 91767 / 91768. Text the street so the bid matches City of La Verne Building and Safety.
Do you work D Street, Foothill Boulevard, and Bonita?
Yes. D Street, Foothill Boulevard, Bonita Avenue, Arrow Highway, Baseline Road, Wheeler Avenue, White Avenue, and other La Verne 91750 addresses are on this framing page. Text the street with the photos.
What ZIP does this La Verne page cover?
This page covers La Verne 91750 street addresses inside the City of La Verne. Text the street with the photos so the bid matches City Building and Safety — not San Dimas 91773, not Claremont 91711, and not Pomona 91766.
Who issues the permit in La Verne?
City of La Verne Community Development, Building and Safety Division, 3660 D Street, La Verne, CA 91750. Call (909) 596-8706. City of Pomona Building is a different office. City of San Dimas Building and Safety is a different office. City of Claremont Building is a different office. Los Angeles County Building and Safety is a different office for unincorporated parcels.
How much does metal stud framing cost in La Verne?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of La Verne 91750 address uses City of La Verne Building and Safety — not a Pomona, San Dimas, Claremont, or Los Angeles County permit.
Need La Verne Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099