La Quinta, CA 92253 • Coachella Valley • Incorporated 1982 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in La Quinta, CA
Light-gauge steel and metal stud framing in La Quinta — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Old Town shops, Highway 111 suites, Washington Street interiors, and house remodels. La Quinta is Riverside County. Palm Desert and Indio are different city halls.
La Quinta Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a La Quinta storefront. This page is steel / metal stud framing in La Quinta, CA — Old Town, Highway 111, Washington Street, Jefferson Street, Avenue 48, and PGA West interiors inside city limits.
Text “La Quinta” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. Gated streets need access. The street still decides which desk reviews the wall.
Metal Stud Work We Do in La Quinta
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 92253. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, medical, hotel, and office build-outs on Highway 111, Washington Street, and Old Town. If the drawing says steel studs, that is the bid. Commercial framing →
Old Town, 111, and club interiors
Shop partitions, restaurant walls, and rated assemblies in Old Town La Quinta, Highway 111 corridors, Washington Street suites, and clubhouse / resort interiors inside city limits.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing La Quinta house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a La Quinta Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Old Town TI, Highway 111 shops, Washington Street interiors, resort and medical suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, hotel corridors, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls in La Quinta Cove, PGA West, Rancho La Quinta, and the tracts off Washington, Jefferson, and Madison with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Old Town vs Highway 111 vs the City Line
La Quinta is an incorporated Coachella Valley city in Riverside County — May 1, 1982 — with standard ZIP 92253 and P.O. boxes 92247 and 92248. It uses the 760 / 442 overlay. Palm Desert and Indian Wells sit west. Indio sits north and east. Bermuda Dunes is unincorporated. Coachella sits farther east. Permits inside city limits run through the City of La Quinta Building Division at 78-495 Calle Tampico, 92253. Sharing Highway 111 does not share a city hall.
This page is the city of La Quinta, not the hotel brand and not La Puente in Los Angeles County. Old Town La Quinta, La Quinta Cove, PGA West, and Rancho La Quinta are neighborhoods here when the address is inside city limits. A Washington Street suite can already be Indio or Indian Wells. Text the street so we bid the right desk.
Highway 111, Washington Street, Jefferson Street, Madison Street, Avenue 48, Avenue 50, and Calle Tampico carry the shops and through traffic. I-10 sits north of town. Occupied shops, gated club interiors, seasonal houses, and Old Town restaurants change the layout — not the stud spec. Gated communities need gate codes or an escort before we roll.
The usual mismatch is treating an Old Town or Highway 111 tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house or a clubhouse up. Occupied houses, open Old Town shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a La Quinta Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 La Quinta, the street, gate notes, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Old Town shop, Highway 111 suite, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
La Quinta, CA
This page is steel and metal stud framing in La Quinta — ZIP 92253, an incorporated Coachella Valley city in Riverside County, from our Fairfield shop. Permits inside city limits run through the City of La Quinta, not Palm Desert, Indian Wells, Indio, or Bermuda Dunes. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake La Quinta address. No structural steel building. No promise that metal studs hold a house or a clubhouse up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is the City of La Quinta — not Palm Desert, Indian Wells, Indio, Bermuda Dunes, La Puente, or a hotel brand.
La Quinta Metal Stud FAQs
Do you do steel / metal stud framing in La Quinta?
Yes. Interior light-gauge metal stud framing in La Quinta, CA from our Fairfield shop — partitions, Old Town and Highway 111 TIs, Washington Street interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is La Quinta the same as Palm Desert or Indio?
No. They are three Coachella Valley cities. Highway 111 and Washington Street cross more than one city hall. They do not share a building department.
Is this the hotel or La Puente?
This page is the City of La Quinta in Riverside County. It is not the hotel brand and not La Puente in Los Angeles County.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do La Quinta houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Old Town, Highway 111, and Washington Street TIs, shop and resort interiors, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop in Old Town or on Highway 111?
Yes. Occupied retail and restaurant TIs in Old Town La Quinta and on Highway 111, Washington Street, and Jefferson Street are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied or gated La Quinta buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Old Town shop, a seasonal interior, or an after-hours office. Gated streets need a code or an escort. A full TI is still a construction job — plan rooms.
Do you work the Cove, PGA West, and Old Town?
Yes. Old Town, La Quinta Cove, PGA West, Rancho La Quinta, and other addresses inside city limits are on the same framing page. Text the street and gate notes with the photos.
Who issues the permit in La Quinta?
The City of La Quinta Building Division at 78-495 Calle Tampico, CA 92253. Palm Desert, Indian Wells, Indio, and Bermuda Dunes are different desks — that is why the street matters.
How much does metal stud framing cost in La Quinta?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need La Quinta Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099