La Puente, CA 91744–91746 • Incorporated 1956 • Los Angeles County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in La Puente, CA
Light-gauge steel and metal stud framing in La Puente — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Main Street shops, Hacienda Boulevard build-outs, Valley Boulevard interiors, and house remodels on City of La Puente lots.
La Puente Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield — not a Main Street storefront. La Puente is an incorporated San Gabriel Valley city in Los Angeles County — not Industry, not West Covina, and not Hacienda Heights. It has its own Building and Safety Division at City Hall, 15900 E. Main Street. Street ZIPs include 91744 and 91746. Those same ZIPs also mail to Valinda, Bassett, and West Puente Valley. This page is steel / metal stud framing at City of La Puente addresses — Main Street, Hacienda Boulevard, and Valley Boulevard. The street decides the bid.
Text “La Puente” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in La Puente
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls on City of La Puente addresses. This is the skeleton the board hangs on.
Main Street and downtown TIs
Shop, restaurant, office, and commercial build-outs on Main Street and downtown La Puente when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Hacienda Boulevard and Valley Boulevard interiors
Retail, medical, and office partitions on Hacienda Boulevard, Valley Boulevard, and Amar Road. Occupied buildings change the layout — not the stud spec.
Temple, Glendora, and Azusa edges
Shop and tenant walls on Temple Avenue, Glendora Avenue, Azusa Avenue, Puente Avenue, and Nelson Avenue when the lot is City of La Puente. Industry and Hacienda Heights sit next door — city limits still decide the permit office.
House remodel and ADU partitions
New interior steel walls inside an existing La Puente house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a La Puente Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Main Street TI, Hacienda Boulevard shop, Valley Boulevard remodel, rated walls, or a finish that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, downtown TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most La Puente house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete, brick, or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
La Puente Streets, ZIP, and Permits
La Puente is an incorporated San Gabriel Valley city in Los Angeles County. Street ZIPs include 91744 and 91746. 91747 and 91749 are PO Boxes. Area code is 626. 91744 and 91746 also mail to Valinda, Bassett, and West Puente Valley — unincorporated communities that use Los Angeles County Building and Safety. Nearby Industry uses 91744 / 91745 / 91746 / 91748 / 91789. West Covina uses 91790–91793. Hacienda Heights uses 91745. Text the street so the bid matches City of La Puente Building and Safety — not City of Industry Building and Safety, not City of West Covina Building, and not the County La Puente office on Central Avenue.
Permits for City of La Puente addresses run through City of La Puente Development Services, Building and Safety Division, City Hall, 15900 E. Main Street, La Puente, CA 91744. Building and Safety / inspection request line: (626) 855-1542. City Hall main: (626) 855-1500. City site is lapuente.org. Los Angeles County Public Works also keeps a Building and Safety office at 16005 E. Central Avenue in La Puente. That County counter is for unincorporated parcels and contract cities — not a City of La Puente lot.
City of Industry wraps much of the south and east. West Covina sits north. Hacienda Heights, Valinda, and West Puente Valley sit on the edges as unincorporated county. SR-60 (Pomona Freeway) and I-10 sit nearby. Hacienda Boulevard is the main commercial spine. Valley Boulevard, Main Street, Amar Road, Temple Avenue, and Glendora Avenue fill the grid. The street — not the mailing city on a bill — decides the permit office.
Commercial work sits on Main Street, Hacienda Boulevard, Valley Boulevard, Amar Road, Temple Avenue, Glendora Avenue, Azusa Avenue, and Puente Avenue. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Hacienda Boulevard tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a La Puente Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 La Puente, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
La Puente, CA
This page is steel and metal stud framing in La Puente — City of La Puente, Los Angeles County — from our Fairfield shop. City Building and Safety is at 15900 E. Main Street. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that 91744 covers only the City of La Puente. No City of Industry permit for a La Puente lot. No City of West Covina permit. No Hacienda Heights / Los Angeles County permit for a City of La Puente address. No County La Puente Building and Safety counter at 16005 E. Central Avenue for a city lot. No storefront on Main Street. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Industry, West Covina, Hacienda Heights, Valinda, Bassett, and West Puente Valley are different places. This page is La Puente, CA, City of La Puente — text the street so the permit office matches the address.
La Puente Metal Stud FAQs
Do you do steel / metal stud framing in La Puente?
Yes. Interior light-gauge metal stud framing in La Puente, CA from our Fairfield shop — partitions, Main Street TIs, Hacienda Boulevard and Valley Boulevard interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is La Puente a city?
Yes. La Puente incorporated on August 1, 1956. Building permits inside city limits run through City of La Puente Building and Safety at 15900 E. Main Street — not Industry, not West Covina, and not the County office on Central Avenue.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do La Puente houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Main Street TIs, Hacienda Boulevard shops, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Main Street, Hacienda, or Valley?
Yes. Occupied retail, restaurant, office, and commercial tenant improvements on Main Street, Hacienda Boulevard, Valley Boulevard, and Amar Road are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied La Puente buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. Tight downtown lots and older Main Street buildings need a clean layout — not a guessed gauge.
Does 91744 cover only the City of La Puente?
No. 91744 and 91746 mail to the City of La Puente and also to Valinda, Bassett, and West Puente Valley. Nearby Hacienda Heights uses 91745. Industry uses several 917xx ZIPs. Text the street so the bid matches City of La Puente Building and Safety — not the County counter on Central Avenue.
Do you work Main Street, Hacienda Boulevard, and Valley Boulevard?
Yes. Main Street, Hacienda Boulevard, Valley Boulevard, Amar Road, Temple Avenue, Glendora Avenue, Azusa Avenue, Puente Avenue, Nelson Avenue, and other City of La Puente addresses are on this framing page. Text the street with the photos.
What ZIP does this La Puente page cover?
This page covers City of La Puente street addresses in 91744 and 91746. Text the street with the photos so the bid matches City Building and Safety — not Industry, not Hacienda Heights 91745, and not Valinda or West Puente Valley county lots.
Who issues the permit in La Puente?
City of La Puente Development Services, Building and Safety Division, 15900 E. Main Street, La Puente, CA 91744. Call (626) 855-1542. City of Industry Building and Safety is a different office. City of West Covina Building is a different office. Los Angeles County Building and Safety at 16005 E. Central Avenue is a different office for unincorporated parcels.
How much does metal stud framing cost in La Puente?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of La Puente address uses City of La Puente Building and Safety — not an Industry, West Covina, or Los Angeles County permit.
Need La Puente Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099