La Habra, CA 90631 • North Orange County • Incorporated 1925 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in La Habra, CA
Light-gauge steel and metal stud framing in La Habra — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Whittier Boulevard shops, Imperial Highway interiors, Harbor Boulevard suites, and house remodels. La Habra is Orange County. La Habra Heights is Los Angeles County.
La Habra Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a La Habra storefront. This page is steel / metal stud framing in La Habra, CA 90631 — Whittier Boulevard, Imperial Highway, Beach Boulevard, Harbor Boulevard, and La Habra Boulevard.
Text “La Habra” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street still decides which county desk reviews the wall.
Metal Stud Work We Do in La Habra
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 90631. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, and office build-outs on Whittier Boulevard, Imperial Highway, Harbor Boulevard, and Beach Boulevard. If the drawing says steel studs, that is the bid. Commercial framing →
Corridor and plaza interiors
Shop partitions, medical-office walls, and rated assemblies on Imperial Highway, Harbor Boulevard, and downtown La Habra Boulevard.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing La Habra house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a La Habra Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Whittier Boulevard TI, Imperial Highway shops, Harbor Boulevard interiors, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or hillside structure that hold the house up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls in Heritage Village, Westridge, North Hills, and the tracts off Idaho and Euclid with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Whittier Blvd vs the Heights vs the County Line
La Habra is an incorporated North Orange County city — ZIP 90631, with 90632 and 90633 as P.O. boxes. It sits in the northwest corner of Orange County and uses a 562 area code. La Habra Heights is a separate incorporated city in Los Angeles County. Whittier and La Mirada sit west in Los Angeles County. Brea and Fullerton sit east and south in Orange County. Permits inside La Habra city limits run through the City of La Habra Building & Safety at 110 E. La Habra Boulevard. The Heights desk is 1245 N. Hacienda Road. Sharing a first name and a 90631 mailing label does not share a city hall. Text the street so we bid the right county.
Whittier Boulevard, Imperial Highway, Beach Boulevard, Harbor Boulevard, and La Habra Boulevard carry the shops. Idaho Street, Euclid Street, and Lambert Road pick up more house streets. Westridge, Heritage Village, and North Hills sit off those arterials. There is no freeway through town. Occupied shops and hillside houses change the layout — not the stud spec.
The usual mismatch is treating an Imperial Highway tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a hillside house up. Occupied houses, open shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a La Habra Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 La Habra, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Whittier shop, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
La Habra, CA
This page is steel and metal stud framing in La Habra — ZIP 90631, an incorporated North Orange County city, from our Fairfield shop. Permits inside city limits run through the City of La Habra, not La Habra Heights, Whittier, Fullerton, or Brea. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake La Habra address. No structural steel building. No promise that metal studs hold a hillside house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is La Habra — not La Habra Heights, Whittier, La Mirada, Fullerton, or Brea.
La Habra Metal Stud FAQs
Do you do steel / metal stud framing in La Habra?
Yes. Interior light-gauge metal stud framing in La Habra, CA 90631 from our Fairfield shop — partitions, Whittier Boulevard TIs, Imperial Highway interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is La Habra the same as La Habra Heights?
No. La Habra is an Orange County city. La Habra Heights is a Los Angeles County city. They share a first name and often a 90631 mailing label. They do not share a building department.
Is La Habra in Los Angeles County?
No. La Habra is in Orange County. The 562 area code and the Whittier / Heights border make people guess L.A. The permit desk is still City of La Habra.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and hillside structure that hold the house up are a different contractor.
Do La Habra houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Whittier and Imperial TIs, shop interiors, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Whittier, Imperial, or Harbor?
Yes. Occupied retail and restaurant TIs on Whittier Boulevard, Imperial Highway, Harbor Boulevard, and Beach Boulevard are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied La Habra buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Whittier shop, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Whittier, Imperial, Beach, and Harbor?
Yes. Whittier Boulevard, Imperial Highway, Beach Boulevard, Harbor Boulevard, La Habra Boulevard, Idaho Street, and Euclid Street are on the same framing page. Text the street with the photos.
Who issues the permit in La Habra?
The City of La Habra Building & Safety at 110 E. La Habra Boulevard. La Habra Heights, Whittier, Fullerton, and Brea are different desks — that is why the street matters.
How much does metal stud framing cost in La Habra?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need La Habra Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099