Selma, CA 93662 • City of Selma, Fresno County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Selma, CA
Light-gauge steel and metal stud framing in Selma — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: High Street downtown build-outs, McCall Avenue shops, Golden State Boulevard interiors, and house remodels in 93662.
Selma Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a High Street storefront. Selma is an incorporated city in southeast Fresno County at Highway 99 and Highway 43. It is not Fowler, not Kingsburg, and it is not Sanger. This page is steel / metal stud framing at City of Selma addresses — with 93662 as the ZIP on this page — High Street, Tucker Street, McCall Avenue, Whitson Street, Golden State Boulevard, Second Street, and Floral Avenue. A county-road Selma mailbox can still be Fresno County Building. The street decides the bid.
Text “Selma” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Selma
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 93662 Selma addresses. This is the skeleton the board hangs on.
High Street and Golden State TIs
Shop, restaurant, office, and downtown build-outs on High Street and Golden State Boulevard when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
McCall Avenue and Whitson Street interiors
Shop partitions and house walls on McCall Avenue, Whitson Street, Floral Avenue, Highland Avenue, and Second Street. Highway 99 splits the city — the city line still decides the permit office.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Selma house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Selma Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | High Street TI, Golden State Boulevard shop, McCall Avenue commercial wall, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, Highway 99 corridor interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Selma house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Selma Streets, ZIP, and Permits
Selma is an incorporated city in Fresno County at Highway 99 and Highway 43. This page uses ZIP 93662. Area code is 559. 93662 is larger than the city limits and also covers unincorporated Selma-area roads, including Conejo mailing addresses. Text the street so the bid matches City of Selma — not City of Fowler Building at 128 S. 5th Street, not City of Kingsburg Building, not City of Parlier Community Development at 1100 E. Parlier Avenue, not City of Sanger Building at 1700 7th Street, and not Fresno County Building and Safety at 2220 Tulare Street in Fresno.
Permits for City of Selma addresses run through the City of Selma Community Development Department, Building Division, 1710 Tucker Street, Selma, CA 93662. Call (559) 891-2208 for the Building counter. Inspection requests: (559) 891-2220. Apply and schedule through the City of Selma OpenGov portal. Downtown civic buildings sit around Tucker Street and High Street. City of Fowler Building is a different office. City of Kingsburg Building is a different office. City of Parlier Community Development is a different office. City of Sanger Building is a different office. Fresno County Building and Safety at 2220 Tulare Street is a different office.
Fowler sits northwest. Kingsburg sits southeast. Parlier sits northeast. Sanger sits north. Text the street so the bid matches City of Selma — not a Fowler 5th Street counter, not a Kingsburg desk, not Parlier Avenue, and not a county-road address that only uses a Selma mailing ZIP.
Downtown Selma sits on High Street, Tucker Street, Whitson Street, Second Street, Front Street, and Mill Street. McCall Avenue is the main north-south arterial. Golden State Boulevard runs parallel to Highway 99. Floral Avenue, Highland Avenue, Manning Avenue, and Mountain View Avenue are the main approaches. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a High Street tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Selma Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Selma, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Selma, CA
This page is steel and metal stud framing in Selma — 93662 ZIP, City of Selma, Fresno County — from our Fairfield shop. Community Development / Building Division is at 1710 Tucker Street. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Selma is Fowler, Kingsburg, or Sanger. No Fowler or Kingsburg desk for a City of Selma street address. No storefront on High Street. No structural steel building. No promise that metal studs hold the building up. No claim that every 93662 address is inside city limits. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Fowler, Kingsburg, Parlier, Sanger, and Fresno County are different places. This page is Selma, CA, ZIP 93662, City of Selma, Fresno County — text the street so the permit office matches the address.
Selma Metal Stud FAQs
Do you do steel / metal stud framing in Selma?
Yes. Interior light-gauge metal stud framing in Selma, CA from our Fairfield shop — partitions, High Street and Golden State Boulevard TIs, McCall Avenue interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Selma the same as Fowler or Kingsburg?
No. Selma is its own incorporated city in Fresno County at Highway 99 and Highway 43. Fowler sits northwest. Kingsburg sits southeast. Building permits for this page run through the City of Selma Building Division at 1710 Tucker Street — not City of Fowler and not City of Kingsburg.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Selma houses use metal studs or wood?
Most house walls here are still wood. Metal wins on High Street TIs, Golden State Boulevard shops, McCall Avenue commercial partitions, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on High Street or Golden State Boulevard?
Yes. Occupied retail, restaurant, office, and downtown tenant improvements on High Street, Golden State Boulevard, McCall Avenue, and Whitson Street are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Selma buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. A full TI is still a construction job — plan rooms.
Does 93662 only cover the City of Selma?
93662 is the Selma ZIP. It also covers unincorporated roads outside city limits, including Conejo mailing addresses. Text the street so the bid matches City of Selma — not Fresno County Building in Fresno.
Do you work High Street, McCall Avenue, and Golden State Boulevard?
Yes. High Street, Tucker Street, Whitson Street, Second Street, Front Street, Mill Street, McCall Avenue, Golden State Boulevard, Floral Avenue, Highland Avenue, Manning Avenue, Mountain View Avenue, and other City of Selma addresses are on this framing page. Text the street with the photos.
What ZIP does this Selma page cover?
This page covers 93662, the Selma ZIP. Text the street with the photos so the bid matches City of Selma — not Fowler 93625, not Kingsburg 93631, not Parlier 93648, and not Sanger 93657.
Who issues the permit in Selma?
City of Selma Building Division, 1710 Tucker Street, Selma, CA 93662. Call (559) 891-2208 for Building. Inspections: (559) 891-2220. City of Fowler Building is a different office. City of Kingsburg Building is a different office. City of Parlier Community Development is a different office. City of Sanger Building is a different office. Fresno County Building and Safety at 2220 Tulare Street is a different office.
How much does metal stud framing cost in Selma?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Selma address uses the City of Selma Building Division — not a Fowler, Kingsburg, Parlier, Sanger, or Fresno County unincorporated permit.
Need Selma Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099