Reedley, CA 93654 • City of Reedley, Fresno County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Reedley, CA
Light-gauge steel and metal stud framing in Reedley — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: G Street shops, 9th Street downtown build-outs, Manning Avenue interiors, and house remodels in 93654.
Reedley Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a G Street storefront. Reedley is an incorporated city in southeast Fresno County on the Kings River. It is not Dinuba, not Parlier, and it is not Sanger. This page is steel / metal stud framing at City of Reedley addresses — with 93654 as the ZIP on this page — G Street, I Street, 9th Street, 11th Street, Manning Avenue, and Reed Avenue. A county-road Reedley mailbox can still be Fresno County Building. The street decides the bid.
Text “Reedley” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Reedley
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 93654 Reedley addresses. This is the skeleton the board hangs on.
G Street and 9th Street TIs
Shop, restaurant, office, and downtown build-outs on G Street and 9th Street when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Manning Avenue and Reed Avenue interiors
Shop partitions and house walls on Manning Avenue, Reed Avenue, I Street, 11th Street, and F Street. Manning Avenue is the main east-west approach to Highway 99 — the city line still decides the permit office.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Reedley house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Reedley Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | G Street TI, downtown 9th Street shop, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Reedley house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Reedley Streets, ZIP, and Permits
Reedley is an incorporated city in southeast Fresno County. This page uses ZIP 93654. Area code is 559. 93654 is larger than the city limits and also covers unincorporated Reedley-area roads. Text the street so the bid matches City of Reedley — not City of Dinuba Building in Tulare County, not City of Parlier Community Development, not City of Sanger Building at 1700 7th Street, and not Fresno County Building and Safety at 2220 Tulare Street in Fresno.
Permits for City of Reedley addresses run through the City of Reedley Community Development Department, Building Division, 1733 9th Street, Reedley, CA 93654. Call (559) 637-4200, Option 3, then press 2 for Building. Inspection requests: (559) 637-4200 ext. 112. Apply and schedule through the City of Reedley iWorQ Citizen Portal. Downtown civic buildings also sit around G Street and 9th Street. City of Dinuba Building is a different office and a different county. City of Parlier Community Development is a different office. City of Sanger Building is a different office. Fresno County Building and Safety at 2220 Tulare Street is a different office.
Parlier sits west. Dinuba sits south in Tulare County. Sanger sits northwest. Text the street so the bid matches City of Reedley — not a Dinuba Kamm Avenue desk, not Parlier Avenue, and not a county-road address that only uses a Reedley mailing ZIP.
Downtown Reedley sits on G Street, I Street, F Street, 9th Street, 11th Street, and 13th Street. Manning Avenue and Reed Avenue are the main approaches. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a G Street tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Reedley Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Reedley, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Reedley, CA
This page is steel and metal stud framing in Reedley — 93654 ZIP, City of Reedley, Fresno County — from our Fairfield shop. Community Development is at 1733 9th Street. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Reedley is Dinuba, Parlier, or Sanger. No Dinuba or Sanger desk for a City of Reedley street address. No storefront on G Street. No structural steel building. No promise that metal studs hold the building up. No claim that every 93654 address is inside city limits. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Dinuba, Parlier, Sanger, and Fresno County are different places. This page is Reedley, CA, ZIP 93654, City of Reedley, Fresno County — text the street so the permit office matches the address.
Reedley Metal Stud FAQs
Do you do steel / metal stud framing in Reedley?
Yes. Interior light-gauge metal stud framing in Reedley, CA from our Fairfield shop — partitions, G Street and 9th Street TIs, Manning Avenue interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Reedley the same as Dinuba or Parlier?
No. Reedley is its own incorporated city in southeast Fresno County. Parlier sits west. Dinuba sits south in Tulare County. Building permits for this page run through the City of Reedley Building Division at 1733 9th Street — not City of Dinuba and not City of Parlier.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Reedley houses use metal studs or wood?
Most house walls here are still wood. Metal wins on G Street TIs, downtown 9th Street shops, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on G Street?
Yes. Occupied retail, restaurant, office, and downtown tenant improvements on G Street and 9th Street are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Reedley buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. A full TI is still a construction job — plan rooms.
Does 93654 only cover the City of Reedley?
93654 is the Reedley ZIP. It also covers unincorporated roads outside city limits. Text the street so the bid matches City of Reedley — not Fresno County Building in Fresno.
Do you work G Street, 9th Street, and Manning Avenue?
Yes. G Street, I Street, F Street, 9th Street, 11th Street, 13th Street, Manning Avenue, Reed Avenue, and other City of Reedley addresses are on this framing page. Text the street with the photos.
What ZIP does this Reedley page cover?
This page covers 93654, the Reedley ZIP. Text the street with the photos so the bid matches City of Reedley — not Dinuba 93618 and not Parlier 93648.
Who issues the permit in Reedley?
City of Reedley Building Division, 1733 9th Street, Reedley, CA 93654. Call (559) 637-4200, Option 3, then press 2 for Building. Inspections: (559) 637-4200 ext. 112. City of Dinuba Building is a different office. City of Parlier Community Development is a different office. Fresno County Building and Safety at 2220 Tulare Street is a different office.
How much does metal stud framing cost in Reedley?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Reedley address uses the City of Reedley Building Division — not a Dinuba, Parlier, Sanger, or Fresno County unincorporated permit.
Need Reedley Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099