Penngrove, CA 94951 • Unincorporated Sonoma County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Penngrove, CA
Light-gauge steel and metal stud framing in Penngrove — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Main Street shops, Adobe Road interiors, Old Redwood Highway build-outs, and house remodels in 94951.
Penngrove Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Main Street storefront. Penngrove is an unincorporated community in Sonoma County between Petaluma, Cotati, and Rohnert Park. It is not the City of Petaluma and it is not the City of Rohnert Park. This page is steel / metal stud framing at Penngrove addresses — with 94951 as the ZIP on this page — Main Street, Adobe Road, Old Redwood Highway, and Petaluma Hill Road. It is not Cotati, Petaluma, or Rohnert Park city work.
Text “Penngrove” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Penngrove
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 94951 Penngrove addresses. This is the skeleton the board hangs on.
Main Street and Old Redwood TIs
Shop, restaurant, office, and barn-conversion build-outs on Main Street and Old Redwood Highway when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Adobe Road and Petaluma Hill interiors
Shop partitions and house walls on Adobe Road, Petaluma Hill Road, Minnesota Avenue, Penngrove Avenue, and Lichau Road. Old Redwood Highway continues into Cotati and Petaluma — the city line still decides the permit office.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Penngrove house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Penngrove Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Main Street TI, Old Redwood shop, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Penngrove house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Penngrove Streets, ZIP, and Permits
Penngrove is not an incorporated city. It is an unincorporated community in Sonoma County. This page uses ZIP 94951. Area code is 707. Portions of 94951 also touch Rohnert Park. Text the street so the bid matches unincorporated Penngrove — not City of Rohnert Park Building. Permits for Penngrove / unincorporated Sonoma County addresses run through Permit Sonoma at 2550 Ventura Avenue, Santa Rosa, CA 95403. Call (707) 565-1900. Email: PermitSonoma@sonomacounty.gov. Apply through Permits Online. Inspection scheduling: (707) 565-1900, option 3, or the automated line at (707) 565-3551. City of Petaluma Building is a different office. City of Cotati Building is a different office. City of Rohnert Park Building is a different office.
Petaluma sits south. Cotati sits west. Rohnert Park sits northwest. Old Redwood Highway continues through Cotati and Petaluma. Petaluma Hill Road continues toward Santa Rosa. Text the street so the bid matches unincorporated Penngrove — not Petaluma City Hall, not Cotati, not Rohnert Park.
Main Street is the historic commercial spine, from Old Redwood Highway to Adobe Road. Adobe Road, Old Redwood Highway, Petaluma Hill Road, Minnesota Avenue, Penngrove Avenue, and Lichau Road show up on a lot of plans. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Main Street tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Penngrove Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Penngrove, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Penngrove, CA
This page is steel and metal stud framing in Penngrove — 94951 ZIP, unincorporated Sonoma County — from our Fairfield shop. Permit Sonoma is at 2550 Ventura Avenue in Santa Rosa. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Penngrove is the City of Petaluma, Cotati, or Rohnert Park. No Petaluma City Hall for unincorporated Penngrove addresses. No storefront on Main Street. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Petaluma, Cotati, and Rohnert Park are different places. This page is Penngrove, CA, ZIP 94951, unincorporated Sonoma County — text the street so the permit office matches the address.
Penngrove Metal Stud FAQs
Do you do steel / metal stud framing in Penngrove?
Yes. Interior light-gauge metal stud framing in Penngrove, CA from our Fairfield shop — partitions, Main Street and Old Redwood Highway TIs, Adobe Road interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Penngrove the same as Petaluma, Cotati, or Rohnert Park?
No. Penngrove is unincorporated Sonoma County. Petaluma sits south. Cotati sits west. Rohnert Park sits northwest. Building permits for this page run through Permit Sonoma at 2550 Ventura Avenue — not Petaluma City Hall, not Cotati Building, and not Rohnert Park Building.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Penngrove houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Main Street TIs, Old Redwood shops, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Main Street?
Yes. Occupied retail, restaurant, office, and shop-building tenant improvements on Main Street and Old Redwood Highway are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Penngrove buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. A full TI is still a construction job — plan rooms.
Does 94951 only cover Penngrove?
94951 is the Penngrove ZIP. Portions also touch Rohnert Park. Text the street so the bid matches unincorporated Penngrove — not City of Rohnert Park.
Do you work Main Street, Adobe Road, and Old Redwood Highway?
Yes. Main Street, Adobe Road, Old Redwood Highway, Petaluma Hill Road, Minnesota Avenue, Penngrove Avenue, Lichau Road, and other unincorporated Penngrove addresses are on this framing page. Text the street with the photos.
What ZIP does this Penngrove page cover?
This page covers 94951, the Penngrove ZIP. Text the street with the photos so the bid matches unincorporated Penngrove — not Petaluma 94952 / 94954 and not Cotati 94931.
Who issues the permit in Penngrove?
Permit Sonoma, 2550 Ventura Avenue, Santa Rosa, CA 95403. Call (707) 565-1900. Email PermitSonoma@sonomacounty.gov. Apply through Permits Online. City of Petaluma Building is a different office. City of Cotati Building is a different office. City of Rohnert Park Building is a different office.
How much does metal stud framing cost in Penngrove?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work in unincorporated Penngrove uses Permit Sonoma — not a Petaluma, Cotati, or Rohnert Park city permit.
Need Penngrove Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099