Kingsburg, CA 93631 • City of Kingsburg, Fresno County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Kingsburg, CA
Light-gauge steel and metal stud framing in Kingsburg — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Draper Street downtown build-outs, Sierra Street shops, Golden State Boulevard interiors, and house remodels in 93631.
Kingsburg Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Draper Street storefront. Kingsburg is an incorporated city on the southeast edge of Fresno County at Highway 99, next to Tulare County and Kings County. It is not Selma, not Traver, and it is not Dinuba. This page is steel / metal stud framing at City of Kingsburg addresses — with 93631 as the ZIP on this page — Draper Street, Sierra Street, 18th Avenue, Simpson Street, Golden State Boulevard, 10th Avenue, and Marion Street. A county-road Kingsburg mailbox can still be Fresno County Building — or Tulare County if the street has already left the city. The street decides the bid.
Text “Kingsburg” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Kingsburg
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 93631 Kingsburg addresses. This is the skeleton the board hangs on.
Draper Street and Sierra Street TIs
Shop, restaurant, office, and downtown Swedish Village build-outs on Draper Street and Sierra Street when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Golden State Boulevard and 18th Avenue interiors
Shop partitions and house walls on Golden State Boulevard, 18th Avenue, Simpson Street, 10th Avenue, and 14th Avenue. Highway 99 splits the town — the city line still decides the permit office.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Kingsburg house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Kingsburg Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Draper Street TI, Sierra Street shop, Golden State Boulevard commercial wall, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, Highway 99 corridor interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Kingsburg house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Kingsburg Streets, ZIP, and Permits
Kingsburg is an incorporated city on the southeast edge of Fresno County at Highway 99. This page uses ZIP 93631. Area code is 559. 93631 is larger than the city limits and also covers unincorporated Kingsburg-area roads that can sit in Fresno County, Kings County, or Tulare County. Text the street so the bid matches City of Kingsburg — not City of Selma Building at 1710 Tucker Street, not City of Fowler Building at 128 S. 5th Street, not City of Parlier Community Development at 1100 E. Parlier Avenue, not City of Dinuba Building at 1088 E. Kamm Avenue in Tulare County, and not Fresno County Building and Safety at 2220 Tulare Street in Fresno.
Permits for City of Kingsburg addresses run through the City of Kingsburg Building Department, 1401 Draper Street, Kingsburg, CA 93631. Call (559) 897-5328 for Building. Inspection requests: (559) 897-6526 by 4:00 p.m. the day before. Email buildingplanning@cityofkingsburg-ca.gov. The Building counter is Monday–Thursday; inspections still run on Fridays. Downtown civic buildings sit around Draper Street and Sierra Street. City of Selma Building is a different office. City of Fowler Building is a different office. City of Parlier Community Development is a different office. City of Dinuba Building is a different office and a different county. Fresno County Building and Safety at 2220 Tulare Street is a different office.
Selma sits northwest on Highway 99. Traver sits southeast in Tulare County. Parlier sits north. Dinuba sits east in Tulare County. Text the street so the bid matches City of Kingsburg — not a Selma Tucker Street desk, not a Traver mailbox, not a Dinuba Kamm Avenue counter, and not a county-road address that only uses a Kingsburg mailing ZIP.
Downtown Kingsburg sits on Draper Street, Sierra Street, Simpson Street, Marion Street, Lewis Street, Smith Street, Tulare Street, Lincoln Street, and California Street. 18th Avenue and 10th Avenue are main north-south streets. Golden State Boulevard runs parallel to Highway 99. Sierra Street is also State Route 201. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Draper Street tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Kingsburg Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Kingsburg, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Kingsburg, CA
This page is steel and metal stud framing in Kingsburg — 93631 ZIP, City of Kingsburg, Fresno County — from our Fairfield shop. Building Department is at 1401 Draper Street. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Kingsburg is Selma, Traver, or Dinuba. No Selma or Dinuba desk for a City of Kingsburg street address. No storefront on Draper Street. No structural steel building. No promise that metal studs hold the building up. No claim that every 93631 address is inside city limits. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Selma, Traver, Parlier, Dinuba, and Fresno County are different places. This page is Kingsburg, CA, ZIP 93631, City of Kingsburg, Fresno County — text the street so the permit office matches the address.
Kingsburg Metal Stud FAQs
Do you do steel / metal stud framing in Kingsburg?
Yes. Interior light-gauge metal stud framing in Kingsburg, CA from our Fairfield shop — partitions, Draper Street and Sierra Street TIs, Golden State Boulevard interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Kingsburg the same as Selma or Dinuba?
No. Kingsburg is its own incorporated city on the southeast edge of Fresno County. Selma sits northwest on Highway 99. Dinuba sits east in Tulare County. Building permits for this page run through the City of Kingsburg Building Department at 1401 Draper Street — not City of Selma and not City of Dinuba.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Kingsburg houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Draper Street TIs, Sierra Street shops, Golden State Boulevard commercial partitions, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Draper Street or Sierra Street?
Yes. Occupied retail, restaurant, office, and downtown Swedish Village tenant improvements on Draper Street, Sierra Street, Simpson Street, and Golden State Boulevard are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Kingsburg buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. A full TI is still a construction job — plan rooms.
Does 93631 only cover the City of Kingsburg?
93631 is the Kingsburg ZIP. It also covers unincorporated roads outside city limits that can sit in Fresno County, Kings County, or Tulare County. Text the street so the bid matches City of Kingsburg — not Fresno County Building in Fresno and not a Tulare County Traver address.
Do you work Draper Street, Sierra Street, and Golden State Boulevard?
Yes. Draper Street, Sierra Street, Simpson Street, Marion Street, Lewis Street, Smith Street, Tulare Street, Lincoln Street, California Street, 18th Avenue, 10th Avenue, 14th Avenue, Golden State Boulevard, Kern Street, and other City of Kingsburg addresses are on this framing page. Text the street with the photos.
What ZIP does this Kingsburg page cover?
This page covers 93631, the Kingsburg ZIP. Text the street with the photos so the bid matches City of Kingsburg — not Selma 93662, not Parlier 93648, and not Dinuba 93618.
Who issues the permit in Kingsburg?
City of Kingsburg Building Department, 1401 Draper Street, Kingsburg, CA 93631. Call (559) 897-5328 for Building. Inspections: (559) 897-6526. City of Selma Building is a different office. City of Fowler Building is a different office. City of Parlier Community Development is a different office. City of Dinuba Building is a different office. Fresno County Building and Safety at 2220 Tulare Street is a different office.
How much does metal stud framing cost in Kingsburg?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Kingsburg address uses the City of Kingsburg Building Department — not a Selma, Fowler, Parlier, Dinuba, or Fresno County unincorporated permit.
Need Kingsburg Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099