Kerman, CA 93630 • City of Kerman, Fresno County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Kerman, CA
Light-gauge steel and metal stud framing in Kerman — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Madera Avenue downtown build-outs, Whitesbridge Road shops, California Avenue interiors, and house remodels in 93630.
Kerman Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Madera Avenue storefront. Kerman is an incorporated city in western Fresno County at Highway 180 and Highway 145, about 15 miles west of Fresno. It is not Fresno, not San Joaquin, and it is not Mendota. This page is steel / metal stud framing at City of Kerman addresses — with 93630 as the ZIP on this page — Madera Avenue, Whitesbridge Avenue, California Avenue, Goldenrod Avenue, First Street, and Kearney Boulevard. A county-road Kerman mailbox can still be Fresno County Building. The street decides the bid.
Text “Kerman” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Kerman
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 93630 Kerman addresses. This is the skeleton the board hangs on.
Madera Avenue and Whitesbridge TIs
Shop, restaurant, office, and downtown build-outs on Madera Avenue and Whitesbridge Avenue when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
California Avenue and Goldenrod interiors
Shop partitions and house walls on California Avenue, Goldenrod Avenue, Kearney Boulevard, First Street, and Del Norte Avenue. Highway 180 is the main east-west approach to Fresno — the city line still decides the permit office.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Kerman house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Kerman Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Madera Avenue TI, Whitesbridge Avenue shop, California Avenue commercial wall, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, Highway 180 corridor interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Kerman house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Kerman Streets, ZIP, and Permits
Kerman is an incorporated city in western Fresno County at Highway 180 and Highway 145. This page uses ZIP 93630. Area code is 559. 93630 is larger than the city limits and also covers unincorporated Kerman-area roads. Text the street so the bid matches City of Kerman — not City of Fresno Building, not City of San Joaquin Building, not City of Mendota Building, and not Fresno County Building and Safety at 2220 Tulare Street in Fresno.
Permits for City of Kerman addresses run through the City of Kerman Building Division, 850 S. Madera Avenue, Kerman, CA 93630. Call (559) 550-0835 for permits. Inspection requests: (559) 550-0829 by 4:00 p.m. for the next business day. Email buildingonline@cityofkerman.gov. Planning is in the same building. Public Works sits at 15201 W. California Avenue. Downtown civic buildings sit around Madera Avenue and California Avenue. City of Fresno Building is a different office. City of San Joaquin Building is a different office. City of Mendota Building is a different office. Fresno County Building and Safety at 2220 Tulare Street is a different office.
Fresno sits east on Highway 180 / Whitesbridge. Biola sits north. San Joaquin sits west. Mendota sits farther west. Text the street so the bid matches City of Kerman — not a Fresno desk, not a San Joaquin counter, not a Mendota permit, and not a county-road address that only uses a Kerman mailing ZIP.
Downtown Kerman sits on Madera Avenue, First Street, Second Street, Third Street, D Street, F Street, G Street, and California Avenue. Madera Avenue is Highway 145, the main north-south commercial strip. Whitesbridge Avenue is Highway 180, the main east-west approach. Goldenrod Avenue, Del Norte Avenue, Kearney Boulevard, and Vineland Avenue are the usual side streets. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Madera Avenue tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Kerman Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Kerman, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Kerman, CA
This page is steel and metal stud framing in Kerman — 93630 ZIP, City of Kerman, Fresno County — from our Fairfield shop. Building Division is at 850 S. Madera Avenue. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Kerman is Fresno, San Joaquin, or Mendota. No Fresno or Mendota desk for a City of Kerman street address. No storefront on Madera Avenue. No structural steel building. No promise that metal studs hold the building up. No claim that every 93630 address is inside city limits. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Fresno, Biola, San Joaquin, Mendota, and Fresno County are different places. This page is Kerman, CA, ZIP 93630, City of Kerman, Fresno County — text the street so the permit office matches the address.
Kerman Metal Stud FAQs
Do you do steel / metal stud framing in Kerman?
Yes. Interior light-gauge metal stud framing in Kerman, CA from our Fairfield shop — partitions, Madera Avenue and Whitesbridge Avenue TIs, California Avenue interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Kerman the same as Fresno or San Joaquin?
No. Kerman is its own incorporated city in western Fresno County at Highway 180 and Highway 145. Fresno sits east. San Joaquin sits west. Building permits for this page run through the City of Kerman Building Division at 850 S. Madera Avenue — not City of Fresno and not City of San Joaquin.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Kerman houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Madera Avenue TIs, Whitesbridge Avenue shops, California Avenue commercial partitions, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Madera Avenue or Whitesbridge?
Yes. Occupied retail, restaurant, office, and downtown tenant improvements on Madera Avenue, Whitesbridge Avenue, California Avenue, and Goldenrod Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Kerman buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. A full TI is still a construction job — plan rooms.
Does 93630 only cover the City of Kerman?
93630 is the Kerman ZIP. It also covers unincorporated roads outside city limits. Text the street so the bid matches City of Kerman — not Fresno County Building in Fresno.
Do you work Madera Avenue, Whitesbridge, and California Avenue?
Yes. Madera Avenue, Whitesbridge Avenue, California Avenue, Goldenrod Avenue, Kearney Boulevard, First Street, Second Street, Third Street, D Street, F Street, G Street, Del Norte Avenue, Vineland Avenue, and other City of Kerman addresses are on this framing page. Text the street with the photos.
What ZIP does this Kerman page cover?
This page covers 93630, the Kerman ZIP. Text the street with the photos so the bid matches City of Kerman — not Fresno 93706, not San Joaquin 93660, and not Mendota 93640.
Who issues the permit in Kerman?
City of Kerman Building Division, 850 S. Madera Avenue, Kerman, CA 93630. Call (559) 550-0835 for permits. Inspections: (559) 550-0829. City of Fresno Building is a different office. City of San Joaquin Building is a different office. City of Mendota Building is a different office. Fresno County Building and Safety at 2220 Tulare Street is a different office.
How much does metal stud framing cost in Kerman?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Kerman address uses the City of Kerman Building Division — not a Fresno, San Joaquin, Mendota, or Fresno County unincorporated permit.
Need Kerman Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099