Galt, CA 95632 • Sacramento County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Galt, CA
Light-gauge steel and metal stud framing in Galt — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: C Street shops, Lincoln Way interiors, Industrial Drive build-outs, and house remodels in 95632.
Galt Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a C Street storefront. Galt is its own incorporated city in Sacramento County. It is not Elk Grove and it is not Lodi. This page is steel / metal stud framing at City of Galt addresses — with 95632 as the ZIP on this page — C Street, Lincoln Way, Civic Drive, and Industrial Drive. It is not Elk Grove, Lodi, Herald, or Walnut Grove.
Text “Galt” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Galt
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 95632 City of Galt addresses. This is the skeleton the board hangs on.
C Street and Lincoln Way TIs
Shop, restaurant, office, and retail build-outs on C Street, A Street, and Lincoln Way when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Industrial Drive, Civic, and Twin Cities interiors
Shop partitions, office interiors, and house walls on Industrial Drive, Civic Drive, Twin Cities Road, Highway 99 frontage, and other City of Galt streets.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Galt house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Galt Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | C Street TI, Lincoln Way shop, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Galt house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Galt Streets, ZIP, and Permits
Galt is an incorporated city in Sacramento County. This page leads with ZIP 95632. Area codes are 209 and 350. Permits for City of Galt addresses run through City of Galt Community Development, Building Division, at 495 Industrial Drive, Galt, CA 95632. Call (209) 366-7200. Email: buildingdivision@cityofgalt.org. Website: cityofgalt.org. 24-hour inspection line: (209) 745-1337. Counter hours are typically Monday–Thursday; the office is closed Fridays and major holidays — confirm current hours on the city site. Some permit types go through the city’s online portal. Planning: (209) 366-7230. Sacramento County Building is a different office — that is for unincorporated Sacramento County land. 95632 can also cover addresses outside city limits, so text the street.
Elk Grove sits northwest on 95624 / 95757 / 95758. Lodi sits south in San Joaquin County on 95240 / 95242. Herald sits east on 95638. Acampo sits south on 95220. Wilton sits north on 95693. Walnut Grove sits west on 95690. Text the street so the bid matches City of Galt — not Elk Grove, not Lodi, not Sacramento County Building.
C Street is the downtown gateway off Highway 99. A Street, Lincoln Way / South Lincoln Way, Civic Drive, Industrial Drive, Twin Cities Road, and the Highway 99 frontage show up on a lot of plans. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a C Street tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Galt Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Galt, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Galt, CA
This page is steel and metal stud framing in Galt — 95632 ZIP, City of Galt, Sacramento County — from our Fairfield shop. Building Division is at 495 Industrial Drive. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that City of Galt is Elk Grove or Lodi. No Sacramento County Building hall for city addresses. No storefront on C Street. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Elk Grove, Lodi, Herald, Acampo, Wilton, and Walnut Grove are different places. This page is City of Galt, CA, with 95632 as the ZIP — text the street so the permit office matches the address.
Galt Metal Stud FAQs
Do you do steel / metal stud framing in Galt?
Yes. Interior light-gauge metal stud framing in Galt, CA from our Fairfield shop — partitions, C Street and Lincoln Way TIs, Industrial Drive interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Galt the same as Elk Grove or Lodi?
No. The City of Galt is its own incorporated city in Sacramento County. Elk Grove sits northwest. Lodi sits south in San Joaquin County. Building permits for this page run through City of Galt Building Division at 495 Industrial Drive — not Elk Grove, and not Sacramento County Building for unincorporated land.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Galt houses use metal studs or wood?
Most house walls here are still wood. Metal wins on C Street TIs, Lincoln Way shops, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on C Street or Lincoln Way?
Yes. Occupied retail, restaurant, office, and shop-building tenant improvements on C Street, A Street, Lincoln Way, Civic Drive, and Industrial Drive are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Galt buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. A full TI is still a construction job — plan rooms.
Is Galt the same as Herald, Acampo, or Walnut Grove?
No. Herald sits east on 95638. Acampo sits south on 95220. Walnut Grove sits west on 95690. Text the street so the bid matches City of Galt.
Do you work C Street, Lincoln Way, Industrial Drive, and Twin Cities?
Yes. C Street, A Street, Lincoln Way, Civic Drive, Industrial Drive, Twin Cities Road, Highway 99 frontage, and other City of Galt addresses are on this framing page. Text the street with the photos.
What ZIP does this Galt page cover?
This page leads with 95632. That ZIP also covers some land outside city limits. Text the street with the photos so the bid matches the City of Galt address — not Elk Grove and not Lodi.
Who issues the permit in Galt?
City of Galt Building Division, 495 Industrial Drive, Galt, CA 95632. Call (209) 366-7200. Inspection line: (209) 745-1337. Email buildingdivision@cityofgalt.org. Sacramento County Building is a different office for unincorporated land. Elk Grove Building is a different office. Lodi Building is a different office in a different county.
How much does metal stud framing cost in Galt?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work inside City of Galt uses a City of Galt building permit — not an Elk Grove or Lodi permit, and not Sacramento County Building for a city address.
Need Galt Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099