Byron, CA 94514 • Unincorporated Contra Costa County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Byron, CA
Light-gauge steel and metal stud framing in Byron — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Byron Highway shops, Camino Diablo interiors, Vasco Road build-outs, and house remodels in 94514.
Byron Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Byron Highway storefront. Byron is an unincorporated census-designated place in Contra Costa County. It is not the City of Brentwood and it is not Discovery Bay. This page is steel / metal stud framing at Byron addresses — with 94514 as the ZIP on this page — Byron Highway, Camino Diablo, Main Street, and Bixler Road. It is not Brentwood, Discovery Bay, Knightsen, or Tracy.
Text “Byron” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street decides the bid.
Metal Stud Work We Do in Byron
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 94514 Byron addresses. This is the skeleton the board hangs on.
Byron Highway and Main Street TIs
Shop, restaurant, office, shop-building, and light-commercial build-outs on Byron Highway and Main Street when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Camino Diablo, Bixler, and Vasco interiors
Shop partitions, office interiors, and house walls on Camino Diablo, Bixler Road, Vasco Road, Byron Hot Springs Road, Bruns Road, Byer Road, Hoffman Lane, Walnut Boulevard, and Grant Line Road.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Byron house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Byron Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Byron Highway TI, Camino Diablo shop, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Byron house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Byron Streets, ZIP, and Permits
Byron is an unincorporated census-designated place in Contra Costa County. It does not have a city building department. This page leads with ZIP 94514. Area code is 925. Permits for Byron / unincorporated Contra Costa County addresses run through Contra Costa County Department of Conservation and Development, Application and Permit Center / Building Inspection Division, at 30 Muir Road, Martinez, CA 94553. Call (925) 655-2700. Apply and track work through the ePermits Center. Building inspection scheduling and the building code hotline: (925) 655-2737. Website: contracosta.ca.gov. Contractors working in unincorporated Byron also need a Contra Costa County business license through the Treasurer-Tax Collector, 625 Court Street, Room 100, Martinez, CA 94553, even if the shop is based in another city. City of Brentwood Building and City of Tracy Building are different offices.
Discovery Bay sits northeast on 94505. Brentwood sits northwest on 94513 and is an incorporated city. Knightsen sits north on 94548. Tracy and Mountain House sit southeast in San Joaquin County. Livermore sits southwest in Alameda County. Text the street so the bid matches unincorporated Byron — not Brentwood City Hall, not Discovery Bay as if it were the same town, not Tracy.
Byron Highway is the main corridor through town. Camino Diablo, Main Street, Bixler Road, Vasco Road, Byron Hot Springs Road, Bruns Road, Byer Road, Hoffman Lane, Walnut Boulevard, Grant Line Road, Byron-Bethany Road, and Mountain House Road show up on a lot of plans. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Byron Highway tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Byron Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Byron, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Byron, CA
This page is steel and metal stud framing in Byron — 94514 ZIP, unincorporated Contra Costa County — from our Fairfield shop. County Conservation and Development is at 30 Muir Road in Martinez. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Byron is the City of Brentwood or Discovery Bay. No Brentwood Building hall for Byron addresses. No storefront on Byron Highway. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Brentwood, Discovery Bay, Knightsen, Tracy, and Livermore are different places. This page is Byron, CA, ZIP 94514, unincorporated Contra Costa County — text the street so the permit office matches the address.
Byron Metal Stud FAQs
Do you do steel / metal stud framing in Byron?
Yes. Interior light-gauge metal stud framing in Byron, CA from our Fairfield shop — partitions, Byron Highway and Main Street TIs, Camino Diablo and Bixler Road interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Byron the same as Brentwood or Discovery Bay?
No. Byron is unincorporated Contra Costa County. Brentwood sits northwest and is its own incorporated city on 94513. Discovery Bay sits northeast on 94505. Building permits for this page run through Contra Costa County Conservation and Development at 30 Muir Road in Martinez — not Brentwood City Hall, and not a Discovery Bay city hall. Discovery Bay is also unincorporated, but it is a different place and ZIP.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Byron houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Byron Highway TIs, Camino Diablo shops, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Byron Highway or Camino Diablo?
Yes. Occupied retail, restaurant, office, and shop-building tenant improvements on Byron Highway, Main Street, and Camino Diablo are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Byron buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. A full TI is still a construction job — plan rooms.
Is Byron the same as Knightsen, Tracy, or Livermore?
No. Knightsen sits north on 94548. Tracy sits southeast in San Joaquin County. Livermore sits southwest in Alameda County. Text the street so the bid matches Byron 94514.
Do you work Byron Highway, Camino Diablo, Bixler, and Vasco?
Yes. Byron Highway, Camino Diablo, Main Street, Bixler Road, Vasco Road, Byron Hot Springs Road, Bruns Road, Byer Road, Hoffman Lane, Walnut Boulevard, Grant Line Road, and other 94514 Byron addresses are on this framing page. Text the street with the photos.
What ZIP does this Byron page cover?
This page leads with 94514, the Byron ZIP. Discovery Bay uses 94505. Text the street with the photos so the bid matches unincorporated Byron — not Brentwood 94513 and not Discovery Bay 94505.
Who issues the permit in Byron?
Contra Costa County Department of Conservation and Development, 30 Muir Road, Martinez, CA 94553. Call (925) 655-2700. Inspection / building code line: (925) 655-2737. Apply through the ePermits Center. Brentwood Building is a different office. Tracy Building is a different office in a different county.
How much does metal stud framing cost in Byron?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work in unincorporated Byron also uses a Contra Costa County business license through the Treasurer-Tax Collector — not a Brentwood or Tracy city license.
Need Byron Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099