Atwater, CA 95301 • City of Atwater, Merced County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Atwater, CA
Light-gauge steel and metal stud framing in Atwater — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Broadway Avenue shops, Bellevue Road build-outs, Atwater Boulevard interiors, and house remodels in 95301.
Atwater Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Broadway Avenue storefront. Atwater is an incorporated city in Merced County on State Route 99, northwest of Merced. It is not Merced, not Winton, and it is not unincorporated Merced County. This page is steel / metal stud framing at City of Atwater addresses — with 95301 as the ZIP on this page — Broadway Avenue, Bellevue Road, Atwater Boulevard, Winton Way, and First Street. A county-road Atwater mailbox can still be Merced County Building. The street decides the bid.
Text “Atwater” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Atwater
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 95301 Atwater addresses. This is the skeleton the board hangs on.
Broadway Avenue and Bellevue TIs
Shop, restaurant, office, and downtown build-outs on Broadway Avenue and Bellevue Road when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Atwater Boulevard and Winton Way interiors
Shop partitions and house walls on Atwater Boulevard, Winton Way, First Street, Third Street, Fifth Street, Applegate Road, and Station Avenue. State Route 99 sits on the west side — the city line still decides the permit office.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Atwater house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on an Atwater Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Broadway Avenue TI, Bellevue Road shop, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, shop TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Atwater house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Atwater Streets, ZIP, and Permits
Atwater is an incorporated city in Merced County. This page uses ZIP 95301. Area code is 209. 95301 is larger than the city limits and also covers McSwain, Franklin, and unincorporated Atwater-area roads. Text the street so the bid matches City of Atwater — not Merced County Building on M Street in Merced, and not City of Merced Building.
Permits for City of Atwater addresses run through the City of Atwater Building Division at City Hall, 1350 Broadway Avenue, Atwater, CA 95301. Call (209) 357-6343. Email: building@atwater.org. Planning: (209) 357-6349, planning@atwater.org. Permit counter hours are Monday–Friday, 8:00 a.m. to 4:00 p.m., closed 12:00 p.m. to 1:00 p.m. Apply through the City of Atwater Cloudpermit portal or at the Building window. Inspection request line: (209) 356-2529. Inspections must be called in 24 hours in advance, before 4:00 p.m., for a next-day inspection. City of Merced Building is a different office. Merced County Building and Safety at 2222 M Street, Merced, is a different office. Winton is unincorporated and uses the county desk.
Merced sits southeast. Winton sits north. Livingston sits west. Castle Commerce Center sits east on the old air-base side. State Route 99 runs along the west edge. Text the street so the bid matches City of Atwater — not Merced City Hall, not Winton county roads, and not a McSwain address outside city limits.
Broadway Avenue holds City Hall and a lot of commercial frontage. Bellevue Road is a main east-west arterial. Atwater Boulevard, Winton Way, First Street, Third Street, Fifth Street, Applegate Road, Station Avenue, and Drakeley Avenue show up on a lot of plans. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Broadway Avenue tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How an Atwater Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Atwater, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Atwater, CA
This page is steel and metal stud framing in Atwater — 95301 ZIP, City of Atwater, Merced County — from our Fairfield shop. City Hall is at 1350 Broadway Avenue. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Atwater is Merced or Winton. No Merced County Building desk on M Street for a City of Atwater street address. No storefront on Broadway Avenue. No structural steel building. No promise that metal studs hold the building up. No claim that every 95301 address is inside city limits. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Merced, Winton, Livingston, and McSwain are different places. This page is Atwater, CA, ZIP 95301, City of Atwater, Merced County — text the street so the permit office matches the address.
Atwater Metal Stud FAQs
Do you do steel / metal stud framing in Atwater?
Yes. Interior light-gauge metal stud framing in Atwater, CA from our Fairfield shop — partitions, Broadway Avenue and Bellevue Road TIs, Atwater Boulevard interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Atwater the same as Merced or Winton?
No. Atwater is an incorporated city in Merced County. Merced sits southeast. Winton sits north and is unincorporated. Building permits for this page run through the City of Atwater Building Division at 1350 Broadway Avenue — not City of Merced Building and not Merced County Building on M Street.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Atwater houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Broadway Avenue TIs, Bellevue Road shops, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Broadway Avenue?
Yes. Occupied retail, restaurant, office, and downtown tenant improvements on Broadway Avenue and Bellevue Road are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Atwater buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. A full TI is still a construction job — plan rooms.
Does 95301 only cover the City of Atwater?
95301 is the Atwater ZIP. It also covers McSwain, Franklin, and unincorporated roads outside city limits. Text the street so the bid matches City of Atwater — not Merced County Building in Merced.
Do you work Broadway Avenue, Bellevue Road, and Atwater Boulevard?
Yes. Broadway Avenue, Bellevue Road, Atwater Boulevard, Winton Way, First Street, Third Street, Fifth Street, Applegate Road, Station Avenue, Drakeley Avenue, and other City of Atwater addresses are on this framing page. Text the street with the photos.
What ZIP does this Atwater page cover?
This page covers 95301, the Atwater ZIP. Text the street with the photos so the bid matches City of Atwater — not Merced 95340 / 95348 and not Winton 95388.
Who issues the permit in Atwater?
City of Atwater Building Division, 1350 Broadway Avenue, Atwater, CA 95301. Call (209) 357-6343. Email building@atwater.org. Inspection request line: (209) 356-2529. City of Merced Building is a different office. Merced County Building and Safety at 2222 M Street is a different office.
How much does metal stud framing cost in Atwater?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Atwater address uses the City of Atwater Building Division — not a Merced city or Merced County unincorporated permit.
Need Atwater Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099