Huntington Beach, CA 92646–92649 • Orange County • Incorporated 1909 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Huntington Beach, CA
Light-gauge steel and metal stud framing in Huntington Beach — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Main Street shops, Beach Boulevard suites, Pacific Coast Highway interiors, and house remodels. Huntington Beach is Orange County. Huntington Park is Los Angeles County.
Huntington Beach Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Huntington Beach storefront. This page is steel / metal stud framing in Huntington Beach, CA — Downtown and Main Street, Beach Boulevard, Pacific Coast Highway, Magnolia, Goldenwest, Warner, and Edinger.
Text “Huntington Beach” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street still decides which city desk reviews the wall.
Metal Stud Work We Do in Huntington Beach
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 92646, 92647, 92648, and 92649. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, hotel, and office build-outs on Main Street, Beach Boulevard, Pacific Coast Highway, and around Bella Terra. If the drawing says steel studs, that is the bid. Commercial framing →
Downtown, PCH, and plaza interiors
Shop partitions, medical-office walls, and rated assemblies on Main Street, Pacific City / PCH blocks, Beach Boulevard, and Warner Avenue corridors.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Huntington Beach house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Huntington Beach Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Main Street TI, Beach Boulevard shops, PCH hotel and restaurant interiors, Bella Terra-area suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, hotel corridors, office interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls in Oak View, Goldenwest, Seacliff, Huntington Harbour, and the tracts off Magnolia, Brookhurst, and Heil with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
PCH vs Beach Blvd vs the City Line
Huntington Beach is an incorporated Orange County city — Surf City USA — with standard ZIPs 92646, 92647, 92648, and 92649, plus P.O. boxes 92605 and 92615. Most of town uses 714 / 657. A slice on the west and north edge still shows 562. Fountain Valley and Westminster sit inland. Costa Mesa and Newport Beach sit southeast. Seal Beach sits northwest. Permits inside city limits run through the City of Huntington Beach Building Division / Permit Center at 2000 Main Street, 92648. Sharing “Huntington” in the name does not share a city hall with Huntington Park.
Pacific Coast Highway, Main Street, and Beach Boulevard (State Route 39) carry the shops, hotels, and restaurants. Magnolia Street, Brookhurst Street, Goldenwest Street, Warner Avenue, Edinger Avenue, Bolsa Chica Street, Gothard Street, Adams Avenue, and Heil Avenue pick up more house streets and inland suites. The 405 runs the inland edge. Occupied shops, PCH hotels, and tract houses change the layout — not the stud spec.
Downtown, Seacliff, Huntington Harbour, Oak View, Goldenwest, and Bolsa Chica-Heil are all Huntington Beach if the address is inside city limits. Sunset Beach was annexed into Huntington Beach in 2011; the permit desk is still City of Huntington Beach, not Seal Beach and not the old county island. Text the street so we bid the right city.
The usual mismatch is treating a Beach Boulevard tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house or a hotel up. Occupied houses, open Main Street shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Huntington Beach Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Huntington Beach, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Main Street shop, PCH hotel corridor, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Huntington Beach, CA
This page is steel and metal stud framing in Huntington Beach — ZIPs 92646, 92647, 92648, and 92649, an incorporated Orange County city, from our Fairfield shop. Permits inside city limits run through the City of Huntington Beach, not Fountain Valley, Westminster, Costa Mesa, Newport Beach, Seal Beach, or Huntington Park. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Huntington Beach address. No structural steel building. No promise that metal studs hold a house or a hotel up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Huntington Beach — not Huntington Park, Fountain Valley, Westminster, Costa Mesa, Newport Beach, or Seal Beach.
Huntington Beach Metal Stud FAQs
Do you do steel / metal stud framing in Huntington Beach?
Yes. Interior light-gauge metal stud framing in Huntington Beach, CA from our Fairfield shop — partitions, Main Street and Beach Boulevard TIs, Pacific Coast Highway interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Huntington Beach the same as Huntington Park?
No. Huntington Beach is an Orange County coastal city. Huntington Park is a Los Angeles County city. They share a first name. They do not share a building department, a ZIP, or this page.
Is Huntington Beach in Los Angeles County?
No. Huntington Beach is in Orange County. The 562 slice and the Seal Beach / Long Beach border make people guess L.A. The permit desk is still City of Huntington Beach at 2000 Main Street.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Huntington Beach houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Main Street, Beach Boulevard, and PCH TIs, shop and hotel interiors, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Main Street, Beach Blvd, or PCH?
Yes. Occupied retail, restaurant, and hotel TIs on Main Street, Beach Boulevard, Pacific Coast Highway, Magnolia, and Warner are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Huntington Beach buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Main Street shop, a PCH hotel corridor, or an after-hours office. A full TI is still a construction job — plan rooms.
Do you work Downtown, Harbour, Seacliff, and Bella Terra?
Yes. Downtown / Main Street, Huntington Harbour, Seacliff, Oak View, Goldenwest, Bolsa Chica, Bella Terra at Beach and Edinger, and Sunset Beach addresses inside city limits are on the same framing page. Text the street with the photos.
Who issues the permit in Huntington Beach?
The City of Huntington Beach Building Division / Permit Center at 2000 Main Street, CA 92648. Fountain Valley, Westminster, Costa Mesa, Newport Beach, Seal Beach, and Huntington Park are different desks — that is why the street matters.
How much does metal stud framing cost in Huntington Beach?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Huntington Beach Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099