Hermosa Beach, CA 90254 • Los Angeles County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Hermosa Beach, CA
Light-gauge steel and metal stud framing in Hermosa Beach — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Pier Avenue shops, Hermosa Avenue interiors, walk-street rooms off The Strand, and houses east of Pacific Coast Highway on Valley and Prospect. A downtown TI and a tight beach lot are not the same stud job.
Hermosa Beach Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Hermosa storefront. This page is steel / metal stud framing in Hermosa Beach, CA 90254 — Pier Avenue, Hermosa Avenue, The Strand, Pacific Coast Highway, Aviation Boulevard, Artesia Boulevard, Valley Drive, Prospect Avenue, and the numbered walk streets from 1st to 35th.
Text “Hermosa” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Hermosa Beach
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 90254. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, and office build-outs on Pier Avenue and Hermosa Avenue. If the drawing says steel studs, that is the bid. Commercial framing →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Hermosa house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Hermosa Beach Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Pier Avenue TI, Hermosa Avenue shops, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams and columns that hold the building up — that is structural steel, a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, door-heavy restaurant TI, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Hermosa house walls with no commercial spec — walk-street rooms and east-of-PCH bedrooms on Valley and Prospect | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Pier Avenue vs The Strand vs East of PCH
Hermosa Beach is its own city in the South Bay — ZIP 90254 — between Manhattan Beach and Redondo Beach. It is not Manhattan Beach and it is not Redondo. Downtown sits on Pier Avenue and Hermosa Avenue. Walk streets run from Hermosa Avenue out to The Strand. Pacific Coast Highway, Aviation, Artesia, Valley Drive, and Prospect take the east side. Herondo Street is the south line with Redondo Beach.
Marine air and salt do not make metal magic. Galvanized light-gauge steel is not food for termites and it does not twist like wet lumber. It will still rust if the coating is cut and the wall stays wet. The usual mismatch is treating a Pier Avenue tenant wall like a bedroom 2×4 — or promising a factory-flat skim on a walk-street house that was never framed straight. Tight lots and occupied shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with.
Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Hermosa Beach Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Hermosa, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Hermosa Beach, CA
This page is steel and metal stud framing in Hermosa Beach — ZIP 90254, Los Angeles County, from our Fairfield shop. Permits run through the City of Hermosa Beach. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Hermosa address. No structural steel building. No promise that metal studs hold the house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Hermosa Beach — not Manhattan Beach and not Redondo Beach.
Hermosa Beach Metal Stud FAQs
Do you do steel / metal stud framing in Hermosa Beach?
Yes. Interior light-gauge metal stud framing in Hermosa Beach, CA 90254 from our Fairfield shop — partitions, TI walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is this Manhattan Beach or Redondo?
No. This page is the City of Hermosa Beach. Manhattan Beach is north. Redondo Beach is south of Herondo Street. Text the street so we bid the right parcel.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams and columns that hold the building up are a different contractor.
Do Hermosa houses use metal studs or wood?
Most house walls here are still wood. Metal wins on commercial TI, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Will ocean air rust metal studs?
Galvanizing helps. Standing water and cut coating do not. Metal studs are not a submarine. Keep the cavity dry and close the wall the right way.
Can you frame a shop on Pier Avenue?
Yes. Occupied retail and restaurant TIs on Pier Avenue and Hermosa Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Hermosa buildings?
Yes. Floors are protected and the layout is planned around an open shop or an occupied house. A full TI is still a construction job — plan rooms.
Do you work Pier Avenue, The Strand, and Valley Drive?
Yes. Pier Avenue, Hermosa Avenue, The Strand, Pacific Coast Highway, Aviation Boulevard, Artesia Boulevard, Valley Drive, Prospect Avenue, and the numbered walk streets are on the same framing page. Text the street with the photos.
How much does metal stud framing cost in Hermosa Beach?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Hermosa Beach Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099