Hacienda Heights, CA 91745 • Unincorporated Los Angeles County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Hacienda Heights, CA
Light-gauge steel and metal stud framing in Hacienda Heights — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Hacienda Boulevard shops, Colima and Gale interiors, Azusa Avenue offices, and hillside house rooms off Stimson and Halliburton. A boulevard TI and a Puente Hills remodel are not the same stud job.
Hacienda Heights Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Hacienda Heights storefront. This page is steel / metal stud framing in Hacienda Heights, CA 91745 — Hacienda Boulevard, Colima Road, Gale Avenue, Azusa Avenue, Halliburton Road, Stimson Avenue, 7th Avenue, and Turnbull Canyon Road.
Text “Hacienda Heights” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Hacienda Heights
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 91745. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, and office build-outs on Hacienda Boulevard near Halliburton and on Azusa near Colima. If the drawing says steel studs, that is the bid. Commercial framing →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Hacienda Heights house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Hacienda Heights Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Hacienda Boulevard TI, Colima and Gale shops, rated commercial walls, or a hillside remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or hillside structure that hold the house up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, door-heavy restaurant TI, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Hacienda Heights house walls with no commercial spec — rooms off Stimson, Halliburton, and the canyon streets | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Hacienda Boulevard vs Colima vs the Hills
Hacienda Heights is an unincorporated community in the East San Gabriel Valley — ZIP 91745 — between Whittier, La Habra Heights, the City of Industry, and Rowland Heights. It is not a city and it is not Rowland Heights. Hacienda Boulevard near Halliburton is the commercial core. Azusa Avenue near Colima is the east-side center. Gale Avenue and 7th Avenue take more corridor shops. Stimson, Turnbull Canyon, and the Puente Hills streets take hillside houses.
The usual mismatch is treating a Hacienda Boulevard tenant wall like a bedroom 2×4 — or promising a factory-flat skim on a hillside house wall that was never framed straight. Interior metal studs do not hold a hillside house up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge.
Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Hacienda Heights Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Hacienda Heights, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Hacienda Heights, CA
This page is steel and metal stud framing in Hacienda Heights — ZIP 91745, an unincorporated Los Angeles County community, from our Fairfield shop. Permits run through Los Angeles County, not a city hall. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Hacienda Heights address. No structural steel building. No promise that metal studs hold a hillside house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Hacienda Heights — not Rowland Heights, Whittier, or La Puente.
Hacienda Heights Metal Stud FAQs
Do you do steel / metal stud framing in Hacienda Heights?
Yes. Interior light-gauge metal stud framing in Hacienda Heights, CA 91745 from our Fairfield shop — partitions, TI walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Hacienda Heights its own city?
No. Hacienda Heights is unincorporated Los Angeles County. Permits run through the County, not a city hall. Rowland Heights, Whittier, and La Puente are different places — text the street so we bid the right parcel.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and hillside structure that hold the house up are a different contractor.
Do Hacienda Heights houses use metal studs or wood?
Most house walls here are still wood. Metal wins on commercial TI, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Hacienda Boulevard or Colima?
Yes. Occupied retail and restaurant TIs on Hacienda Boulevard near Halliburton and on Azusa Avenue near Colima are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Hacienda Heights buildings?
Yes. Floors are protected and the layout is planned around an open shop or an occupied house. A full TI is still a construction job — plan rooms.
Do you work Hacienda Boulevard, Colima, and Gale?
Yes. Hacienda Boulevard, Colima Road, Gale Avenue, Azusa Avenue, Halliburton Road, Stimson Avenue, 7th Avenue, and Turnbull Canyon Road are on the same framing page. Text the street with the photos.
How much does metal stud framing cost in Hacienda Heights?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Hacienda Heights Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099