Grand Terrace, CA 92313 • Incorporated 1978 • San Bernardino County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Grand Terrace, CA
Light-gauge steel and metal stud framing in Grand Terrace — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Barton Road shops, Mount Vernon Avenue build-outs, Grand Terrace Road interiors, and house remodels in 92313.
Grand Terrace Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Barton Road storefront. Grand Terrace is an incorporated city in San Bernardino County — Inland Empire — not Colton, not Highgrove, and not Loma Linda. It has its own Building & Safety office at 22795 Barton Road. A Grand Terrace mailing ZIP can still sit outside city limits. This page is steel / metal stud framing at City of Grand Terrace 92313 addresses — Barton Road, Mount Vernon Avenue, La Cadena Drive, Grand Terrace Road, and Michigan Street. The street decides the bid.
Text “Grand Terrace” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Grand Terrace
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in Grand Terrace 92313 addresses. This is the skeleton the board hangs on.
Barton Road TIs
Shop, restaurant, office, and commercial build-outs on Barton Road when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Mount Vernon and La Cadena interiors
Retail and shop partitions on Mount Vernon Avenue, La Cadena Drive, and Grand Terrace Road. Colton sits on three sides — city limits still decide the permit office.
House remodel and ADU partitions
New interior steel walls inside an existing Grand Terrace house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Michigan Street and I-215 interiors
House and shop walls on Michigan Street, Preston Street, Pico Street, and near I-215. Highgrove sits south — the parcel still decides the permit office.
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Grand Terrace Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Barton Road TI, Mount Vernon shop, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, Barton Road TIs, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Grand Terrace house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Grand Terrace Streets, ZIP, and Permits
Grand Terrace is an incorporated city in San Bernardino County — Inland Empire. This page uses street ZIP 92313. Area codes are 909, 840, and 951. Portions of 92313 also touch Colton mailing edges. Text the street so the bid matches City of Grand Terrace Building & Safety — not City of Colton Building at 659 N. La Cadena Drive, not City of Loma Linda Building, and not San Bernardino County Building for Highgrove or another county parcel.
Permits for City of Grand Terrace addresses run through City of Grand Terrace Planning & Development Services, Building & Safety Division, 22795 Barton Road, Grand Terrace, CA 92313. Building: (909) 954-5181. Inspection requests: (909) 954-5200. City site is grandterrace-ca.gov. Unincorporated Highgrove and other county parcels that only use a nearby mailing ZIP run through San Bernardino County Land Use Services / Building & Safety — a different office.
Colton sits north, east, and west. Highgrove sits south. Loma Linda sits east. Riverside sits south. I-215 runs the west side. Text the street so the bid matches City of Grand Terrace for a 92313 city address — not a Colton 92324 permit, and not County Building for a city lot.
Commercial work sits on Barton Road, Mount Vernon Avenue, La Cadena Drive, and Grand Terrace Road. Occupied houses and open shops change the layout — not the stud spec.
The usual mismatch is treating a Barton Road tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Grand Terrace Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Grand Terrace, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Grand Terrace, CA
This page is steel and metal stud framing in Grand Terrace — ZIP 92313, City of Grand Terrace, San Bernardino County — from our Fairfield shop. City Building & Safety is at 22795 Barton Road. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that every 92313 mailing address is inside city limits. No City of Colton permit at 659 N. La Cadena Drive for a Grand Terrace lot. No Highgrove County permit on this page. No storefront on Barton Road. No structural steel building. No promise that metal studs hold the building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Colton, Highgrove, Loma Linda, Riverside, and other addresses that only use a Grand Terrace mailing ZIP are different places. This page is Grand Terrace, CA, ZIP 92313, City of Grand Terrace — text the street so the permit office matches the address.
Grand Terrace Metal Stud FAQs
Do you do steel / metal stud framing in Grand Terrace?
Yes. Interior light-gauge metal stud framing in Grand Terrace, CA from our Fairfield shop — partitions, Barton Road TIs, Mount Vernon interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Grand Terrace a city?
Yes. Grand Terrace incorporated on November 30, 1978. Building permits inside city limits run through City of Grand Terrace Building & Safety at 22795 Barton Road — not Colton, and not County Building.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Grand Terrace houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Barton Road TIs, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Barton Road or Mount Vernon?
Yes. Occupied retail, restaurant, office, and commercial tenant improvements on Barton Road, Mount Vernon Avenue, and La Cadena Drive are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Grand Terrace buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. A full TI is still a construction job — plan rooms.
Does 92313 cover all of Grand Terrace?
92313 is the Grand Terrace street ZIP. Nearby Colton uses 92324. Loma Linda uses 92354. Highgrove is unincorporated. Text the street so the bid matches City of Grand Terrace — not Colton 92324 and not County Building.
Do you work Barton Road, Mount Vernon, and Grand Terrace Road?
Yes. Barton Road, Mount Vernon Avenue, La Cadena Drive, Grand Terrace Road, Michigan Street, Preston Street, Pico Street, and other Grand Terrace 92313 addresses are on this framing page. Text the street with the photos.
What ZIP does this Grand Terrace page cover?
This page covers Grand Terrace 92313 street addresses inside City of Grand Terrace. Text the street with the photos so the bid matches City Building & Safety — not Colton 92324, not Loma Linda 92354, and not County Building for Highgrove.
Who issues the permit in Grand Terrace?
City of Grand Terrace Planning & Development Services, Building & Safety Division, 22795 Barton Road, Grand Terrace, CA 92313. Call (909) 954-5181. City of Colton Building is a different office. San Bernardino County Building & Safety is a different office for unincorporated parcels such as Highgrove.
How much does metal stud framing cost in Grand Terrace?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Grand Terrace 92313 address uses City of Grand Terrace Building & Safety — not a Colton permit, and not County Building unless the lot is unincorporated.
Need Grand Terrace Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099