Goleta, CA 93117 • City of Goleta, Santa Barbara County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Goleta, CA
Light-gauge steel and metal stud framing in Goleta — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Hollister Avenue build-outs, Calle Real shops, Storke Road interiors, and house remodels in 93117.
Goleta Framing From the Fairfield Shop
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Hollister Avenue storefront. Goleta is an incorporated city in Santa Barbara County, west of Santa Barbara on Highway 101. It is not Santa Barbara, not Isla Vista, and it is not UCSB campus. This page is steel / metal stud framing at City of Goleta addresses — with 93117 as the street ZIP on this page — Hollister Avenue, Calle Real, Storke Road, Fairview Avenue, and Los Carneros Road. A “Goleta” mailbox can still be Santa Barbara County Building or a 93111 Santa Barbara mailing address. The street decides the bid.
Text “Goleta” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Goleta
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 93117 Goleta addresses. This is the skeleton the board hangs on.
Hollister Avenue and Calle Real TIs
Shop, restaurant, office, and industrial-park build-outs on Hollister Avenue and Calle Real when the drawing says steel studs. If the plan names metal, that is the bid. Commercial framing →
Storke Road and Fairview interiors
Shop partitions and house walls on Storke Road, Fairview Avenue, Los Carneros Road, Patterson Avenue, and Camino Real Marketplace. Isla Vista and UCSB sit next door — the city line still decides the permit office.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
House remodel and ADU partitions
New interior steel walls inside an existing Goleta house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Goleta Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Hollister Avenue TI, Calle Real shop, Storke Road commercial wall, rated walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, industrial-park TIs, Highway 101 corridor interiors, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Goleta house walls with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or masonry walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Goleta Streets, ZIP, and Permits
Goleta is an incorporated city in Santa Barbara County. This page uses street ZIP 93117. 93116 and 93118 are Goleta P.O. Box ZIPs. 93111 is often a Santa Barbara mailing ZIP that still covers Old Town Goleta and unincorporated Goleta Valley. Area codes are 805 and 820. Isla Vista is unincorporated. UCSB is campus. Text the street so the bid matches City of Goleta — not City of Santa Barbara Building, not Santa Barbara County Building at 123 E. Anacamu Street, and not an Isla Vista address that only uses a Goleta mailing ZIP.
Permits for City of Goleta addresses run through the City of Goleta Building and Safety Division, 130 Cremona Drive, Goleta, CA 93117. Call (805) 961-7552 for Building. Inspection requests: (805) 961-7553 or building.inspector@cityofgoleta.gov at least one business day ahead. Email buildinggroup@cityofgoleta.gov. Apply at goleta.onlinegovt.com. City Hall main line is (805) 961-7500. City of Santa Barbara Building is a different office. Santa Barbara County Building at 123 E. Anacamu Street is a different office. City of Carpinteria Building is a different office.
Santa Barbara sits east. Isla Vista and UCSB sit south of Hollister toward the ocean. Hope Ranch sits southeast. Unincorporated Goleta Valley still uses a Goleta name. Text the street so the bid matches City of Goleta — not a Santa Barbara desk, not a county counter on Anacamu Street, and not an Isla Vista rental that only says Goleta on the mail.
Old Town and the commercial spine sit on Hollister Avenue and Calle Real. Storke Road, Fairview Avenue, Los Carneros Road, Patterson Avenue, Turnpike Road, and Camino Real Marketplace are the usual approaches. City Hall sits on Cremona Drive. Occupied houses, student rentals, and open shops change the layout — not the stud spec.
The usual mismatch is treating a Hollister Avenue tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold the building up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Goleta Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Goleta, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, house remodel, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Goleta, CA
This page is steel and metal stud framing in Goleta — 93117 street ZIP, City of Goleta, Santa Barbara County — from our Fairfield shop. Building and Safety is at 130 Cremona Drive. Need the board hung and finished on the same job? Services → · Commercial framing: Commercial → · Contact: Contact →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No claim that Goleta is Santa Barbara, Isla Vista, or UCSB. No Santa Barbara or County desk for a City of Goleta street address. No storefront on Hollister Avenue. No structural steel building. No promise that metal studs hold the building up. No claim that every 93117 or 93111 address is inside city limits. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. Santa Barbara, Isla Vista, UCSB, Hope Ranch, and Santa Barbara County unincorporated areas are different places. This page is Goleta, CA, ZIP 93117, City of Goleta, Santa Barbara County — text the street so the permit office matches the address.
Goleta Metal Stud FAQs
Do you do steel / metal stud framing in Goleta?
Yes. Interior light-gauge metal stud framing in Goleta, CA from our Fairfield shop — partitions, Hollister Avenue and Calle Real TIs, Storke Road interiors, house walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Goleta the same as Santa Barbara or Isla Vista?
No. Goleta is its own incorporated city. Santa Barbara sits east. Isla Vista is unincorporated. UCSB is campus. Building permits for this page run through City of Goleta Building and Safety at 130 Cremona Drive — not City of Santa Barbara and not County Building on Anacamu Street.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Goleta houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Hollister Avenue TIs, Calle Real shops, Storke Road commercial partitions, rated walls, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Hollister Avenue or Calle Real?
Yes. Occupied retail, restaurant, office, and industrial-park tenant improvements on Hollister Avenue, Calle Real, Storke Road, and Fairview Avenue are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Goleta buildings?
Yes. Floors are protected and the layout is planned around an occupied house or an open shop. A full TI is still a construction job — plan rooms.
Does 93117 only cover the City of Goleta?
93117 is the Goleta street ZIP. It also covers Isla Vista and other unincorporated land. 93111 is often a Santa Barbara mailing ZIP on Old Town Goleta streets. Text the street so the bid matches City of Goleta — not Santa Barbara County Building in Santa Barbara.
Do you work Hollister Avenue, Calle Real, and Storke Road?
Yes. Hollister Avenue, Calle Real, Storke Road, Fairview Avenue, Los Carneros Road, Patterson Avenue, Turnpike Road, Camino Real Marketplace, Cremona Drive, and other City of Goleta addresses are on this framing page. Text the street with the photos.
What ZIP does this Goleta page cover?
This page covers 93117, the Goleta street ZIP. Text the street with the photos so the bid matches City of Goleta — not Santa Barbara 93101 and not Isla Vista unincorporated.
Who issues the permit in Goleta?
City of Goleta Building and Safety, 130 Cremona Drive, Goleta, CA 93117. Call (805) 961-7552 for Building. Inspections: (805) 961-7553. Apply at goleta.onlinegovt.com. City of Santa Barbara Building is a different office. Santa Barbara County Building at 123 E. Anacamu Street is a different office.
How much does metal stud framing cost in Goleta?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else. Work at a City of Goleta address uses City of Goleta Building and Safety — not a Santa Barbara, Isla Vista, UCSB, or Santa Barbara County unincorporated permit.
Need Goleta Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099