Glendale, CA 91201–91208 • Jewel City • Los Angeles County • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Glendale, CA
Light-gauge steel and metal stud framing in Glendale — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Brand Boulevard offices, Broadway and Colorado Street shops, Galleria and Americana interiors, and house rooms in Rossmoyne, Verdugo Woodlands, and Chevy Chase Canyon. A downtown TI and a hillside remodel are not the same stud job.
Glendale Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Glendale storefront. This page is steel / metal stud framing in Glendale, CA — Brand Boulevard, Broadway, Colorado Street, Central Avenue, Glendale Avenue, Glenoaks Boulevard, Pacific Avenue, Verdugo Road, San Fernando Road, and Honolulu Avenue when the parcel is Glendale.
Text “Glendale” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Glendale
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 91201–91208. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, medical, and office build-outs on Brand Boulevard, Broadway, Colorado Street, and Central Avenue — including downtown work near the Galleria and The Americana at Brand. If the drawing says steel studs, that is the bid. Commercial framing →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Glendale house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Glendale Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Brand Boulevard TI, Broadway and Colorado shops, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or hillside structure that hold the house up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, door-heavy restaurant TI, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Glendale house walls with no commercial spec — rooms in Rossmoyne, Adams Hill, Tropico, and the Verdugo streets | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Brand Boulevard vs Colorado vs the Verdugos
Glendale is an incorporated city in Los Angeles County — the Jewel City — about ten miles north of Downtown Los Angeles, between Burbank, Pasadena, La Cañada Flintridge, La Crescenta-Montrose, and the Los Angeles neighborhoods of Atwater Village, Eagle Rock, and Glassell Park. It is not Glendora. Core city ZIPs run 91201 through 91208 and 91210. Permits inside city limits run through the City of Glendale, not Los Angeles County and not Burbank.
Brand Boulevard is the downtown spine — offices, the Alex Theatre block, The Americana at Brand, and the Glendale Galleria across Broadway and Colorado. Central Avenue and Glendale Avenue take more downtown and mid-city work. Glenoaks and Pacific carry North Glendale shops. San Fernando Road and Grand Central take industrial and corridor buildings. Verdugo Road, Chevy Chase, and the canyon streets take hillside houses. Montrose Shopping Park on Honolulu Avenue is Glendale’s official Old Town when the parcel sits inside the city line.
The usual mismatch is treating a Brand Boulevard tenant wall like a bedroom 2×4 — or promising a factory-flat skim on a Verdugo hillside house wall that was never framed straight. Interior metal studs do not hold a canyon house up. Occupied houses, open shops, and after-hours mall suites need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Glendale Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Glendale, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Glendale, CA
This page is steel and metal stud framing in Glendale — an incorporated Los Angeles County city, from our Fairfield shop. Building permits inside city limits run through the City of Glendale Community Development Department. A 91214 La Crescenta mailing address is not automatically a Glendale permit. Text the street. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Glendale address. No structural steel building. No promise that metal studs hold a Verdugo canyon house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Glendale — not Glendora, Burbank, Pasadena, or unincorporated La Crescenta.
Glendale Metal Stud FAQs
Do you do steel / metal stud framing in Glendale?
Yes. Interior light-gauge metal stud framing in Glendale, CA from our Fairfield shop — partitions, TI walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Glendale the same as Glendora?
No. Glendale is the Jewel City next to Burbank and Pasadena. Glendora is a different San Gabriel Valley city farther east. Permits, streets, and the bid are not interchangeable — text the street so we bid the right parcel.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and hillside structure that hold the house up are a different contractor.
Do Glendale houses use metal studs or wood?
Most house walls here are still wood. Metal wins on commercial TI, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Brand, Broadway, or Colorado?
Yes. Occupied retail, restaurant, and office TIs on Brand Boulevard, Broadway, Colorado Street, and Central Avenue — including suites near the Galleria and The Americana at Brand — are a usual request. New partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Glendale buildings?
Yes. Floors are protected and the layout is planned around an open shop, an after-hours suite, or an occupied house. A full TI is still a construction job — plan rooms.
Do you work Brand, Glenoaks, Pacific, and Verdugo?
Yes. Brand Boulevard, Broadway, Colorado Street, Central Avenue, Glendale Avenue, Glenoaks Boulevard, Pacific Avenue, Verdugo Road, San Fernando Road, and Honolulu Avenue (when the parcel is Glendale) are on the same framing page. Text the street with the photos.
How much does metal stud framing cost in Glendale?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Glendale Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099