Fullerton, CA 92831–92835 • North Orange County • Incorporated 1904 • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Fullerton, CA
Light-gauge steel and metal stud framing in Fullerton — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Harbor Boulevard shops, Downtown and SoCo suites, Chapman and Commonwealth interiors, and house remodels. Fullerton is Orange County. Harbor Boulevard does not stay in one city.
Fullerton Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not a Fullerton storefront. This page is steel / metal stud framing in Fullerton, CA — Harbor Boulevard, Commonwealth Avenue, Chapman Avenue, State College Boulevard, Orangethorpe, and Downtown / SoCo.
Text “Fullerton” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it. The street still decides which city desk reviews the wall.
Metal Stud Work We Do in Fullerton
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 92831, 92832, 92833, and 92835. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, medical, and office build-outs on Harbor Boulevard, Commonwealth Avenue, Chapman Avenue, and State College Boulevard. If the drawing says steel studs, that is the bid. Commercial framing →
Downtown, campus, and plaza interiors
Shop partitions, restaurant walls, and rated assemblies in Downtown Fullerton, the SoCo District, Fullerton College blocks on Chapman, and CSUF-edge suites on State College Boulevard.
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Fullerton house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on a Fullerton Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Harbor Boulevard TI, Downtown and SoCo shops, Chapman and Commonwealth interiors, State College suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or structure that hold the building up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, restaurant TIs, office interiors, campus-adjacent suites, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most house walls in Sunny Hills, West Coyote Hills, Golden Hills, and the tracts off Euclid, Bastanchury, Malvern, and Gilbert with no commercial spec | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Harbor Blvd vs Downtown vs the City Line
Fullerton is an incorporated North Orange County city — 1904 — with standard ZIPs 92831, 92832, 92833, and 92835, plus P.O. boxes 92834, 92836, 92837, and 92838. It uses the 714 / 657 overlay. Anaheim sits south. Brea sits north. Placentia sits east. La Habra sits northwest. Buena Park sits west. Permits inside city limits run through the City of Fullerton Building & Safety Division at 303 W. Commonwealth Avenue, City Hall, 92832. Sharing Harbor Boulevard with Anaheim does not share a city hall.
Harbor Boulevard, Commonwealth Avenue, Chapman Avenue, Orangethorpe Avenue, State College Boulevard, and Brea Boulevard carry the shops, restaurants, and offices. Euclid Street, Malvern Avenue, Bastanchury Road, Lemon Street, and Gilbert Street pick up more house streets and neighborhood suites. The 57 and 91 freeways sit on the edges. Occupied shops, campus-adjacent offices, and tract houses change the layout — not the stud spec.
Downtown Fullerton, SoCo, Sunny Hills, West Coyote Hills, Golden Hills, Fullerton College on Chapman, and CSUF-edge addresses inside city limits are all this page. A State College Boulevard suite can sit in Fullerton or next door in another city. A Harbor shop south of town can already be Anaheim. Text the street so we bid the right desk.
The usual mismatch is treating a Harbor or Downtown tenant wall like a bedroom 2×4 — or hanging a Level 5 commercial finish on house framing that only needed wood hang-only. Interior metal studs do not hold a house or a campus building up. Occupied houses, open Harbor shops, and after-hours offices need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How a Fullerton Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Fullerton, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, Harbor shop, Downtown / SoCo suite, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Fullerton, CA
This page is steel and metal stud framing in Fullerton — ZIPs 92831, 92832, 92833, and 92835, an incorporated North Orange County city, from our Fairfield shop. Permits inside city limits run through the City of Fullerton, not Anaheim, Brea, Placentia, La Habra, or Buena Park. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Fullerton address. No structural steel building. No promise that metal studs hold a house or a campus building up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Fullerton — not Anaheim, Brea, Placentia, La Habra, or Buena Park.
Fullerton Metal Stud FAQs
Do you do steel / metal stud framing in Fullerton?
Yes. Interior light-gauge metal stud framing in Fullerton, CA from our Fairfield shop — partitions, Harbor Boulevard and Downtown TIs, Chapman and Commonwealth interiors, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Fullerton the same as Anaheim or Brea?
No. They are three Orange County cities. Harbor Boulevard and State College Boulevard cross more than one city hall. They do not share a building department.
Is a Harbor Boulevard shop in Fullerton or Anaheim?
It depends on the address. Harbor runs through Downtown Fullerton and keeps going south. If the job address is Fullerton, the permit desk is City of Fullerton at 303 W. Commonwealth Avenue — not Anaheim.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and structure that hold the building up are a different contractor.
Do Fullerton houses use metal studs or wood?
Most house walls here are still wood. Metal wins on Harbor, Downtown, Chapman, and State College TIs, shop and office interiors, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Harbor, Chapman, or Commonwealth?
Yes. Occupied retail and restaurant TIs on Harbor Boulevard, Commonwealth Avenue, Chapman Avenue, State College Boulevard, and Orangethorpe are a usual request — new partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Fullerton buildings?
Yes. Floors are protected and the layout is planned around an occupied house, an open Harbor or SoCo shop, a campus-adjacent office, or after-hours suite. A full TI is still a construction job — plan rooms.
Do you work Downtown, Sunny Hills, and the college edge?
Yes. Downtown Fullerton, SoCo, Sunny Hills, West Coyote Hills, Golden Hills, Fullerton College blocks, and CSUF-edge addresses inside city limits are on the same framing page. Text the street with the photos.
Who issues the permit in Fullerton?
The City of Fullerton Building & Safety Division at 303 W. Commonwealth Avenue, City Hall, CA 92832. Anaheim, Brea, Placentia, La Habra, and Buena Park are different desks — that is why the street matters.
How much does metal stud framing cost in Fullerton?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Fullerton Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099