Encino, CA 91316–91436 • San Fernando Valley, City of Los Angeles • Family-Owned Since 1970 • CSLB #265709
Steel / Metal Stud Framing in Encino, CA
Light-gauge steel and metal stud framing in Encino — interior partitions, tenant-improvement walls, soffits, and fire-rated assemblies. We frame the wall so the drywall stays flat: Ventura Boulevard shops, Encino Commons and medical-office interiors, Balboa and White Oak suites, and house rooms in the flats and Encino Hills. A boulevard TI and a hillside remodel are not the same stud job.
Encino Framing, Fairfield Crew
Ron Hogan Drywall has been family-owned since 1970. We are based in Fairfield, not an Encino storefront. This page is steel / metal stud framing in Encino, CA 91316 and 91436 — Ventura Boulevard, Balboa Boulevard, White Oak Avenue, Hayvenhurst Avenue, Haskell Avenue, Lindley Avenue, Burbank Boulevard, Magnolia Boulevard, and the Encino Hills streets off Mulholland.
Text “Encino” with the plans or a photo of the room. If the scope is interior metal studs — or frame-and-hang on the same trip — we schedule it.
Metal Stud Work We Do in Encino
Interior partition walls
Track, studs, and bracing for new rooms, office layouts, and non-load-bearing walls in 91316 and 91436. This is the skeleton the board hangs on.
Tenant improvement framing
Retail, restaurant, medical, and office build-outs on Ventura Boulevard — Encino Commons between White Oak and Balboa, Encino Town Center, and the mid-rise medical suites. If the drawing says steel studs, that is the bid. Commercial framing →
Soffits, bulkheads, and chases
Dropped ceilings, kitchen hood wraps, and framed openings so boxes, ducts, and lights have a home before drywall.
Fire-rated and heavier-gauge walls
Listed assemblies, Type X board later, and heavier studs when the plan or the engineer calls for them. The rating is the whole wall — not the stud alone.
Remodel and ADU partitions
New interior steel walls inside an existing Encino house when the finish needs a straighter plane than bowed lumber. Wood structure stays wood unless the plan says otherwise. Metal vs wood →
Frame and hang together
One crew frames the metal, hangs the board, and can finish it. Split bids leave missing backing and wavy walls. Services →
Which Stud Belongs on an Encino Job
| Stud | Use it when | Skip it when |
|---|---|---|
| Light-gauge metal (what we frame) | Ventura Boulevard TI, Encino Commons shops, medical-office suites, rated commercial walls, or a remodel that needs a flat plane for Level 4 / Level 5 | You need beams, columns, or hillside structure that hold the house up — that is a different contractor |
| 25-ga interior studs | Short, non-load-bearing partitions with a normal finish | Tall walls, high-abuse corridors, or a spec that names 20-ga or heavier |
| 20-ga / heavier track and studs | Taller commercial walls, door-heavy restaurant TI, or engineer notes | A simple closet that never needed the extra gauge |
| Wood studs | Most Encino house walls with no commercial spec — rooms in the flats north of Ventura and many Encino Hills interiors | The plan already says steel, or the finish will show every bow |
| Furring / hat channel on masonry | Concrete or block walls that need a cavity for boxes before drywall | Glue-only board on a finished living space |
Compare studs: Metal vs wood → · Cost: Is steel expensive? → · Why it stays flat: Steel benefits →
Ventura Boulevard vs the Flats vs Encino Hills
Encino is a neighborhood in the City of Los Angeles, in the southern San Fernando Valley — ZIPs 91316 and 91436 — between Tarzana, Sherman Oaks, Lake Balboa, the Sepulveda Basin, and the Santa Monica Mountains. It is not its own city and it is not Tarzana. Boundaries run roughly from Lindley to the 405 and from Victory to Mulholland. Permits run through Los Angeles Department of Building and Safety, not a separate Encino city hall.
Ventura Boulevard is the commercial spine. Encino Commons — Ventura between White Oak and Balboa — is the walkable shop and restaurant core. Medical and mid-rise office suites cluster on Ventura near Hayvenhurst, Balboa, and Haskell. Balboa, White Oak, and Hayvenhurst take more north-south traffic toward the 101 and the basin. South of Ventura, Encino Hills and Royal Oaks climb toward Mulholland. North of Ventura the flats hold mid-century houses, condos, and the streets toward Burbank and Victory.
The usual mismatch is treating a Ventura Boulevard tenant wall like a bedroom 2×4 — or promising a factory-flat skim on an Encino Hills house wall that was never framed straight. Interior metal studs do not hold a hillside house up. Occupied houses and open shops need a clean layout, backing for cabinets and TVs, and a stud plane the finish can live with. Matching the spec still beats guessing the gauge. Send the plan sheet or a wide shot of the room. That photo decides wood hang-only vs new metal studs faster than a ZIP code.
How an Encino Metal-Stud Job Runs
1. Photos + place
Text (925) 791-9099 Encino, the street, and the plans or a photo of the wall.
2. Name the wall
Partition, TI layout, soffit, rated assembly, or frame-and-hang. We will say if the existing framing can take the finish.
3. We frame it
Protect the space. Track, studs, backing, hang if scoped. Ready for inspection and board. 12-month warranty on our work.
Encino, CA
This page is steel and metal stud framing in Encino — ZIPs 91316 and 91436, a City of Los Angeles neighborhood in the San Fernando Valley, from our Fairfield shop. Permits run through LADBS, not an Encino city hall. Need the board hung and finished on the same job? Services → · Framing basics: Framing guide →
Office: 2380 Palmer Circle, Fairfield, CA · CSLB #265709 · Check the number on cslb.ca.gov.
Not on This Page
No fake Encino address. No structural steel building. No promise that metal studs hold an Encino Hills house up. We frame interior light-gauge walls and hang drywall on wood or steel. A closet does not need a shaft-wall spec. This page is Encino — not Tarzana, Sherman Oaks, Lake Balboa, or Van Nuys.
Encino Metal Stud FAQs
Do you do steel / metal stud framing in Encino?
Yes. Interior light-gauge metal stud framing in Encino, CA 91316 and 91436 from our Fairfield shop — partitions, TI walls, soffits, heavier-gauge spec walls, and frame-and-hang.
Is Encino its own city?
No. Encino is a neighborhood in the City of Los Angeles, in the San Fernando Valley. Permits run through LADBS. Tarzana, Sherman Oaks, and Lake Balboa are different places — text the street so we bid the right parcel.
Is this structural steel?
No. We frame interior light-gauge studs, track, headers, and soffits. Beams, columns, and hillside structure that hold the house up are a different contractor.
Do Encino houses use metal studs or wood?
Most house walls here are still wood. Metal wins on commercial TI, rated partitions, and remodels that need a straighter plane for a smooth finish. If the drawing names the stud, that wins.
Can you frame a shop on Ventura Boulevard or Encino Commons?
Yes. Occupied retail, restaurant, and medical TIs on Ventura Boulevard between White Oak and Balboa — and the office suites near Hayvenhurst and Haskell — are a usual request. New partitions, soffits, and backing, then hang if the scope includes board.
Do you work occupied Encino buildings?
Yes. Floors are protected and the layout is planned around an open shop or an occupied house. A full TI is still a construction job — plan rooms.
Do you work Ventura, Balboa, White Oak, and Encino Hills?
Yes. Ventura Boulevard, Balboa Boulevard, White Oak Avenue, Hayvenhurst Avenue, Haskell Avenue, Lindley Avenue, Burbank Boulevard, Magnolia Boulevard, and the Encino Hills streets off Mulholland are on the same framing page. Text the street with the photos.
How much does metal stud framing cost in Encino?
It follows the gauge, wall height, how cut-up the layout is, fire rating, access, and whether we only frame or also hang and finish. Photos or plans first. Written scope — no hidden fees.
Are you licensed in California?
Yes. CSLB #265709. Look it up before you book us or anyone else.
Need Encino Walls Framed Straight — Then Hung?
Call the family-owned crew that has been framing interiors and hanging board since 1970.
Call / Text (925) 791-9099